Let's move driver's platform data definitions from include/linux/input/
into include/linux/platform_data/ so that it stays with the rest of
platform data definitions.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
drivers/input/touchscreen/pixcir_i2c_ts.c | 2 +-
include/linux/input/pixcir_ts.h | 64 -----------------------------
include/linux/platform_data/pixcir_i2c_ts.h | 64 +++++++++++++++++++++++++++++
3 files changed, 65 insertions(+), 65 deletions(-)
delete mode 100644 include/linux/input/pixcir_ts.h
create mode 100644 include/linux/platform_data/pixcir_i2c_ts.h
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 8f3e243..ccafa75 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -24,11 +24,11 @@
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/input/mt.h>
-#include <linux/input/pixcir_ts.h>
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/of_device.h>
+#include <linux/platform_data/pixcir_i2c_ts.h>
#define PIXCIR_MAX_SLOTS 5 /* Max fingers supported by driver */
diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h
deleted file mode 100644
index 7bae83b..0000000
--- a/include/linux/input/pixcir_ts.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef _PIXCIR_I2C_TS_H
-#define _PIXCIR_I2C_TS_H
-
-/*
- * Register map
- */
-#define PIXCIR_REG_POWER_MODE 51
-#define PIXCIR_REG_INT_MODE 52
-
-/*
- * Power modes:
- * active: max scan speed
- * idle: lower scan speed with automatic transition to active on touch
- * halt: datasheet says sleep but this is more like halt as the chip
- * clocks are cut and it can only be brought out of this mode
- * using the RESET pin.
- */
-enum pixcir_power_mode {
- PIXCIR_POWER_ACTIVE,
- PIXCIR_POWER_IDLE,
- PIXCIR_POWER_HALT,
-};
-
-#define PIXCIR_POWER_MODE_MASK 0x03
-#define PIXCIR_POWER_ALLOW_IDLE (1UL << 2)
-
-/*
- * Interrupt modes:
- * periodical: interrupt is asserted periodicaly
- * diff coordinates: interrupt is asserted when coordinates change
- * level on touch: interrupt level asserted during touch
- * pulse on touch: interrupt pulse asserted druing touch
- *
- */
-enum pixcir_int_mode {
- PIXCIR_INT_PERIODICAL,
- PIXCIR_INT_DIFF_COORD,
- PIXCIR_INT_LEVEL_TOUCH,
- PIXCIR_INT_PULSE_TOUCH,
-};
-
-#define PIXCIR_INT_MODE_MASK 0x03
-#define PIXCIR_INT_ENABLE (1UL << 3)
-#define PIXCIR_INT_POL_HIGH (1UL << 2)
-
-/**
- * struct pixcir_irc_chip_data - chip related data
- * @max_fingers: Max number of fingers reported simultaneously by h/w
- * @has_hw_ids: Hardware supports finger tracking IDs
- *
- */
-struct pixcir_i2c_chip_data {
- u8 max_fingers;
- bool has_hw_ids;
-};
-
-struct pixcir_ts_platform_data {
- int x_max;
- int y_max;
- int gpio_attb; /* GPIO connected to ATTB line */
- struct pixcir_i2c_chip_data chip;
-};
-
-#endif
diff --git a/include/linux/platform_data/pixcir_i2c_ts.h b/include/linux/platform_data/pixcir_i2c_ts.h
new file mode 100644
index 0000000..7bae83b
--- /dev/null
+++ b/include/linux/platform_data/pixcir_i2c_ts.h
@@ -0,0 +1,64 @@
+#ifndef _PIXCIR_I2C_TS_H
+#define _PIXCIR_I2C_TS_H
+
+/*
+ * Register map
+ */
+#define PIXCIR_REG_POWER_MODE 51
+#define PIXCIR_REG_INT_MODE 52
+
+/*
+ * Power modes:
+ * active: max scan speed
+ * idle: lower scan speed with automatic transition to active on touch
+ * halt: datasheet says sleep but this is more like halt as the chip
+ * clocks are cut and it can only be brought out of this mode
+ * using the RESET pin.
+ */
+enum pixcir_power_mode {
+ PIXCIR_POWER_ACTIVE,
+ PIXCIR_POWER_IDLE,
+ PIXCIR_POWER_HALT,
+};
+
+#define PIXCIR_POWER_MODE_MASK 0x03
+#define PIXCIR_POWER_ALLOW_IDLE (1UL << 2)
+
+/*
+ * Interrupt modes:
+ * periodical: interrupt is asserted periodicaly
+ * diff coordinates: interrupt is asserted when coordinates change
+ * level on touch: interrupt level asserted during touch
+ * pulse on touch: interrupt pulse asserted druing touch
+ *
+ */
+enum pixcir_int_mode {
+ PIXCIR_INT_PERIODICAL,
+ PIXCIR_INT_DIFF_COORD,
+ PIXCIR_INT_LEVEL_TOUCH,
+ PIXCIR_INT_PULSE_TOUCH,
+};
+
+#define PIXCIR_INT_MODE_MASK 0x03
+#define PIXCIR_INT_ENABLE (1UL << 3)
+#define PIXCIR_INT_POL_HIGH (1UL << 2)
+
+/**
+ * struct pixcir_irc_chip_data - chip related data
+ * @max_fingers: Max number of fingers reported simultaneously by h/w
+ * @has_hw_ids: Hardware supports finger tracking IDs
+ *
+ */
+struct pixcir_i2c_chip_data {
+ u8 max_fingers;
+ bool has_hw_ids;
+};
+
+struct pixcir_ts_platform_data {
+ int x_max;
+ int y_max;
+ int gpio_attb; /* GPIO connected to ATTB line */
+ struct pixcir_i2c_chip_data chip;
+};
+
+#endif
--
2.4.3.573.g4eafbef
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
