Re: [RFC_v2 2/4] HID: hid-sony: Add IIO buffer support for SixAxis Controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 24/06/15 01:30, Simon Wood wrote:
> ---
>  drivers/hid/hid-sony.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 47 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
> index c4686e3..b7a7f0d 100644
> --- a/drivers/hid/hid-sony.c
> +++ b/drivers/hid/hid-sony.c
> @@ -37,6 +37,11 @@
>  #include <linux/idr.h>
>  #include <linux/input/mt.h>
>  #include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
This sysfs one shouldn't have become a dependency as part of adding buffered support...

> +#include <linux/iio/buffer.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/triggered_buffer.h>
> +#include <linux/interrupt.h>
>  
>  #include "hid-ids.h"
>  
> @@ -852,6 +857,7 @@ enum sony_iio_axis {
>  
>  struct sony_iio {
>  	struct sony_sc *sc;
> +	u8 buff[16];		/* 3x 16-bit + padding + timestamp */
Make it u16 buff[8] to cut down on the casts below.
>  #endif
>  };
>  
> @@ -861,6 +867,7 @@ static __u8 *sixaxis_fixup(struct hid_device *hdev, __u8 *rdesc,
>  	*rsize = sizeof(sixaxis_rdesc);
>  	return sixaxis_rdesc;
>  }
> +
Some stray white space cleanups in here that should be in a separate patch.
>  static __u8 *ps3remote_fixup(struct hid_device *hdev, __u8 *rdesc,
>  			     unsigned int *rsize)
>  {
> @@ -1841,12 +1848,20 @@ static int sony_iio_read_raw(struct iio_dev *indio_dev,
>  	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |          \
>  		BIT(IIO_CHAN_INFO_OFFSET),                              \
>  	.address = AXIS_ACC_##_axis,                                    \
> +	.scan_index = AXIS_ACC_##_axis,                                 \
> +	.scan_type = {                                                  \
> +		.sign = 's',                                            \
> +		.realbits = 16,                                         \
> +		.storagebits = 16,                                      \
> +		.shift = 0,                                             \
Don't bother specifying shift=0 as it's the default.
> +	},                                                              \
>  }
>  
>  static const struct iio_chan_spec sony_sixaxis_channels[] = {
>  	SONY_ACC_CHANNEL(X),
>  	SONY_ACC_CHANNEL(Y),
>  	SONY_ACC_CHANNEL(Z),
> +	IIO_CHAN_SOFT_TIMESTAMP(3),
>  };
>  
>  static const struct iio_info sony_iio_info = {
> @@ -1854,6 +1869,25 @@ static const struct iio_info sony_iio_info = {
>  	.driver_module = THIS_MODULE,
>  };
>  
> +static irqreturn_t sony_iio_trigger_handler(int irq, void *p)
> +{
> +	struct iio_poll_func *pf = p;
> +	struct iio_dev *indio_dev = pf->indio_dev;
> +	struct sony_iio *data = iio_priv(indio_dev);
> +	int64_t time_ns = iio_get_time_ns();
> +	int bit, i = 0;
> +
> +	for_each_set_bit(bit, indio_dev->active_scan_mask,
> +			 indio_dev->masklength) {
> +		((u16 *)data->buff)[i++] = data->sc->last_data[bit];
> +	}
> +
> +	iio_push_to_buffers_with_timestamp(indio_dev, data->buff, time_ns);
Put the iio_get_time_ns call directly in rather than bothering with the local
variable.
> +	iio_trigger_notify_done(indio_dev->trig);
> +
> +	return IRQ_HANDLED;
> +}
> +
>  static int sony_iio_probe(struct sony_sc *sc)
>  {
>  	struct hid_device *hdev = sc->hdev;
> @@ -1871,18 +1905,27 @@ static int sony_iio_probe(struct sony_sc *sc)
>  
>  	indio_dev->dev.parent = &hdev->dev;
>  	indio_dev->name = dev_name(&hdev->dev);
> -	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_TRIGGERED;
>  	indio_dev->info = &sony_iio_info;
>  	indio_dev->channels = sony_sixaxis_channels;
> -	indio_dev->num_channels = 3;
> +	indio_dev->num_channels = ARRAY_SIZE(sony_sixaxis_channels);
> +
> +	ret = iio_triggered_buffer_setup(indio_dev, NULL,
> +			sony_iio_trigger_handler, NULL);
> +	if (ret < 0) {
> +		dev_err(&hdev->dev, "unable to setup iio triggered buffer\n");
> +		goto err;
> +	}
>  
>  	ret = iio_device_register(indio_dev);
>  	if (ret < 0) {
>  		hid_err(hdev, "Unable to register iio device\n");
> -		goto err;
> +		goto err_buffer_cleanup;
>  	}
>  	return 0;
>  
> +err_buffer_cleanup:
> +	iio_triggered_buffer_cleanup(indio_dev);
>  err:
>  	kfree(indio_dev);
>  	sc->indio_dev = NULL;
> @@ -1895,6 +1938,7 @@ static void sony_iio_remove(struct sony_sc *sc)
>  		return;
>  
>  	iio_device_unregister(sc->indio_dev);
> +	iio_triggered_buffer_cleanup(sc->indio_dev);
>  	kfree(sc->indio_dev);
>  	sc->indio_dev = NULL;
>  }
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux