Re: [RESEND PATCH V4 1/1] input: misc: da9063: OnKey driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Steve,

On Thu, Jun 04, 2015 at 12:02:32PM +0100, S Twiss wrote:
> From: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
> 
> Add OnKey driver support for DA9063
> 
> Signed-off-by: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
> 
> ---
> The changes made in PATCH V3 have been taken from the DA9062 OnKey review
> thread. Please see https://lkml.org/lkml/2015/4/29/406 for more information
> on this.
> 
> Version History
> 
> Changes in V4
>  - No change, just a resend.

Sorry for the delay.

I took the liberty of rearranging the code a bit and converting it to
devm* fully, does the version below still work for you?

Thanks.

-- 
Dmitry


Input: add OnKey driver for DA9063 MFD part

From: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>

Add OnKey driver support for DA9063

Signed-off-by: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
 drivers/input/misc/Kconfig        |   10 ++
 drivers/input/misc/Makefile       |    1 
 drivers/input/misc/da9063_onkey.c |  226 +++++++++++++++++++++++++++++++++++++
 3 files changed, 237 insertions(+)
 create mode 100644 drivers/input/misc/da9063_onkey.c

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index e5c4de2..d4f0a81 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -610,6 +610,16 @@ config INPUT_DA9055_ONKEY
 	  To compile this driver as a module, choose M here: the module
 	  will be called da9055_onkey.
 
+config INPUT_DA9063_ONKEY
+	tristate "Dialog DA9063 OnKey"
+	depends on MFD_DA9063
+	help
+	  Support the ONKEY of Dialog DA9063 Power Management IC as an
+	  input device reporting power button statue.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called da9063_onkey.
+
 config INPUT_DM355EVM
 	tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
 	depends on MFD_DM355EVM_MSP
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index d317947..53df07d 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_INPUT_CMA3000_I2C)		+= cma3000_d0x_i2c.o
 obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
 obj-$(CONFIG_INPUT_DA9052_ONKEY)	+= da9052_onkey.o
 obj-$(CONFIG_INPUT_DA9055_ONKEY)	+= da9055_onkey.o
+obj-$(CONFIG_INPUT_DA9063_ONKEY)	+= da9063_onkey.o
 obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
 obj-$(CONFIG_INPUT_E3X0_BUTTON)		+= e3x0-button.o
 obj-$(CONFIG_INPUT_DRV260X_HAPTICS)	+= drv260x.o
diff --git a/drivers/input/misc/da9063_onkey.c b/drivers/input/misc/da9063_onkey.c
new file mode 100644
index 0000000..f577585
--- /dev/null
+++ b/drivers/input/misc/da9063_onkey.c
@@ -0,0 +1,226 @@
+/*
+ * OnKey device driver for DA9063
+ * Copyright (C) 2015  Dialog Semiconductor Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+#include <linux/mfd/da9063/core.h>
+#include <linux/mfd/da9063/pdata.h>
+#include <linux/mfd/da9063/registers.h>
+
+struct da9063_onkey {
+	struct da9063 *hw;
+	struct delayed_work work;
+	struct input_dev *input;
+	struct device *dev;
+	bool key_power;
+};
+
+static void da9063_poll_on(struct work_struct *work)
+{
+	struct da9063_onkey *onkey = container_of(work, struct da9063_onkey,
+						  work.work);
+	unsigned int val;
+	int fault_log = 0;
+	bool poll = true;
+	int error;
+
+	/* Poll to see when the pin is released */
+	error = regmap_read(onkey->hw->regmap, DA9063_REG_STATUS_A, &val);
+	if (error) {
+		dev_err(onkey->dev,
+			"Failed to read ON status: %d\n", error);
+		goto err_poll;
+	}
+
+	if (!(val & DA9063_NONKEY)) {
+		error = regmap_update_bits(onkey->hw->regmap,
+					   DA9063_REG_CONTROL_B,
+					   DA9063_NONKEY_LOCK, 0);
+		if (error) {
+			dev_err(onkey->dev,
+				"Failed to reset the Key Delay %d\n", error);
+			goto err_poll;
+		}
+
+		input_report_key(onkey->input, KEY_POWER, 0);
+		input_sync(onkey->input);
+
+		poll = false;
+	}
+
+	/*
+	 * If the fault log KEY_RESET is detected, then clear it
+	 * and shut down the system.
+	 */
+	error = regmap_read(onkey->hw->regmap,
+			    DA9063_REG_FAULT_LOG, &fault_log);
+	if (error) {
+		dev_warn(&onkey->input->dev,
+			 "Cannot read FAULT_LOG: %d\n", error);
+	} else if (fault_log & DA9063_KEY_RESET) {
+		error = regmap_write(onkey->hw->regmap,
+				     DA9063_REG_FAULT_LOG,
+				     DA9063_KEY_RESET);
+		if (error) {
+			dev_warn(&onkey->input->dev,
+				 "Cannot reset KEY_RESET fault log: %d\n",
+				 error);
+		} else {
+			/* at this point we do any S/W housekeeping
+			 * and then send shutdown command
+			 */
+			dev_dbg(&onkey->input->dev,
+				 "Sending SHUTDOWN to DA9063 ...\n");
+			error = regmap_write(onkey->hw->regmap,
+					     DA9063_REG_CONTROL_F,
+					     DA9063_SHUTDOWN);
+			if (error)
+				dev_err(&onkey->input->dev,
+					"Cannot SHUTDOWN DA9063: %d\n",
+					error);
+		}
+	}
+
+err_poll:
+	if (poll)
+		schedule_delayed_work(&onkey->work, msecs_to_jiffies(50));
+}
+
+static irqreturn_t da9063_onkey_irq_handler(int irq, void *data)
+{
+	struct da9063_onkey *onkey = data;
+	unsigned int val;
+	int error;
+
+	error = regmap_read(onkey->hw->regmap, DA9063_REG_STATUS_A, &val);
+	if (onkey->key_power && !error && (val & DA9063_NONKEY)) {
+		input_report_key(onkey->input, KEY_POWER, 1);
+		input_sync(onkey->input);
+		schedule_delayed_work(&onkey->work, 0);
+		dev_dbg(onkey->dev, "KEY_POWER pressed.\n");
+	} else {
+		input_report_key(onkey->input, KEY_SLEEP, 1);
+		input_sync(onkey->input);
+		input_report_key(onkey->input, KEY_SLEEP, 0);
+		input_sync(onkey->input);
+		dev_dbg(onkey->dev, "KEY_SLEEP pressed.\n");
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void da9063_cancel_poll(void *data)
+{
+	struct da9063_onkey *onkey = data;
+
+	cancel_delayed_work_sync(&onkey->work);
+}
+
+static int da9063_onkey_probe(struct platform_device *pdev)
+{
+	struct da9063 *da9063 = dev_get_drvdata(pdev->dev.parent);
+	struct da9063_pdata *pdata = dev_get_platdata(da9063->dev);
+	struct da9063_onkey *onkey;
+	int irq;
+	int error;
+
+	onkey = devm_kzalloc(&pdev->dev, sizeof(struct da9063_onkey),
+			     GFP_KERNEL);
+	if (!onkey) {
+		dev_err(&pdev->dev, "Failed to allocate memory.\n");
+		return -ENOMEM;
+	}
+
+	onkey->dev = &pdev->dev;
+	onkey->hw = da9063;
+
+	if (pdata)
+		onkey->key_power = pdata->key_power;
+	else
+		onkey->key_power =
+			!of_property_read_bool(pdev->dev.of_node,
+					       "dlg,disable-key-power");
+
+	onkey->input = devm_input_allocate_device(&pdev->dev);
+	if (!onkey->input) {
+		dev_err(&pdev->dev, "Failed to allocated input device.\n");
+		return -ENOMEM;
+	}
+
+	onkey->input->name = DA9063_DRVNAME_ONKEY;
+	onkey->input->phys = DA9063_DRVNAME_ONKEY "/input0";
+	onkey->input->dev.parent = &pdev->dev;
+
+	if (onkey->key_power)
+		input_set_capability(onkey->input, EV_KEY, KEY_POWER);
+
+	input_set_capability(onkey->input, EV_KEY, KEY_SLEEP);
+
+	INIT_DELAYED_WORK(&onkey->work, da9063_poll_on);
+
+	error = devm_add_action(&pdev->dev, da9063_cancel_poll, onkey);
+	if (error) {
+		dev_err(&pdev->dev,
+			"Failed to add cancel poll action: %d\n",
+			error);
+		return error;
+	}
+
+	irq = platform_get_irq_byname(pdev, "ONKEY");
+	if (irq < 0) {
+		error = irq;
+		dev_err(&pdev->dev, "Failed to get platform IRQ: %d\n", error);
+		return error;
+	}
+
+	error = devm_request_threaded_irq(&pdev->dev, irq,
+					  NULL, da9063_onkey_irq_handler,
+					  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					  "ONKEY", onkey);
+	if (error) {
+		dev_err(&pdev->dev,
+			"Failed to request IRQ %d: %d\n", irq, error);
+		return error;
+	}
+
+	error = input_register_device(onkey->input);
+	if (error) {
+		dev_err(&pdev->dev,
+			"Failed to register input device: %d\n", error);
+		return error;
+	}
+
+	platform_set_drvdata(pdev, onkey);
+	return 0;
+}
+
+static struct platform_driver da9063_onkey_driver = {
+	.probe	= da9063_onkey_probe,
+	.driver	= {
+		.name	= DA9063_DRVNAME_ONKEY,
+	},
+};
+module_platform_driver(da9063_onkey_driver);
+
+MODULE_AUTHOR("S Twiss <stwiss.opensource@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("Onkey device driver for Dialog DA9063");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DA9063_DRVNAME_ONKEY);
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux