> This set of patches adds initial support for the Sony Motion Controller > via > cleaned-up initial patches from Pavel Machek, streamlines LED > initialization > and state updates, adds a comment to explain why the Sixaxis has so many > axes > and why they spill over into the multi-touch space and makes some general > cosmetic corrections. Maybe a little pointless as Jiri as already accepted, but I wanted to confirm that these patches appear work OK on my 3rd party (Intec) controller which has been problematic in the past. I have also acquired a PS Move Motion controller and note that LED settings work, but are then overridden (LED goes dark) after ~5s when connected with USB. I believe that this is a 'feature' of the controller with USB connection (and note there is no HID stream coming from the device). Does any one know of a trigger/command which will enable full USB operation? Simon. PS. I did not try BT connection as that apparently requires Bluez > 5.0, which is a pain on _that_ machine. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
