Add gpiolib driver for gpio pins placed on the LoCoMo GA.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/gpio/Kconfig | 12 ++++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-locomo.c | 170 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 183 insertions(+)
create mode 100644 drivers/gpio/gpio-locomo.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index caefe80..4542684 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -734,6 +734,18 @@ config GPIO_KEMPLD
This driver can also be built as a module. If so, the module will be
called gpio-kempld.
+config GPIO_LOCOMO
+ bool "Sharp LoCoMo GPIO support"
+ depends on MFD_LOCOMO
+ help
+ Select this to support GPIO pins on Sharp LoCoMo Grid Array found
+ in Sharp Zaurus collie and poodle models.
+
+ Sat Yes if you have such PDA, say No otherwise.
+
+ This driver can also be built as a module. If so, the module will be
+ called gpio-locomo.
+
config GPIO_LP3943
tristate "TI/National Semiconductor LP3943 GPIO expander"
depends on MFD_LP3943
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index f71bb97..98655ae 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o
+obj-$(CONFIG_GPIO_LOCOMO) += gpio-locomo.o
obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o
obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
diff --git a/drivers/gpio/gpio-locomo.c b/drivers/gpio/gpio-locomo.c
new file mode 100644
index 0000000..dd9a1ca
--- /dev/null
+++ b/drivers/gpio/gpio-locomo.c
@@ -0,0 +1,170 @@
+/*
+ * Sharp LoCoMo support for GPIO
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains all generic LoCoMo support.
+ *
+ * All initialization functions provided here are intended to be called
+ * from machine specific code with proper arguments when required.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/regmap.h>
+#include <linux/mfd/locomo.h>
+
+struct locomo_gpio {
+ struct regmap *regmap;
+
+ struct gpio_chip gpio;
+
+ u16 rising_edge;
+ u16 falling_edge;
+
+ unsigned int save_gpo;
+ unsigned int save_gpe;
+};
+
+static int locomo_gpio_get(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct locomo_gpio *lg = container_of(chip, struct locomo_gpio, gpio);
+ unsigned int gpl;
+
+ regmap_read(lg->regmap, LOCOMO_GPL, &gpl);
+
+ return gpl & BIT(offset);
+}
+
+static void locomo_gpio_set(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct locomo_gpio *lg = container_of(chip, struct locomo_gpio, gpio);
+
+ regmap_update_bits(lg->regmap, LOCOMO_GPO,
+ BIT(offset),
+ value ? BIT(offset) : 0);
+}
+
+static int locomo_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct locomo_gpio *lg = container_of(chip, struct locomo_gpio, gpio);
+
+ regmap_update_bits(lg->regmap, LOCOMO_GPD, BIT(offset), BIT(offset));
+ regmap_update_bits(lg->regmap, LOCOMO_GPE, BIT(offset), BIT(offset));
+
+ return 0;
+}
+
+static int locomo_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct locomo_gpio *lg = container_of(chip, struct locomo_gpio, gpio);
+
+ regmap_update_bits(lg->regmap, LOCOMO_GPO,
+ BIT(offset),
+ value ? BIT(offset) : 0);
+ regmap_update_bits(lg->regmap, LOCOMO_GPD, BIT(offset), 0);
+ regmap_update_bits(lg->regmap, LOCOMO_GPE, BIT(offset), 0);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int locomo_gpio_suspend(struct device *dev)
+{
+ struct locomo_gpio *lg = dev_get_drvdata(dev);
+
+ regmap_read(lg->regmap, LOCOMO_GPO, &lg->save_gpo);
+ regmap_write(lg->regmap, LOCOMO_GPO, 0x00);
+ regmap_read(lg->regmap, LOCOMO_GPE, &lg->save_gpe);
+ regmap_write(lg->regmap, LOCOMO_GPE, 0x00);
+
+ return 0;
+}
+
+static int locomo_gpio_resume(struct device *dev)
+{
+ struct locomo_gpio *lg = dev_get_drvdata(dev);
+
+ regmap_write(lg->regmap, LOCOMO_GPO, lg->save_gpo);
+ regmap_write(lg->regmap, LOCOMO_GPE, lg->save_gpe);
+
+ return 0;
+}
+static SIMPLE_DEV_PM_OPS(locomo_gpio_pm,
+ locomo_gpio_suspend, locomo_gpio_resume);
+#define LOCOMO_GPIO_PM (&locomo_gpio_pm)
+#else
+#define LOCOMO_GPIO_PM NULL
+#endif
+
+static int locomo_gpio_probe(struct platform_device *pdev)
+{
+ struct locomo_gpio *lg;
+ int ret;
+ struct locomo_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
+
+ lg = devm_kzalloc(&pdev->dev, sizeof(struct locomo_gpio),
+ GFP_KERNEL);
+ if (!lg)
+ return -ENOMEM;
+
+ lg->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!lg->regmap)
+ return -EINVAL;
+
+ platform_set_drvdata(pdev, lg);
+
+ regmap_write(lg->regmap, LOCOMO_GPO, 0x00);
+ regmap_write(lg->regmap, LOCOMO_GPE, 0x00);
+ regmap_write(lg->regmap, LOCOMO_GPD, 0x00);
+ regmap_write(lg->regmap, LOCOMO_GIE, 0x00);
+
+ lg->gpio.base = pdata ? pdata->gpio_base : -1;
+ lg->gpio.label = "locomo-gpio";
+ lg->gpio.ngpio = 16;
+ lg->gpio.set = locomo_gpio_set;
+ lg->gpio.get = locomo_gpio_get;
+ lg->gpio.direction_input = locomo_gpio_direction_input;
+ lg->gpio.direction_output = locomo_gpio_direction_output;
+
+ ret = gpiochip_add(&lg->gpio);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int locomo_gpio_remove(struct platform_device *pdev)
+{
+ struct locomo_gpio *lg = platform_get_drvdata(pdev);
+
+ gpiochip_remove(&lg->gpio);
+
+ return 0;
+}
+
+static struct platform_driver locomo_gpio_driver = {
+ .probe = locomo_gpio_probe,
+ .remove = locomo_gpio_remove,
+ .driver = {
+ .name = "locomo-gpio",
+ .pm = LOCOMO_GPIO_PM,
+ },
+};
+module_platform_driver(locomo_gpio_driver);
+
+MODULE_DESCRIPTION("Sharp LoCoMo GPIO driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Lenz <lenz@xxxxxxxxxxx>");
+MODULE_ALIAS("platform:locomo-gpio");
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
