Am 23.05.2015 um 00:58 schrieb Dmitry Torokhov:
> The STMPE MFD is only used with device tree configured systems (and STMPE
> MFD core depends on OF), so force the configuration to come from device
> tree only.
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> ---
>
> Not tested as no device, please give it a spin.
Works fine here with STMPE610 on Adafruit PITFT Plus 3.5" with kernel 3.18.13.
Heiner
>
> drivers/input/touchscreen/Kconfig | 1 +
> drivers/input/touchscreen/stmpe-ts.c | 29 ++++--------------------
> include/linux/mfd/stmpe.h | 44 ------------------------------------
> 3 files changed, 6 insertions(+), 68 deletions(-)
>
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index 80f6386..7afa6a2 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -958,6 +958,7 @@ config TOUCHSCREEN_ST1232
> config TOUCHSCREEN_STMPE
> tristate "STMicroelectronics STMPE touchscreens"
> depends on MFD_STMPE
> + depends on (OF || COMPILE_TEST)
> help
> Say Y here if you want support for STMicroelectronics
> STMPE touchscreen controllers.
> diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c
> index e4977c6..e414d43 100644
> --- a/drivers/input/touchscreen/stmpe-ts.c
> +++ b/drivers/input/touchscreen/stmpe-ts.c
> @@ -267,27 +267,10 @@ static void stmpe_ts_close(struct input_dev *dev)
> static void stmpe_ts_get_platform_info(struct platform_device *pdev,
> struct stmpe_touch *ts)
> {
> - struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
> struct device_node *np = pdev->dev.of_node;
> - struct stmpe_ts_platform_data *ts_pdata = NULL;
> -
> - ts->stmpe = stmpe;
> -
> - if (stmpe->pdata && stmpe->pdata->ts) {
> - ts_pdata = stmpe->pdata->ts;
> -
> - ts->sample_time = ts_pdata->sample_time;
> - ts->mod_12b = ts_pdata->mod_12b;
> - ts->ref_sel = ts_pdata->ref_sel;
> - ts->adc_freq = ts_pdata->adc_freq;
> - ts->ave_ctrl = ts_pdata->ave_ctrl;
> - ts->touch_det_delay = ts_pdata->touch_det_delay;
> - ts->settling = ts_pdata->settling;
> - ts->fraction_z = ts_pdata->fraction_z;
> - ts->i_drive = ts_pdata->i_drive;
> - } else if (np) {
> - u32 val;
> + u32 val;
>
> + if (np) {
> if (!of_property_read_u32(np, "st,sample-time", &val))
> ts->sample_time = val;
> if (!of_property_read_u32(np, "st,mod-12b", &val))
> @@ -311,6 +294,7 @@ static void stmpe_ts_get_platform_info(struct platform_device *pdev,
>
> static int stmpe_input_probe(struct platform_device *pdev)
> {
> + struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
> struct stmpe_touch *ts;
> struct input_dev *idev;
> int error;
> @@ -329,6 +313,7 @@ static int stmpe_input_probe(struct platform_device *pdev)
> return -ENOMEM;
>
> platform_set_drvdata(pdev, ts);
> + ts->stmpe = stmpe;
> ts->idev = idev;
> ts->dev = &pdev->dev;
>
> @@ -351,14 +336,13 @@ static int stmpe_input_probe(struct platform_device *pdev)
> idev->name = STMPE_TS_NAME;
> idev->phys = STMPE_TS_NAME"/input0";
> idev->id.bustype = BUS_I2C;
> - idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
> - idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
>
> idev->open = stmpe_ts_open;
> idev->close = stmpe_ts_close;
>
> input_set_drvdata(idev, ts);
>
> + input_set_capability(idev, EV_KEY, BTN_TOUCH);
> input_set_abs_params(idev, ABS_X, 0, XY_MASK, 0, 0);
> input_set_abs_params(idev, ABS_Y, 0, XY_MASK, 0, 0);
> input_set_abs_params(idev, ABS_PRESSURE, 0x0, 0xff, 0, 0);
> @@ -390,15 +374,12 @@ static struct platform_driver stmpe_ts_driver = {
> };
> module_platform_driver(stmpe_ts_driver);
>
> -#ifdef CONFIG_OF
> static const struct of_device_id stmpe_ts_ids[] = {
> { .compatible = "st,stmpe-ts", },
> { },
> };
> MODULE_DEVICE_TABLE(of, stmpe_ts_ids);
> -#endif
>
> MODULE_AUTHOR("Luotao Fu <l.fu@xxxxxxxxxxxxxx>");
> MODULE_DESCRIPTION("STMPEXXX touchscreen driver");
> MODULE_LICENSE("GPL");
> -MODULE_ALIAS("platform:" STMPE_TS_NAME);
> diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
> index c9d8690..cb83883 100644
> --- a/include/linux/mfd/stmpe.h
> +++ b/include/linux/mfd/stmpe.h
> @@ -118,47 +118,6 @@ extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
> #define STMPE_GPIO_NOREQ_811_TOUCH (0xf0)
>
> /**
> - * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform
> - * data
> - * @sample_time: ADC converstion time in number of clock.
> - * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks,
> - * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks),
> - * recommended is 4.
> - * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
> - * @ref_sel: ADC reference source
> - * (0 -> internal reference, 1 -> external reference)
> - * @adc_freq: ADC Clock speed
> - * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
> - * @ave_ctrl: Sample average control
> - * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples)
> - * @touch_det_delay: Touch detect interrupt delay
> - * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us,
> - * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms)
> - * recommended is 3
> - * @settling: Panel driver settling time
> - * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms,
> - * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms)
> - * recommended is 2
> - * @fraction_z: Length of the fractional part in z
> - * (fraction_z ([0..7]) = Count of the fractional part)
> - * recommended is 7
> - * @i_drive: current limit value of the touchscreen drivers
> - * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max)
> - *
> - * */
> -struct stmpe_ts_platform_data {
> - u8 sample_time;
> - u8 mod_12b;
> - u8 ref_sel;
> - u8 adc_freq;
> - u8 ave_ctrl;
> - u8 touch_det_delay;
> - u8 settling;
> - u8 fraction_z;
> - u8 i_drive;
> -};
> -
> -/**
> * struct stmpe_platform_data - STMPE platform data
> * @id: device id to distinguish between multiple STMPEs on the same board
> * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
> @@ -168,7 +127,6 @@ struct stmpe_ts_platform_data {
> * @irq_over_gpio: true if gpio is used to get irq
> * @irq_gpio: gpio number over which irq will be requested (significant only if
> * irq_over_gpio is true)
> - * @ts: touchscreen-specific platform data
> */
> struct stmpe_platform_data {
> int id;
> @@ -178,8 +136,6 @@ struct stmpe_platform_data {
> bool irq_over_gpio;
> int irq_gpio;
> int autosleep_timeout;
> -
> - struct stmpe_ts_platform_data *ts;
> };
>
> #endif
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
