On 18 April 2015 16:53 Guenter Roeck wrote: Hi Guenter, There were some missing explanations in my previous e-mails for some of your comments. Please find them below. During the da9062_wdt_probe() there were several ignored error paths and a missing cleanup . I intend to rectify this with the following: --- a/linux-next/v4.0/drivers/watchdog/da9062_wdt.c +++ b/linux-next/v4.0/drivers/watchdog/da9062_wdt.c @@ -232,8 +232,11 @@ static int da9062_wdt_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, wdt); irq = platform_get_irq_byname(pdev, "WDG_WARN"); - if (irq < 0) + if (irq < 0) { dev_err(wdt->hw->dev, "Failed to get IRQ.\n"); + ret = irq; + goto error; + } ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, da9062_wdt_wdg_warn_irq_handler, @@ -242,20 +245,23 @@ static int da9062_wdt_probe(struct platform_device *pdev) if (ret) { dev_err(wdt->hw->dev, "Failed to request watchdog device IRQ.\n"); + goto error; } ret = watchdog_register_device(&wdt->wdtdev); - if (ret < 0) + if (ret < 0) { dev_err(wdt->hw->dev, "watchdog registration incomplete (%d)\n", ret); + goto error; + } da9062_set_window_start(wdt); ret = da9062_wdt_ping(&wdt->wdtdev); if (ret < 0) - dev_err(wdt->hw->dev, - "failed to ping the watchdog (%d)\n", ret); + watchdog_unregister_device(&wdt->wdtdev); +error: return ret; } Also there was an explanation required for the confusing ping() function inside the driver probe() ... > > + da9062_wdt_ping(&wdt->wdtdev); [...] > That ping is asking for an explanation. Does it imply that the watchdog is > known to be running and cannot be stopped ? Pinging the DA9062 watchdog has no effect if it is disabled. But I guessed that in a real application if the watchdog -was- enabled from start-up then the first thing the driver needed to do was kick the watchdog. I could have put protection around it, say by reading the TWDSCALE bit for whether the watchdog was enabled, and that would have made it more explicit but in this case it wouldn't matter. This can be removed if you prefer. Regards, Steve -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html