Hello Dmitry,
On 04/08/2015 02:26 AM, Dmitry Torokhov wrote:
> This change allows atmel_mxt_ts to bind to ACPI-enumerated devices in
> Google Pixel 2 (2015).
>
> While newer version of ACPI standard allow use of device-tree-like
> properties in device descriptions, the version of ACPI implemented in
> Google BIOS does not support them, and we have to resort to DMI data to
> specify exact characteristics of the devices (touchpad vs. touchscreen,
> GPIO to button mapping, etc).
>
> Pixel 1 continues to use i2c devices and platform data created by
> chromeos-laptop driver, since ACPI does not enumerate them.
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> ---
> drivers/input/touchscreen/atmel_mxt_ts.c | 149 +++++++++++++++++++++++++++----
> 1 file changed, 134 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
> index 2875ddf..dfc7309 100644
> --- a/drivers/input/touchscreen/atmel_mxt_ts.c
> +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
> @@ -14,6 +14,8 @@
> *
> */
>
> +#include <linux/acpi.h>
> +#include <linux/dmi.h>
> #include <linux/module.h>
> #include <linux/init.h>
> #include <linux/completion.h>
> @@ -724,15 +726,15 @@ static void mxt_input_button(struct mxt_data *data, u8 *message)
> {
> struct input_dev *input = data->input_dev;
> const struct mxt_platform_data *pdata = data->pdata;
> - bool button;
> int i;
>
> - /* Active-low switch */
> for (i = 0; i < pdata->t19_num_keys; i++) {
> if (pdata->t19_keymap[i] == KEY_RESERVED)
> continue;
> - button = !(message[1] & (1 << i));
> - input_report_key(input, pdata->t19_keymap[i], button);
> +
> + /* Active-low switch */
> + input_report_key(input, pdata->t19_keymap[i],
> + !(message[1] & BIT(i)));
This is an unrelated cleanup so probably should had been a separate patch?
> }
> }
>
> @@ -2371,7 +2373,7 @@ static void mxt_input_close(struct input_dev *dev)
> }
>
> #ifdef CONFIG_OF
> -static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
> +static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
> {
> struct mxt_platform_data *pdata;
> u32 *keymap;
> @@ -2379,7 +2381,7 @@ static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
> int proplen, i, ret;
>
> if (!client->dev.of_node)
> - return ERR_PTR(-ENODEV);
> + return ERR_PTR(-ENOENT);
>
> pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
> if (!pdata)
> @@ -2410,25 +2412,132 @@ static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
> return pdata;
> }
> #else
> -static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
> +static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
> {
> - dev_dbg(&client->dev, "No platform data specified\n");
> - return ERR_PTR(-EINVAL);
> + return ERR_PTR(-ENOENT);
> }
> #endif
>
> +#ifdef CONFIG_ACPI
> +
> +struct mxt_acpi_platform_data {
> + const char *hid;
> + struct mxt_platform_data pdata;
> +};
> +
> +static unsigned int samus_touchpad_buttons[] = {
> + KEY_RESERVED,
> + KEY_RESERVED,
> + KEY_RESERVED,
> + BTN_LEFT
> +};
> +
> +static struct mxt_acpi_platform_data samus_platform_data[] = {
> + {
> + /* Touchpad */
> + .hid = "ATML0000",
> + .pdata = {
> + .t19_num_keys = ARRAY_SIZE(samus_touchpad_buttons),
> + .t19_keymap = samus_touchpad_buttons,
> + },
> + },
> + {
> + /* Touchscreen */
> + .hid = "ATML0001",
> + },
> + { }
> +};
> +
> +static const struct dmi_system_id mxt_dmi_table[] = {
> + {
> + /* 2015 Google Pixel */
> + .ident = "Chromebook Pixel 2",
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
> + DMI_MATCH(DMI_PRODUCT_NAME, "Samus"),
> + },
> + .driver_data = samus_platform_data,
> + },
> + { }
> +};
> +
> +static const struct mxt_platform_data *mxt_parse_acpi(struct i2c_client *client)
> +{
> + struct acpi_device *adev;
> + const struct dmi_system_id *system_id;
> + const struct mxt_acpi_platform_data *acpi_pdata;
> +
> + /*
> + * Ignore ACPI devices representing bootloader mode.
> + *
> + * This is a bit of a hack: Google Chromebook BIOS creates ACPI
> + * devices for both application and bootloader modes, but we are
> + * interested in application mode only (if device is in bootloader
> + * mode we'll end up switching into application anyway). So far
> + * application mode addresses were all above 0x40, so we'll use it
> + * as a threshold.
> + */
> + if (client->addr < 0x40)
> + return ERR_PTR(-ENXIO);
> +
> + adev = ACPI_COMPANION(&client->dev);
> + if (!adev)
> + return ERR_PTR(-ENOENT);
> +
> + system_id = dmi_first_match(mxt_dmi_table);
> + if (!system_id)
> + return ERR_PTR(-ENOENT);
> +
> + acpi_pdata = system_id->driver_data;
> + if (!acpi_pdata)
> + return ERR_PTR(-ENOENT);
> +
> + while (acpi_pdata->hid) {
> + if (!strcmp(acpi_device_hid(adev), acpi_pdata->hid))
> + return &acpi_pdata->pdata;
> +
> + acpi_pdata++;
> + }
> +
> + return ERR_PTR(-ENOENT);
> +}
> +#else
> +static const struct mxt_platform_data *mxt_parse_acpi(struct i2c_client *client)
> +{
> + return ERR_PTR(-ENOENT);
> +}
> +#endif
> +
> +static const struct mxt_platform_data *
> +mxt_get_platform_data(struct i2c_client *client)
> +{
> + const struct mxt_platform_data *pdata;
> +
> + pdata = dev_get_platdata(&client->dev);
> + if (pdata)
> + return pdata;
> +
> + pdata = mxt_parse_dt(client);
> + if (!IS_ERR(pdata) || PTR_ERR(pdata) != -ENOENT)
> + return pdata;
> +
> + pdata = mxt_parse_acpi(client);
> + if (!IS_ERR(pdata) || PTR_ERR(pdata) != -ENOENT)
> + return pdata;
> +
> + dev_err(&client->dev, "No platform data specified\n");
> + return ERR_PTR(-EINVAL);
> +}
> +
> static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
> {
> struct mxt_data *data;
> const struct mxt_platform_data *pdata;
> int error;
>
> - pdata = dev_get_platdata(&client->dev);
> - if (!pdata) {
> - pdata = mxt_parse_dt(client);
> - if (IS_ERR(pdata))
> - return PTR_ERR(pdata);
> - }
> + pdata = mxt_get_platform_data(client);
> + if (IS_ERR(pdata))
> + return PTR_ERR(pdata);
>
> data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL);
> if (!data) {
> @@ -2536,6 +2645,15 @@ static const struct of_device_id mxt_of_match[] = {
> };
> MODULE_DEVICE_TABLE(of, mxt_of_match);
>
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id mxt_acpi_id[] = {
> + { "ATML0000", 0 }, /* Touchpad */
> + { "ATML0001", 0 }, /* Touchscreen */
> + { }
> +};
> +MODULE_DEVICE_TABLE(acpi, mxt_acpi_id);
> +#endif
> +
> static const struct i2c_device_id mxt_id[] = {
> { "qt602240_ts", 0 },
> { "atmel_mxt_ts", 0 },
> @@ -2550,6 +2668,7 @@ static struct i2c_driver mxt_driver = {
> .name = "atmel_mxt_ts",
> .owner = THIS_MODULE,
> .of_match_table = of_match_ptr(mxt_of_match),
> + .acpi_match_table = ACPI_PTR(mxt_acpi_id),
> .pm = &mxt_pm_ops,
> },
> .probe = mxt_probe,
>
Patch looks good to me and I've tested it in a Pixel2 Chromebook using
evtest:
Reviewed-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
Tested-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
