Hi Hans, Thank you so much for the review. From: linux-media-owner@xxxxxxxxxxxxxxx [mailto:linux-media- owner@xxxxxxxxxxxxxxx] On Behalf Of Hans Verkuil Sent: Friday, March 20, 2015 7:08 PM > > Hi Kamil, > > Once again thank you for continuing this work! > > I do have some comments, see below. > > On 03/20/2015 05:52 PM, Kamil Debski wrote: > > Add the CEC framework. > > > > Signed-off-by: Hans Verkuil <hansverk@xxxxxxxxx> > > [k.debski@xxxxxxxxxxx: Merged CEC Updates commit by Hans Verkuil] > > [k.debski@xxxxxxxxxxx: Merged Update author commit by Hans Verkuil] > > [k.debski@xxxxxxxxxxx: change kthread handling when setting logical > > address] > > [k.debski@xxxxxxxxxxx: code cleanup and fixes] > > [k.debski@xxxxxxxxxxx: add missing CEC commands to match spec] > > [k.debski@xxxxxxxxxxx: add RC framework support] > > [k.debski@xxxxxxxxxxx: move and edit documentation] > > [k.debski@xxxxxxxxxxx: add vendor id reporting] > > [k.debski@xxxxxxxxxxx: add promiscuous mode] > > [k.debski@xxxxxxxxxxx: add possibility to clear assigned logical > > addresses] > > Signed-off-by: Kamil Debski <k.debski@xxxxxxxxxxx> > > --- > > Documentation/cec.txt | 321 +++++++++++++ > > drivers/media/Kconfig | 6 + > > drivers/media/Makefile | 2 + > > drivers/media/cec.c | 1158 > ++++++++++++++++++++++++++++++++++++++++++++++ > > include/media/cec.h | 137 ++++++ > > include/uapi/linux/cec.h | 283 +++++++++++ > > 6 files changed, 1907 insertions(+) > > create mode 100644 Documentation/cec.txt > > create mode 100644 drivers/media/cec.c > > create mode 100644 include/media/cec.h > > create mode 100644 include/uapi/linux/cec.h > > > > diff --git a/Documentation/cec.txt b/Documentation/cec.txt > > new file mode 100644 > > index 0000000..e96fcc0 > > --- /dev/null > > +++ b/Documentation/cec.txt > > @@ -0,0 +1,321 @@ > > +CEC Kernel Support > > +================== > > + > > +The CEC framework provides a unified kernel interface for use with > HDMI CEC > > +hardware. It is designed to handle a multiple variants of hardware. > Adding to > > +the flexibility of the framework it enables to set which parts of > the CEC > > +protocol processing is handled by the hardware, by the driver and by > the > > +userspace application. > > + > > + > > +The CEC Protocol > > +---------------- > > + > > +The CEC protocol enables cosumer electronic devices to communicate > with each > > cosumer -> consumer > > > +other through the HDMI connection. The protocol uses logical > addresses in the > > +communication. The logical address is strictly connected with the > functionality > > +provided by the device. The TV acting as the communication hub is > always > > +assigned address 0. The physicall addressis determined by physical > connection > > 'physicall addressis' -> 'physical address is' > s/by/by the/ > > > +between devices. > > + > > +The protocol enables control of compatible devices with a single > remote. > > +Synchronous power on/standby, instant playback with changing the > content source > > +on the TV. > > + > > +The Kernel Interface > > +==================== > > + > > +CEC Adaptor > > s/Adaptor/Adapter/ > > > +----------- > > + > > +#define CEC_LOG_ADDR_INVALID 0xff > > + > > +/* The maximum number of logical addresses one device can be > assigned to. > > + * The CEC 2.0 spec allows for only 2 logical addresses at the > moment. The > > + * Analog Devices CEC hardware supports 3. So let's go wild and go > for 4. */ > > +#define CEC_MAX_LOG_ADDRS 4 > > + > > +/* The "Primary Device Type" */ > > +#define CEC_PRIM_DEVTYPE_TV 0 > > +#define CEC_PRIM_DEVTYPE_RECORD 1 > > +#define CEC_PRIM_DEVTYPE_TUNER 3 > > +#define CEC_PRIM_DEVTYPE_PLAYBACK 4 > > +#define CEC_PRIM_DEVTYPE_AUDIOSYSTEM 5 > > +#define CEC_PRIM_DEVTYPE_SWITCH 6 > > +#define CEC_PRIM_DEVTYPE_VIDEOPROC 7 > > + > > +/* The "All Device Types" flags (CEC 2.0) */ > > +#define CEC_FL_ALL_DEVTYPE_TV (1 << 7) > > +#define CEC_FL_ALL_DEVTYPE_RECORD (1 << 6) > > +#define CEC_FL_ALL_DEVTYPE_TUNER (1 << 5) > > +#define CEC_FL_ALL_DEVTYPE_PLAYBACK (1 << 4) > > +#define CEC_FL_ALL_DEVTYPE_AUDIOSYSTEM (1 << 3) > > +#define CEC_FL_ALL_DEVTYPE_SWITCH (1 << 2) > > +/* And if you wondering what happened to VIDEOPROC devices: those > should > > + * be mapped to a SWITCH. */ > > + > > +/* The logical address types that the CEC device wants to claim */ > > +#define CEC_LOG_ADDR_TYPE_TV 0 > > +#define CEC_LOG_ADDR_TYPE_RECORD 1 > > +#define CEC_LOG_ADDR_TYPE_TUNER 2 > > +#define CEC_LOG_ADDR_TYPE_PLAYBACK 3 > > +#define CEC_LOG_ADDR_TYPE_AUDIOSYSTEM 4 > > +#define CEC_LOG_ADDR_TYPE_SPECIFIC 5 > > +#define CEC_LOG_ADDR_TYPE_UNREGISTERED 6 > > +/* Switches should use UNREGISTERED. > > + * Video processors should use SPECIFIC. */ > > + > > +/* The CEC version */ > > +#define CEC_VERSION_1_4B 5 > > +#define CEC_VERSION_2_0 6 > > + > > +struct cec_adapter { > > + /* internal fields removed */ > > + > > + u16 phys_addr; > > + u32 capabilities; > > + u8 version; > > + u8 num_log_addrs; > > + u8 prim_device[CEC_MAX_LOG_ADDRS]; > > + u8 log_addr_type[CEC_MAX_LOG_ADDRS]; > > + u8 log_addr[CEC_MAX_LOG_ADDRS]; > > + > > + int (*adap_enable)(struct cec_adapter *adap, bool enable); > > + int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr); > > + int (*adap_transmit)(struct cec_adapter *adap, struct cec_msg > *msg); > > + void (*adap_transmit_timed_out)(struct cec_adapter *adap); > > + > > + int (*received_tv)(struct cec_adapter *adap, struct cec_msg *msg); > > + int (*received_record)(struct cec_adapter *adap, struct cec_msg > *msg); > > + int (*received_tuner)(struct cec_adapter *adap, struct cec_msg > *msg); > > + int (*received_playback)(struct cec_adapter *adap, struct cec_msg > *msg); > > + int (*received_audiosystem)(struct cec_adapter *adap, struct > cec_msg *msg); > > + int (*received_switch)(struct cec_adapter *adap, struct cec_msg > *msg); > > + int (*received_videoproc)(struct cec_adapter *adap, struct > cec_msg *msg); > > These are not in the actual header! My bad, I think it must have been a leftover from the previous version of the documentation. > Also, claimed_log_addr() is missing here. > > + int (*received)(struct cec_adapter *adap, struct cec_msg *msg); > > +}; > > + > > +int cec_create_adapter(struct cec_adapter *adap, u32 caps); > > +void cec_delete_adapter(struct cec_adapter *adap); > > +int cec_transmit_msg(struct cec_adapter *adap, struct cec_data *data, > bool block); > > + > > +/* Called by the adapter */ > > +void cec_adap_transmit_done(struct cec_adapter *adap, u32 status); > > +void cec_adap_received_msg(struct cec_adapter *adap, struct cec_msg > *msg); > > + > > + > > +The device type defines are defined by the CEC standard. > > + > > +The cec_adapter structure represents the adapter. It has a number of > > +operations that have to be implemented in the driver: adap_enable() > enables > > +or disables the physical adapter, adap_log_addr() tells the driver > which > > +logical address should be configured. This may be called multiple > times > > +to configure multiple logical addresses. Calling adap_enable(false) > or > > +adap_log_addr(CEC_LOG_ADDR_INVALID) will clear all configured > logical > > +addresses. > > + > > +The adap_transmit op will setup the hardware to send out the given > CEC message. > > +This will return without waiting for the transmission to finish. The > > +adap_transmit_timed_out() function is called when the current > transmission timed > > +out and the hardware needs to be informed of this (the hardware > should go back > > +from transmitter to receiver mode). > > + > > +The adapter driver will also call into the adapter: it should call > > +cec_transmit_done() when a cec transfer was finalized and > cec_received_msg() > > +when a new message was received. > > + > > +When a message is received the corresponding received() op is called > depending > > +on the logical address it is received on. If the message is not > handled by > > +that the received op is called as fallback. The driver can hook into > these ops > > +and do whatever it needs to do in order to respond to the message. > > + > > +The driver has to call cec_create_adapter to initialize the > structure. If > > +the 'caps' argument is non-zero, then it will also create a > /dev/cecX > > +device node to allow userspace to interact with the CEC device. > Userspace > > +can request those capabilities with the CEC_G_CAPS ioctl. > > + > > +In order for a CEC adapter to be configured it needs a physical > address. > > +This is normally assigned by the driver. It is either 0.0.0.0 for a > TV (aka > > +video receiver) or it is derived from the EDID that the source > received > > +from the sink. This is normally set by the driver before enabling > the CEC > > +adapter, or it is set from userspace in the case of CEC USB dongles > (although > > +embedded systems might also want to set this manually). > > I would actually expect that USB dongles read out the EDID from the > source. > I might be wrong, though. EDID is communicated to the device by the TV on a different bus than CEC, it is DDC. It is possible that the dongle also reads DDC messages. My initial understanding was that a CEC USB dongle handles only CEC messages and is passing through all other signals, such as DDC. > > + > > +After enabling the CEC adapter it has to be configured. The CEC > adapter has > > +to be informed for which CEC device types a logical address has to > be found. > > I would say: 'a free (unused) logical address'. > > > +The CEC framework will attempt to find such logical addresses. If > none are > > And here: 'find and claim' > > > +found, then it will fall back to logical address Unregistered (15). > > You probably need to add some documentation regarding > cec_claim_log_addrs() > and how drivers can use it. Also, while logical addresses are being > claimed, > are drivers or userspace allowed to transmit/receive other messages? Or > just > stall until this is finished? When sending a message the user space is free to set any source and destination address. Hence, I see no need to wait until the logical address is claimed. If the user space is not waiting until the address and is sending messages, then I guess it is done with full responsibility on the user space. Regarding receiving, I guess it should be possible to receive broadcast messages. What do you think? > > > + > > +When a CEC message is received the CEC framework will take care of > the CEC > > +core messages CEC_OP_GET_CEC_VERSION, CEC_OP_GIVE_PHYS_ADDR and > CEC_OP_ABORT. > > +Then it will call the received() op (if set), and finally it will > queue it > > +for handling by userspace if create_devnode was true, or send back > > +FEATURE_ABORT if create_devnode was false. > > + > > +Drivers can also use the cec_transmit_msg() call to transmit a > message. This > > +can either be fire-and-forget (the CEC framework will queue up > messages in a > > +transmit queue), or a blocking wait until there is either an error > or a > > +reply to the message. > > + > > + > > +The Userspace API > > +================= > > + > > +CEC communication > > +----------------- > > + > > +This is the main message struct: > > + > > +struct cec_msg { > > + __u32 len; > > + __u8 msg[16]; > > + __u32 status; > > + /* If non-zero, then wait for a reply with this opcode. > > + If there was an error when sending the msg or FeatureAbort > > + was returned, then reply is set to 0. > > + If reply is non-zero upon return, then len/msg are set to > > + the received message. > > + If reply is zero upon return and status has the > CEC_TX_STATUS_FEATURE_ABORT > > + bit set, then len/msg are set to the received feature abort > message. > > + If reply is zero upon return and status has the > CEC_TX_STATUS_REPLY_TIMEOUT > > + bit set, then no reply was seen at all. > > + This field is ignored with CEC_RECEIVE. > > + If reply is non-zero for CEC_TRANSMIT and the message is a > broadcast, > > + then -EINVAL is returned. > > + if reply is non-zero, then timeout is set to 1000 (the > required maximum > > + response time). > > + */ > > + __u8 reply; > > + /* timeout (in ms) is used to timeout CEC_RECEIVE. > > + Set to 0 if you want to wait forever. */ > > + __u32 timeout; > > + struct timespec ts; > > +}; > > + > > +16 bytes for the message, the length of the message, a status value > > +in case of errors. Optionally you can request the CEC framework to > > +wait after transmitting the message until the 'reply' message is > > +returned (or Feature Abort). This is done asynchronously, i.e. it > > +does not require that the reply comes right after the transmit, but > > +other messages in between are allowed. > > + > > +#define CEC_TRANSMIT _IOWR('a', 1, struct cec_msg) > > +#define CEC_RECEIVE _IOWR('a', 2, struct cec_msg) > > + > > +With CEC_TRANSMIT you can transmit a message, either blocking or > > +non-blocking. With CEC_RECEIVE you can dequeue a pending received > > +message from the internal queue or wait for a message to arrive > > +(if called in blocking mode). > > + > > + > > +/* Userspace has to configure the adapter state (enable/disable) */ > > +#define CEC_CAP_STATE (1 << 0) > > +/* Userspace has to configure the physical address */ > > +#define CEC_CAP_PHYS_ADDR (1 << 1) > > +/* Userspace has to configure the logical addresses */ > > +#define CEC_CAP_LOG_ADDRS (1 << 2) > > +/* Userspace can transmit messages */ > > +#define CEC_CAP_TRANSMIT (1 << 3) > > +/* Userspace can receive messages */ > > +#define CEC_CAP_RECEIVE (1 << 4) > > + > > +struct cec_caps { > > + __u32 available_log_addrs; > > + __u32 capabilities; > > +}; > > + > > +#define CEC_G_CAPS _IOR('a', 0, struct cec_caps) > > + > > +Obtain some of the CEC adapter capabilities: the number of logical > addresses > > +that the adapter can configure and what can be controlled from > userspace. > > + > > +/* > > + Enable/disable the adapter. The S_ADAP_STATE ioctl is not > available > > + unless CEC_CAP_STATE is set. > > + */ > > +#define CEC_G_ADAP_STATE _IOR('a', 5, __u32) > > +#define CEC_S_ADAP_STATE _IOW('a', 6, __u32) > > + > > +/* > > + phys_addr is either 0 (if this is the CEC root device) > > + or a valid physical address obtained from the sink's EDID > > + as read by this CEC device (if this is a source device) > > + or a physical address obtained and modified from a sink > > + EDID and used for a sink CEC device. > > + If nothing is connected, then phys_addr is 0xffff. > > + See HDMI 1.4b, section 8.7 (Physical Address). > > + > > + The S_ADAP_PHYS_ADDR ioctl is not available unless > CEC_CAP_PHYS_ADDR > > + is set. > > + */ > > +#define CEC_G_ADAP_PHYS_ADDR _IOR('a', 7, __u16) > > +#define CEC_S_ADAP_PHYS_ADDR _IOW('a', 8, __u16) > > + > > +struct cec_log_addrs { > > + __u8 cec_version; > > + __u8 num_log_addrs; > > + __u8 primary_device_type[CEC_MAX_LOG_ADDRS]; > > + __u8 log_addr_type[CEC_MAX_LOG_ADDRS]; > > + __u8 log_addr[CEC_MAX_LOG_ADDRS]; > > + > > + /* CEC 2.0 */ > > + __u8 all_device_types; > > + __u8 features[CEC_MAX_LOG_ADDRS][12]; > > +}; > > + > > +/* > > + Configure the CEC adapter. > > + > > + The cec_version determines which CEC version should be followed. > > + > > + It will try to claim num_log_addrs devices. The log_addr_type > array has > > + the logical address type that needs to be claimed for that device, > and > > + the log_addr array will receive the actual logical address that > was > > + claimed for that device or 0xff if no address could be claimed. > > + > > + The primary_device_type contains the primary device for each > logical > > + address. > > + > > + For CEC 2.0 devices the all_device_types parameter to use with > the > > For CEC 2.0 devices fill in the .... > > > + Report Features command, and 'features' contains the remaining > parameters > > ..., and fill in the 'features' which contains.... > > > + (RC Profile and Device Features) to use in Report Features. > > + > > + An error is returned if the adapter is disabled or if there > > + is no physical address assigned or if cec_version is unknown. > > s/if/if the/ > > > + > > + If no logical address of one or more of the given types could be > claimed, > > + then log_addr will be set to CEC_LOG_ADDR_INVALID. > > + > > + If no logical address could be claimed at all, then num_log_addrs > will > > + be set to 1, log_addr_type[0] to UNREGISTERED and log_addr[0] to > 0xf. > > + > > + The S_ADAP_LOG_ADDRS ioctl is not available unless > CEC_CAP_LOG_ADDRS > > + is set. > > + */ > > +#define CEC_G_ADAP_LOG_ADDRS _IOR('a', 3, struct cec_log_addrs) > > +#define CEC_S_ADAP_LOG_ADDRS _IOWR('a', 4, struct cec_log_addrs) > > + > > +The event ioctl is used to get a single struct cec_event if it was > > +previously posted by the driver by the cec_post_event function. > > + > > +#define CEC_G_EVENT _IOWR('a', 9, struct cec_event) > > This needs better documentation. The cec_post_event() function isn't > described either. Did I ever do something with this? I have a suspicion > that this can be removed altogether. > > Note that VENDOR_ID documentation is missing. > > > + > > +Promiscuous mode > > +---------------- > > + > > +The promiscuous mode enables the userspace applications to read all > > +messages on the CEC bus. This is similar to the promiscuous mode in > > +network devices. In the normal mode messages not directed to the > device > > +(differentiated by the logical address of the CEC device) are not > > +forwarded to the userspace. Same rule applies to the messages > contailning > > +remote control key codes. When promiscuous mode is enabled all > messages > > +can be read by userspace. Processing of the messages is still done, > thus > > +key codes will be both interpreted by the framework and available as > an > > +input device, but also raw messages containing these codes are sent > to > > +the userspace. > > Will messages that are processed by the driver or cec framework also be > relayed to userspace in promiscuous mode? Will userspace be able to > tell > that it has been processed already? All messages will be relayed to the user space and no there is no possibility to check whether the message was processed by the kernel already. > > > + > > +Switching on the promiscuous mode is done with a special ioctl. > > + > > +#define CEC_G_PROMISCUOUS _IOR('a', 12, int) > > +#define CEC_S_PROMISCUOUS _IOW('a', 13, int) > > + > > diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig > > index 3ef0f90..262e9ad 100644 > > --- a/drivers/media/Kconfig > > +++ b/drivers/media/Kconfig > > @@ -15,6 +15,12 @@ if MEDIA_SUPPORT > > > > comment "Multimedia core support" > > > > +config CEC > > + tristate "CEC API (EXPERIMENTAL)" > > + select RC_CORE > > + ---help--- > > + Enable the CEC API. > > + > > # > > # Multimedia support - automatically enable V4L2 and DVB core > > # > > diff --git a/drivers/media/Makefile b/drivers/media/Makefile > > index e608bbc..db66014 100644 > > --- a/drivers/media/Makefile > > +++ b/drivers/media/Makefile > > @@ -2,6 +2,8 @@ > > # Makefile for the kernel multimedia device drivers. > > # > > > > +obj-$(CONFIG_CEC) += cec.o > > + > > media-objs := media-device.o media-devnode.o media-entity.o > > > > # > > diff --git a/drivers/media/cec.c b/drivers/media/cec.c > > new file mode 100644 > > index 0000000..929f198 > > --- /dev/null > > +++ b/drivers/media/cec.c > > @@ -0,0 +1,1158 @@ > > +#include <linux/errno.h> > > +#include <linux/init.h> > > +#include <linux/module.h> > > +#include <linux/kernel.h> > > +#include <linux/kmod.h> > > +#include <linux/slab.h> > > +#include <linux/mm.h> > > +#include <linux/string.h> > > +#include <linux/types.h> > > +#include <linux/uaccess.h> > > +#include <media/cec.h> > > + > > +#define CEC_NUM_DEVICES 256 > > +#define CEC_NAME "cec" > > + > > +static int debug; > > +module_param(debug, int, 0644); > > +MODULE_PARM_DESC(debug, "debug level (0-1)"); > > + > > +struct cec_transmit_notifier { > > + struct completion c; > > + struct cec_data *data; > > +}; > > + > > +#define dprintk(fmt, arg...) \ > > + do { \ > > + if (debug) \ > > + pr_info("cec-%s: " fmt, adap->name , ## arg); \ > > + } while(0) > > + > > +static dev_t cec_dev_t; > > + > > +/* Active devices */ > > +static DEFINE_MUTEX(cec_devnode_lock); > > +static DECLARE_BITMAP(cec_devnode_nums, CEC_NUM_DEVICES); > > + > > +/* dev to cec_devnode */ > > +#define to_cec_devnode(cd) container_of(cd, struct cec_devnode, dev) > > + > > +static inline struct cec_devnode *cec_devnode_data(struct file *filp) > > +{ > > + return filp->private_data; > > +} > > + > > +static int cec_log_addr2idx(const struct cec_adapter *adap, u8 > log_addr) > > +{ > > + int i; > > + > > + for (i = 0; i < adap->num_log_addrs; i++) > > + if (adap->log_addr[i] == log_addr) > > + return i; > > + return -1; > > +} > > + > > +static unsigned cec_log_addr2dev(const struct cec_adapter *adap, u8 > log_addr) > > +{ > > + int i = cec_log_addr2idx(adap, log_addr); > > + > > + return adap->prim_device[i < 0 ? 0 : i]; > > +} > > + > > +/* Called when the last user of the cec device exits. */ > > +static void cec_devnode_release(struct device *cd) > > +{ > > + struct cec_devnode *cecdev = to_cec_devnode(cd); > > + > > + mutex_lock(&cec_devnode_lock); > > + > > + /* Delete the cdev on this minor as well */ > > + cdev_del(&cecdev->cdev); > > + > > + /* Mark device node number as free */ > > + clear_bit(cecdev->minor, cec_devnode_nums); > > + > > + mutex_unlock(&cec_devnode_lock); > > + > > + /* Release cec_devnode and perform other cleanups as needed. */ > > + if (cecdev->release) > > + cecdev->release(cecdev); > > +} > > + > > +static struct bus_type cec_bus_type = { > > + .name = CEC_NAME, > > +}; > > + > > +static bool cec_sleep(struct cec_adapter *adap, int timeout) > > +{ > > + bool timed_out = false; > > + > > + DECLARE_WAITQUEUE(wait, current); > > + > > + add_wait_queue(&adap->kthread_waitq, &wait); > > + if (!kthread_should_stop()) { > > + if (timeout < 0) { > > + set_current_state(TASK_INTERRUPTIBLE); > > + schedule(); > > + } else { > > + timed_out = !schedule_timeout_interruptible > > + (msecs_to_jiffies(timeout)); > > + } > > + } > > + > > + remove_wait_queue(&adap->kthread_waitq, &wait); > > + return timed_out; > > +} > > + > > +/* > > + * Main CEC state machine > > + * > > + * In the IDLE state the CEC adapter is ready to receive or transmit > messages. > > + * If it is woken up it will check if a new message is queued, and > if so it > > + * will be transmitted and the state will go to TRANSMITTING. > > + * > > + * When the transmit is marked as done the state machine will check > if it > > + * should wait for a reply. If not, it will call the notifier and go > back > > + * to the IDLE state. Else it will switch to the WAIT state and wait > for a > > + * reply. When the reply arrives it will call the notifier and go > back > > + * to IDLE state. > > + * > > + * For the transmit and the wait-for-reply states a timeout is used > of > > + * 1 second as per the standard. > > + */ > > +static int cec_thread_func(void *data) > > +{ > > + struct cec_adapter *adap = data; > > + int timeout = -1; > > + > > + for (;;) { > > + bool timed_out = cec_sleep(adap, timeout); > > + > > + if (kthread_should_stop()) > > + break; > > + timeout = -1; > > + mutex_lock(&adap->lock); > > + dprintk("state %d timedout: %d tx: %d@%d\n", adap->state, > > + timed_out, adap->tx_qcount, adap->tx_qstart); > > + if (adap->state == CEC_ADAP_STATE_TRANSMITTING && timed_out) > > + adap->adap_transmit_timed_out(adap); > > + > > + if (adap->state == CEC_ADAP_STATE_WAIT || > > + adap->state == CEC_ADAP_STATE_TRANSMITTING) { > > + struct cec_data *data = adap->tx_queue + adap- > >tx_qstart; > > + > > + if (adap->state == CEC_ADAP_STATE_TRANSMITTING && > > + data->msg.reply && !timed_out && > > + data->msg.status == CEC_TX_STATUS_OK) { > > + adap->state = CEC_ADAP_STATE_WAIT; > > + timeout = 1000; > > + } else { > > + if (timed_out) { > > + data->msg.reply = 0; > > + if (adap->state == > CEC_ADAP_STATE_TRANSMITTING) > > + data->msg.status = > CEC_TX_STATUS_RETRY_TIMEOUT; > > + else > > + data->msg.status = > CEC_TX_STATUS_REPLY_TIMEOUT; > > + } > > + adap->state = CEC_ADAP_STATE_IDLE; > > + if (data->func) { > > + mutex_unlock(&adap->lock); > > + data->func(adap, data, data->priv); > > + mutex_lock(&adap->lock); > > + } > > + adap->tx_qstart = (adap->tx_qstart + 1) % > CEC_TX_QUEUE_SZ; > > + adap->tx_qcount--; > > + wake_up_interruptible(&adap->waitq); > > + } > > + } > > + if (adap->state == CEC_ADAP_STATE_IDLE && adap->tx_qcount) > { > > + adap->state = CEC_ADAP_STATE_TRANSMITTING; > > + timeout = adap->tx_queue[adap->tx_qstart].msg.len == > 1 ? 200 : 1000; > > + adap->adap_transmit(adap, &adap->tx_queue[adap- > >tx_qstart].msg); > > + mutex_unlock(&adap->lock); > > + continue; > > + } > > + mutex_unlock(&adap->lock); > > + } > > + return 0; > > +} > > + > > +static int cec_transmit_notify(struct cec_adapter *adap, struct > cec_data *data, > > + void *priv) > > +{ > > + struct cec_transmit_notifier *n = priv; > > + > > + *(n->data) = *data; > > + complete(&n->c); > > + return 0; > > +} > > + > > +int cec_transmit_msg(struct cec_adapter *adap, struct cec_data *data, > bool block) > > +{ > > + struct cec_transmit_notifier notifier; > > + struct cec_msg *msg = &data->msg; > > + int res = 0; > > + unsigned idx; > > + > > + if (msg->len == 0 || msg->len > 16) > > + return -EINVAL; > > + if (msg->reply && (msg->len == 1 || cec_msg_is_broadcast(msg))) > > + return -EINVAL; > > + if (msg->len > 1 && !cec_msg_is_broadcast(msg) && > > + cec_msg_initiator(msg) == cec_msg_destination(msg)) > > + return -EINVAL; > > + if (cec_msg_initiator(msg) != 0xf && > > + cec_log_addr2idx(adap, cec_msg_initiator(msg)) < 0) > > + return -EINVAL; > > + > > + if (msg->len == 1) > > + dprintk("cec_transmit_msg: 0x%02x%s\n", > > + msg->msg[0], !block ? " nb" : ""); > > + else if (msg->reply) > > + dprintk("cec_transmit_msg: 0x%02x 0x%02x (wait for > 0x%02x)%s\n", > > + msg->msg[0], msg->msg[1], > > + msg->reply, !block ? " nb" : ""); > > + else > > + dprintk("cec_transmit_msg: 0x%02x 0x%02x%s\n", > > + msg->msg[0], msg->msg[1], > > + !block ? " nb" : ""); > > + > > + msg->status = 0; > > + memset(&msg->ts, 0, sizeof(msg->ts)); > > + if (msg->reply) > > + msg->timeout = 1000; > > + if (block) { > > + init_completion(¬ifier.c); > > + notifier.data = data; > > + data->func = cec_transmit_notify; > > + data->priv = ¬ifier; > > + } else { > > + data->func = NULL; > > + data->priv = NULL; > > + } > > + mutex_lock(&adap->lock); > > + idx = (adap->tx_qstart + adap->tx_qcount) % CEC_TX_QUEUE_SZ; > > + if (adap->tx_qcount == CEC_TX_QUEUE_SZ) { > > + res = -EBUSY; > > + } else { > > + adap->tx_queue[idx] = *data; > > + adap->tx_qcount++; > > + if (adap->state == CEC_ADAP_STATE_IDLE) > > + wake_up_interruptible(&adap->kthread_waitq); > > + } > > + mutex_unlock(&adap->lock); > > + if (res || !block) > > + return res; > > + wait_for_completion_interruptible(¬ifier.c); > > + return res; > > +} > > +EXPORT_SYMBOL_GPL(cec_transmit_msg); > > + > > +void cec_transmit_done(struct cec_adapter *adap, u32 status) > > +{ > > + struct cec_msg *msg; > > + > > + dprintk("cec_transmit_done\n"); > > + mutex_lock(&adap->lock); > > + if (adap->state == CEC_ADAP_STATE_TRANSMITTING) { > > + msg = &adap->tx_queue[adap->tx_qstart].msg; > > + msg->status = status; > > + if (status) > > + msg->reply = 0; > > + ktime_get_ts(&msg->ts); > > + wake_up_interruptible(&adap->kthread_waitq); > > + } > > + mutex_unlock(&adap->lock); > > +} > > +EXPORT_SYMBOL_GPL(cec_transmit_done); > > + > > +static int cec_receive_notify(struct cec_adapter *adap, struct > cec_msg *msg) > > +{ > > + bool is_broadcast = cec_msg_is_broadcast(msg); > > + bool promiscuous = adap->promiscuous; > > + u8 dest_laddr = cec_msg_destination(msg); > > + u8 devtype = cec_log_addr2dev(adap, dest_laddr); > > + bool is_directed = cec_log_addr2idx(adap, dest_laddr) >= 0; > > + struct cec_data tx_data; > > + int res = 0; > > + unsigned idx; > > + > > + if (msg->len <= 1) > > + return 0; > > + if (!is_directed && !is_broadcast) { > > + if (promiscuous) { > > + goto pass_message; > > + } else { > > + return 0; /* Not for us */ > > + } > > Just do: > > if (promiscuous) > goto pass_message; > return 0; > > No need for the 'else' keyword. > > Same elsewhere. > > > + } > > + > > + tx_data.msg.msg[0] = (msg->msg[0] << 4) | (msg->msg[0] >> 4); > > + tx_data.msg.reply = 0; > > + > > + if (adap->received) { > > + res = adap->received(adap, msg); > > + if (res != -ENOMSG) > > + return 0; > > + res = 0; > > + } > > + > > + switch (msg->msg[1]) { > > + case CEC_OP_GET_CEC_VERSION: > > + if (is_broadcast) { > > + if (promiscuous) > > + goto pass_message; > > + else > > + return 0; > > + } > > + tx_data.msg.len = 3; > > + tx_data.msg.msg[1] = CEC_OP_CEC_VERSION; > > + tx_data.msg.msg[2] = adap->version; > > + res = cec_transmit_msg(adap, &tx_data, false); > > + if (promiscuous) > > + break; > > + return res; > > + > > + case CEC_OP_GIVE_PHYSICAL_ADDR: > > + if (!is_directed) { > > + if (promiscuous) > > + goto pass_message; > > + else > > + return 0; > > + } > > + /* Do nothing for CEC switches using addr 15 */ > > + if (devtype == CEC_PRIM_DEVTYPE_SWITCH && dest_laddr == 15) > { > > + if (promiscuous) > > + goto pass_message; > > + else > > + return 0; > > + } > > + tx_data.msg.len = 5; > > + tx_data.msg.msg[1] = CEC_OP_REPORT_PHYSICAL_ADDR; > > + tx_data.msg.msg[2] = adap->phys_addr >> 8; > > + tx_data.msg.msg[3] = adap->phys_addr & 0xff; > > + tx_data.msg.msg[4] = devtype; > > + res = cec_transmit_msg(adap, &tx_data, false); > > + if (promiscuous) > > + break; > > + return res; > > + > > + case CEC_OP_ABORT: > > + /* Do nothing for CEC switches */ > > + if (devtype == CEC_PRIM_DEVTYPE_SWITCH) { > > + if (promiscuous) > > + goto pass_message; > > + else > > + return 0; > > + } > > + tx_data.msg.len = 4; > > + tx_data.msg.msg[1] = CEC_OP_FEATURE_ABORT; > > + tx_data.msg.msg[2] = msg->msg[1]; > > + tx_data.msg.msg[3] = 4; /* Refused */ > > + res = cec_transmit_msg(adap, &tx_data, false); > > + if (promiscuous) > > + break; > > + return res; > > + > > + case CEC_OP_USER_CONTROL_PRESSED: > > + switch (msg->msg[2]) { > > + case 0x60: > > + if (msg->len == 3) > > + rc_keydown(adap->rc, RC_TYPE_CEC, > > + msg->msg[2] << 8 | msg->msg[3], 0); > > + else > > + rc_keydown(adap->rc, RC_TYPE_CEC,msg->msg[2], > > space after , > > > + 0); > > + if (!promiscuous) > > + return 0; > > + break; > > + case 0x67: case 0x68: case 0x69: case 0x6a: > > A comment would be useful here. > > > + break; > > + default: > > + rc_keydown(adap->rc, RC_TYPE_CEC, msg->msg[2], 0); > > + if (!promiscuous) > > + return 0; > > + } > > + > > + case CEC_OP_USER_CONTROL_RELEASED: > > + rc_keyup(adap->rc); > > + if (!promiscuous) > > + return 0; > > + } > > + > > +pass_message: > > + if ((adap->capabilities & CEC_CAP_RECEIVE) == 0) > > + return 0; > > + mutex_lock(&adap->lock); > > + idx = (adap->rx_qstart + adap->rx_qcount) % CEC_RX_QUEUE_SZ; > > + if (adap->rx_qcount == CEC_RX_QUEUE_SZ) { > > + res = -EBUSY; > > + } else { > > + adap->rx_queue[idx] = *msg; > > + adap->rx_qcount++; > > + wake_up_interruptible(&adap->waitq); > > + } > > + mutex_unlock(&adap->lock); > > + return res; > > +} > > + > > +int cec_receive_msg(struct cec_adapter *adap, struct cec_msg *msg, > bool block) > > +{ > > + int res; > > + > > + do { > > + mutex_lock(&adap->lock); > > + if (adap->rx_qcount) { > > + *msg = adap->rx_queue[adap->rx_qstart]; > > + adap->rx_qstart = (adap->rx_qstart + 1) % > CEC_RX_QUEUE_SZ; > > + adap->rx_qcount--; > > + res = 0; > > + } else { > > + res = -EAGAIN; > > + } > > + mutex_unlock(&adap->lock); > > + if (!block || !res) > > + break; > > + if (msg->timeout) { > > + res = wait_event_interruptible_timeout(adap->waitq, > > + adap->rx_qcount, msecs_to_jiffies(msg- > >timeout)); > > + if (res == 0) > > + res = -ETIMEDOUT; > > + else if (res > 0) > > + res = 0; > > + } else { > > + res = wait_event_interruptible(adap->waitq, > > + adap->rx_qcount); > > + } > > + } while (!res); > > + return res; > > +} > > +EXPORT_SYMBOL_GPL(cec_receive_msg); > > + > > +void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg) > > +{ > > + bool is_reply = false; > > + > > + mutex_lock(&adap->lock); > > + ktime_get_ts(&msg->ts); > > + dprintk("cec_received_msg: %02x %02x\n", msg->msg[0], msg- > >msg[1]); > > + if (!cec_msg_is_broadcast(msg) && msg->len > 1 && > > + adap->state == CEC_ADAP_STATE_WAIT) { > > + struct cec_msg *dst = &adap->tx_queue[adap->tx_qstart].msg; > > + > > + if (msg->msg[1] == dst->reply || > > + msg->msg[1] == CEC_OP_FEATURE_ABORT) { > > + *dst = *msg; > > + is_reply = true; > > + if (msg->msg[1] == CEC_OP_FEATURE_ABORT) { > > + dst->reply = 0; > > + dst->status = CEC_TX_STATUS_FEATURE_ABORT; > > + } > > + wake_up_interruptible(&adap->kthread_waitq); > > + } > > + } > > + mutex_unlock(&adap->lock); > > + if (!is_reply) > > + adap->recv_notifier(adap, msg); > > +} > > +EXPORT_SYMBOL_GPL(cec_received_msg); > > + > > +void cec_post_event(struct cec_adapter *adap, u32 event) > > +{ > > + unsigned idx; > > + > > + mutex_lock(&adap->lock); > > + if (adap->ev_qcount == CEC_EV_QUEUE_SZ) { > > + /* Drop oldest event */ > > + adap->ev_qstart = (adap->ev_qstart + 1) % CEC_EV_QUEUE_SZ; > > + adap->ev_qcount--; > > + } > > + > > + idx = (adap->ev_qstart + adap->ev_qcount) % CEC_EV_QUEUE_SZ; > > + > > + adap->ev_queue[idx].event = event; > > + ktime_get_ts(&adap->ev_queue[idx].ts); > > + adap->ev_qcount++; > > + mutex_unlock(&adap->lock); > > +} > > +EXPORT_SYMBOL_GPL(cec_post_event); > > As mentioned, I think that this function and associated data structures > can probably be removed. > > > + > > +static int cec_report_phys_addr(struct cec_adapter *adap, unsigned > logical_addr) > > +{ > > + struct cec_data data; > > + > > + /* Report Physical Address */ > > + data.msg.len = 5; > > + data.msg.msg[0] = (logical_addr << 4) | 0x0f; > > + data.msg.msg[1] = CEC_OP_REPORT_PHYSICAL_ADDR; > > + data.msg.msg[2] = adap->phys_addr >> 8; > > + data.msg.msg[3] = adap->phys_addr & 0xff; > > + data.msg.msg[4] = cec_log_addr2dev(adap, logical_addr); > > + data.msg.reply = 0; > > + dprintk("config: la %d pa %x.%x.%x.%x\n", > > + logical_addr, cec_phys_addr_exp(adap->phys_addr)); > > + return cec_transmit_msg(adap, &data, true); > > +} > > + > > +int cec_enable(struct cec_adapter *adap, bool enable) > > +{ > > + int ret; > > + > > + mutex_lock(&adap->lock); > > + ret = adap->adap_enable(adap, enable); > > + if (ret) { > > + mutex_unlock(&adap->lock); > > + return ret; > > + } > > + if (!enable) { > > + adap->state = CEC_ADAP_STATE_DISABLED; > > + adap->tx_qcount = 0; > > + adap->rx_qcount = 0; > > + adap->ev_qcount = 0; > > + adap->num_log_addrs = 0; > > + } else { > > + adap->state = CEC_ADAP_STATE_UNCONF; > > + } > > + mutex_unlock(&adap->lock); > > + return 0; > > +} > > +EXPORT_SYMBOL_GPL(cec_enable); > > + > > +struct cec_log_addrs_int { > > + struct cec_adapter *adap; > > + struct cec_log_addrs log_addrs; > > + struct completion c; > > + bool free_on_exit; > > + int err; > > +}; > > + > > +static int cec_config_log_addrs(struct cec_adapter *adap, struct > cec_log_addrs *log_addrs) > > +{ > > + static const u8 tv_log_addrs[] = { > > + 0, CEC_LOG_ADDR_INVALID > > + }; > > + static const u8 record_log_addrs[] = { > > + 1, 2, 9, 12, 13, CEC_LOG_ADDR_INVALID > > + }; > > + static const u8 tuner_log_addrs[] = { > > + 3, 6, 7, 10, 12, 13, CEC_LOG_ADDR_INVALID > > + }; > > + static const u8 playback_log_addrs[] = { > > + 4, 8, 11, 12, 13, CEC_LOG_ADDR_INVALID > > + }; > > + static const u8 audiosystem_log_addrs[] = { > > + 5, 12, 13, CEC_LOG_ADDR_INVALID > > + }; > > + static const u8 specific_use_log_addrs[] = { > > + 14, 12, 13, CEC_LOG_ADDR_INVALID > > + }; > > + static const u8 unregistered_log_addrs[] = { > > + CEC_LOG_ADDR_INVALID > > + }; > > + static const u8 *type2addrs[7] = { > > + [CEC_LOG_ADDR_TYPE_TV] = tv_log_addrs, > > + [CEC_LOG_ADDR_TYPE_RECORD] = record_log_addrs, > > + [CEC_LOG_ADDR_TYPE_TUNER] = tuner_log_addrs, > > + [CEC_LOG_ADDR_TYPE_PLAYBACK] = playback_log_addrs, > > + [CEC_LOG_ADDR_TYPE_AUDIOSYSTEM] = audiosystem_log_addrs, > > + [CEC_LOG_ADDR_TYPE_SPECIFIC] = specific_use_log_addrs, > > + [CEC_LOG_ADDR_TYPE_UNREGISTERED] = unregistered_log_addrs, > > + }; > > + struct cec_data data; > > + u32 claimed_addrs = 0; > > + int i, j; > > + int err; > > + > > + if (adap->phys_addr) { > > + /* The TV functionality can only map to physical address 0. > > + For any other address, try the Specific functionality > > + instead as per the spec. */ > > + for (i = 0; i < log_addrs->num_log_addrs; i++) > > + if (log_addrs->log_addr_type[i] == > CEC_LOG_ADDR_TYPE_TV) > > + log_addrs->log_addr_type[i] = > CEC_LOG_ADDR_TYPE_SPECIFIC; > > + } > > + > > + memcpy(adap->prim_device, log_addrs->primary_device_type, > log_addrs->num_log_addrs); > > + dprintk("physical address: %x.%x.%x.%x, claim %d logical > addresses\n", > > + cec_phys_addr_exp(adap->phys_addr), log_addrs- > >num_log_addrs); > > + adap->num_log_addrs = 0; > > + adap->state = CEC_ADAP_STATE_IDLE; > > + > > + /* TODO: remember last used logical addr type to achieve > > + faster logical address polling by trying that one first. > > + */ > > + for (i = 0; i < log_addrs->num_log_addrs; i++) { > > + const u8 *la_list = type2addrs[log_addrs->log_addr_type[i]]; > > + > > + if (kthread_should_stop()) > > + return -EINTR; > > + > > + for (j = 0; la_list[j] != CEC_LOG_ADDR_INVALID; j++) { > > + u8 log_addr = la_list[j]; > > + > > + if (claimed_addrs & (1 << log_addr)) > > + continue; > > + > > + /* Send polling message */ > > + data.msg.len = 1; > > + data.msg.msg[0] = 0xf0 | log_addr; > > + data.msg.reply = 0; > > + err = cec_transmit_msg(adap, &data, true); > > + if (err) > > + return err; > > + if (data.msg.status == CEC_TX_STATUS_RETRY_TIMEOUT) { > > + /* Message not acknowledged, so this logical > > + address is free to use. */ > > + claimed_addrs |= 1 << log_addr; > > + adap->log_addr[adap->num_log_addrs++] = > log_addr; > > + log_addrs->log_addr[i] = log_addr; > > + err = adap->adap_log_addr(adap, log_addr); > > + dprintk("claim addr %d (%d)\n", log_addr, adap- > >prim_device[i]); > > + if (err) > > + return err; > > + cec_report_phys_addr(adap, log_addr); > > + if (adap->claimed_log_addr) > > + adap->claimed_log_addr(adap, i); > > + break; > > + } > > + } > > + } > > + if (adap->num_log_addrs == 0) { > > + if (log_addrs->num_log_addrs > 1) > > + dprintk("could not claim last %d addresses\n", > log_addrs->num_log_addrs - 1); > > + adap->log_addr[adap->num_log_addrs++] = 15; > > + log_addrs->log_addr_type[0] = > CEC_LOG_ADDR_TYPE_UNREGISTERED; > > + log_addrs->log_addr[0] = 15; > > + log_addrs->num_log_addrs = 1; > > + err = adap->adap_log_addr(adap, 15); > > + dprintk("claim addr %d (%d)\n", 15, adap->prim_device[0]); > > + if (err) > > + return err; > > + cec_report_phys_addr(adap, 15); > > + if (adap->claimed_log_addr) > > + adap->claimed_log_addr(adap, 0); > > + } > > + return 0; > > +} > > + > > +static int cec_config_thread_func(void *arg) > > +{ > > + struct cec_log_addrs_int *cla_int = arg; > > + int err; > > + > > + cla_int->err = err = cec_config_log_addrs(cla_int->adap, > &cla_int->log_addrs); > > + cla_int->adap->kthread_config = NULL; > > + if (cla_int->free_on_exit) > > + kfree(cla_int); > > + else > > + complete(&cla_int->c); > > + return err; > > +} > > + > > +int cec_claim_log_addrs(struct cec_adapter *adap, struct > cec_log_addrs *log_addrs, bool block) > > +{ > > + struct cec_log_addrs_int *cla_int; > > + int i; > > + > > + if (adap->state == CEC_ADAP_STATE_DISABLED) > > + return -EINVAL; > > + > > + if (log_addrs->num_log_addrs > CEC_MAX_LOG_ADDRS) > > + return -EINVAL; > > + if (log_addrs->num_log_addrs == 0) { > > + adap->num_log_addrs = 0; > > + adap->state = CEC_ADAP_STATE_IDLE; > > + return 0; > > + } > > + if (log_addrs->cec_version != CEC_VERSION_1_4B && > > + log_addrs->cec_version != CEC_VERSION_2_0) > > + return -EINVAL; > > + if (log_addrs->num_log_addrs > 1) > > + for (i = 0; i < log_addrs->num_log_addrs; i++) > > + if (log_addrs->log_addr_type[i] == > > + CEC_LOG_ADDR_TYPE_UNREGISTERED) > > + return -EINVAL; > > + for (i = 0; i < log_addrs->num_log_addrs; i++) { > > + if (log_addrs->primary_device_type[i] > > CEC_PRIM_DEVTYPE_VIDEOPROC) > > + return -EINVAL; > > + if (log_addrs->primary_device_type[i] == 2) > > + return -EINVAL; > > + if (log_addrs->log_addr_type[i] > > CEC_LOG_ADDR_TYPE_UNREGISTERED) > > + return -EINVAL; > > + } > > + > > + /* For phys addr 0xffff only the Unregistered functionality is > > + allowed. */ > > + if (adap->phys_addr == 0xffff && > > + (log_addrs->num_log_addrs > 1 || > > + log_addrs->log_addr_type[0] != > CEC_LOG_ADDR_TYPE_UNREGISTERED)) > > + return -EINVAL; > > + > > + cla_int = kzalloc(sizeof(*cla_int), GFP_KERNEL); > > + if (cla_int == NULL) > > + return -ENOMEM; > > + init_completion(&cla_int->c); > > + cla_int->free_on_exit = !block; > > + cla_int->adap = adap; > > + cla_int->log_addrs = *log_addrs; > > + adap->kthread_config = kthread_run(cec_config_thread_func, > cla_int, "cec_log_addrs"); > > + if (block) { > > + wait_for_completion(&cla_int->c); > > + *log_addrs = cla_int->log_addrs; > > + kfree(cla_int); > > + } > > + return 0; > > +} > > +EXPORT_SYMBOL_GPL(cec_claim_log_addrs); > > + > > +static unsigned int cec_poll(struct file *filp, > > + struct poll_table_struct *poll) > > +{ > > + struct cec_devnode *cecdev = cec_devnode_data(filp); > > + struct cec_adapter *adap = to_cec_adapter(cecdev); > > + unsigned res = 0; > > + > > + if (!cec_devnode_is_registered(cecdev)) > > + return POLLERR | POLLHUP; > > + mutex_lock(&adap->lock); > > + if (adap->tx_qcount < CEC_TX_QUEUE_SZ) > > + res |= POLLOUT | POLLWRNORM; > > + if (adap->rx_qcount) > > + res |= POLLIN | POLLRDNORM; > > + poll_wait(filp, &adap->waitq, poll); > > + mutex_unlock(&adap->lock); > > + return res; > > +} > > + > > +static long cec_ioctl(struct file *filp, unsigned int cmd, unsigned > long arg) > > +{ > > + struct cec_devnode *cecdev = cec_devnode_data(filp); > > + struct cec_adapter *adap = to_cec_adapter(cecdev); > > + void __user *parg = (void __user *)arg; > > + int err; > > + > > + if (!cec_devnode_is_registered(cecdev)) > > + return -EIO; > > + > > + switch (cmd) { > > + case CEC_G_CAPS: { > > + struct cec_caps caps; > > + > > + caps.available_log_addrs = 3; > > + caps.capabilities = adap->capabilities; > > + caps.version = adap->version; > > + caps.vendor_id = adap->vendor_id; > > + if (copy_to_user(parg, &caps, sizeof(caps))) > > + return -EFAULT; > > + break; > > + } > > + > > + case CEC_TRANSMIT: { > > + struct cec_data data; > > + > > + if (!(adap->capabilities & CEC_CAP_TRANSMIT)) > > + return -ENOTTY; > > + if (copy_from_user(&data.msg, parg, sizeof(data.msg))) > > + return -EFAULT; > > + err = cec_transmit_msg(adap, &data, !(filp->f_flags & > O_NONBLOCK)); > > + if (err) > > + return err; > > + if (copy_to_user(parg, &data.msg, sizeof(data.msg))) > > + return -EFAULT; > > + break; > > + } > > + > > + case CEC_RECEIVE: { > > + struct cec_data data; > > + > > + if (!(adap->capabilities & CEC_CAP_RECEIVE)) > > + return -ENOTTY; > > + if (copy_from_user(&data.msg, parg, sizeof(data.msg))) > > + return -EFAULT; > > + err = cec_receive_msg(adap, &data.msg, !(filp->f_flags & > O_NONBLOCK)); > > + if (err) > > + return err; > > + if (copy_to_user(parg, &data.msg, sizeof(data.msg))) > > + return -EFAULT; > > + break; > > + } > > + > > + case CEC_G_EVENT: { > > + struct cec_event ev; > > + > > + mutex_lock(&adap->lock); > > + err = -EAGAIN; > > + if (adap->ev_qcount) { > > + err = 0; > > + ev = adap->ev_queue[adap->ev_qstart]; > > + adap->ev_qstart = (adap->ev_qstart + 1) % > CEC_EV_QUEUE_SZ; > > + adap->ev_qcount--; > > + } > > + mutex_unlock(&adap->lock); > > + if (err) > > + return err; > > + if (copy_to_user((void __user *)arg, &ev, sizeof(ev))) > > + return -EFAULT; > > + break; > > + } > > + > > + case CEC_G_ADAP_STATE: { > > + u32 state = adap->state != CEC_ADAP_STATE_DISABLED; > > + > > + if (copy_to_user(parg, &state, sizeof(state))) > > + return -EFAULT; > > + break; > > + } > > + > > + case CEC_S_ADAP_STATE: { > > + u32 state; > > + > > + if (!(adap->capabilities & CEC_CAP_STATE)) > > + return -ENOTTY; > > + if (copy_from_user(&state, parg, sizeof(state))) > > + return -EFAULT; > > + if (!state && adap->state == CEC_ADAP_STATE_DISABLED) > > + return 0; > > + if (state && adap->state != CEC_ADAP_STATE_DISABLED) > > + return 0; > > + cec_enable(adap, !!state); > > + break; > > + } > > + > > + case CEC_G_ADAP_PHYS_ADDR: > > + if (copy_to_user(parg, &adap->phys_addr, sizeof(adap- > >phys_addr))) > > + return -EFAULT; > > + break; > > + > > + case CEC_S_ADAP_PHYS_ADDR: { > > + u16 phys_addr; > > + > > + if (!(adap->capabilities & CEC_CAP_PHYS_ADDR)) > > + return -ENOTTY; > > + if (copy_from_user(&phys_addr, parg, sizeof(phys_addr))) > > + return -EFAULT; > > + adap->phys_addr = phys_addr; > > + break; > > + } > > + > > + case CEC_G_ADAP_LOG_ADDRS: { > > + struct cec_log_addrs log_addrs; > > + > > + log_addrs.cec_version = adap->version; > > + log_addrs.num_log_addrs = adap->num_log_addrs; > > + memcpy(log_addrs.primary_device_type, adap->prim_device, > CEC_MAX_LOG_ADDRS); > > + memcpy(log_addrs.log_addr_type, adap->log_addr_type, > CEC_MAX_LOG_ADDRS); > > + memcpy(log_addrs.log_addr, adap->log_addr, > CEC_MAX_LOG_ADDRS); > > + > > + if (copy_to_user(parg, &log_addrs, sizeof(log_addrs))) > > + return -EFAULT; > > + break; > > + } > > + > > + case CEC_S_ADAP_LOG_ADDRS: { > > + struct cec_log_addrs log_addrs; > > + > > + if (!(adap->capabilities & CEC_CAP_LOG_ADDRS)) > > + return -ENOTTY; > > + if (copy_from_user(&log_addrs, parg, sizeof(log_addrs))) > > + return -EFAULT; > > + err = cec_claim_log_addrs(adap, &log_addrs, true); > > + if (err) > > + return err; > > + > > + if (copy_to_user(parg, &log_addrs, sizeof(log_addrs))) > > + return -EFAULT; > > + break; > > + } > > + > > + case CEC_G_VENDOR_ID: > > + if (copy_to_user(parg, &adap->vendor_id, > > + sizeof(adap->vendor_id))) > > + return -EFAULT; > > + break; > > + > > + case CEC_S_VENDOR_ID: { > > + u32 vendor_id; > > + > > + if (!(adap->capabilities & CEC_CAP_VENDOR_ID)) > > + return -ENOTTY; > > + if (copy_from_user(&vendor_id, parg, sizeof(vendor_id))) > > + return -EFAULT; > > + adap->vendor_id = vendor_id; > > + break; > > + } > > + > > + case CEC_G_PROMISCUOUS: { > > + if (copy_to_user(parg, &adap->promiscuous, > > + sizeof(adap->promiscuous))) > > + return -EFAULT; > > + break; > > + } > > + > > + case CEC_S_PROMISCUOUS: { > > + u8 promiscuous; > > + > > + if (!(adap->capabilities & CEC_CAP_PROMISCUOUS)) > > + return -ENOTTY; > > + if (copy_from_user(&promiscuous, parg, sizeof(promiscuous))) > > + return -EFAULT; > > + adap->promiscuous = promiscuous; > > + break; > > + } > > + > > + default: > > + return -ENOTTY; > > + } > > + return 0; > > +} > > + > > +/* Override for the open function */ > > +static int cec_open(struct inode *inode, struct file *filp) > > +{ > > + struct cec_devnode *cecdev; > > + > > + /* Check if the cec device is available. This needs to be done > with > > + * the cec_devnode_lock held to prevent an open/unregister race: > > + * without the lock, the device could be unregistered and freed > between > > + * the cec_devnode_is_registered() and get_device() calls, > leading to > > + * a crash. > > + */ > > + mutex_lock(&cec_devnode_lock); > > + cecdev = container_of(inode->i_cdev, struct cec_devnode, cdev); > > + /* return ENXIO if the cec device has been removed > > + already or if it is not registered anymore. */ > > + if (!cec_devnode_is_registered(cecdev)) { > > + mutex_unlock(&cec_devnode_lock); > > + return -ENXIO; > > + } > > + /* and increase the device refcount */ > > + get_device(&cecdev->dev); > > + mutex_unlock(&cec_devnode_lock); > > + > > + filp->private_data = cecdev; > > + > > + return 0; > > +} > > + > > +/* Override for the release function */ > > +static int cec_release(struct inode *inode, struct file *filp) > > +{ > > + struct cec_devnode *cecdev = cec_devnode_data(filp); > > + int ret = 0; > > + > > + /* decrease the refcount unconditionally since the release() > > + return value is ignored. */ > > + put_device(&cecdev->dev); > > + filp->private_data = NULL; > > + return ret; > > +} > > + > > +static const struct file_operations cec_devnode_fops = { > > + .owner = THIS_MODULE, > > + .open = cec_open, > > + .unlocked_ioctl = cec_ioctl, > > + .release = cec_release, > > + .poll = cec_poll, > > + .llseek = no_llseek, > > +}; > > + > > +/** > > + * cec_devnode_register - register a cec device node > > + * @cecdev: cec device node structure we want to register > > + * > > + * The registration code assigns minor numbers and registers the new > device node > > + * with the kernel. An error is returned if no free minor number can > be found, > > + * or if the registration of the device node fails. > > + * > > + * Zero is returned on success. > > + * > > + * Note that if the cec_devnode_register call fails, the release() > callback of > > + * the cec_devnode structure is *not* called, so the caller is > responsible for > > + * freeing any data. > > + */ > > +static int __must_check cec_devnode_register(struct cec_devnode > *cecdev, > > + struct module *owner) > > +{ > > + int minor; > > + int ret; > > + > > + /* Part 1: Find a free minor number */ > > + mutex_lock(&cec_devnode_lock); > > + minor = find_next_zero_bit(cec_devnode_nums, CEC_NUM_DEVICES, 0); > > + if (minor == CEC_NUM_DEVICES) { > > + mutex_unlock(&cec_devnode_lock); > > + pr_err("could not get a free minor\n"); > > + return -ENFILE; > > + } > > + > > + set_bit(minor, cec_devnode_nums); > > + mutex_unlock(&cec_devnode_lock); > > + > > + cecdev->minor = minor; > > + > > + /* Part 2: Initialize and register the character device */ > > + cdev_init(&cecdev->cdev, &cec_devnode_fops); > > + cecdev->cdev.owner = owner; > > + > > + ret = cdev_add(&cecdev->cdev, MKDEV(MAJOR(cec_dev_t), cecdev- > >minor), 1); > > + if (ret < 0) { > > + pr_err("%s: cdev_add failed\n", __func__); > > + goto error; > > + } > > + > > + /* Part 3: Register the cec device */ > > + cecdev->dev.bus = &cec_bus_type; > > + cecdev->dev.devt = MKDEV(MAJOR(cec_dev_t), cecdev->minor); > > + cecdev->dev.release = cec_devnode_release; > > + if (cecdev->parent) > > + cecdev->dev.parent = cecdev->parent; > > + dev_set_name(&cecdev->dev, "cec%d", cecdev->minor); > > + ret = device_register(&cecdev->dev); > > + if (ret < 0) { > > + pr_err("%s: device_register failed\n", __func__); > > + goto error; > > + } > > + > > + /* Part 4: Activate this minor. The char device can now be used. > */ > > + set_bit(CEC_FLAG_REGISTERED, &cecdev->flags); > > + > > + return 0; > > + > > +error: > > + cdev_del(&cecdev->cdev); > > + clear_bit(cecdev->minor, cec_devnode_nums); > > + return ret; > > +} > > + > > +/** > > + * cec_devnode_unregister - unregister a cec device node > > + * @cecdev: the device node to unregister > > + * > > + * This unregisters the passed device. Future open calls will be met > with > > + * errors. > > + * > > + * This function can safely be called if the device node has never > been > > + * registered or has already been unregistered. > > + */ > > +static void cec_devnode_unregister(struct cec_devnode *cecdev) > > +{ > > + /* Check if cecdev was ever registered at all */ > > + if (!cec_devnode_is_registered(cecdev)) > > + return; > > + > > + mutex_lock(&cec_devnode_lock); > > + clear_bit(CEC_FLAG_REGISTERED, &cecdev->flags); > > + mutex_unlock(&cec_devnode_lock); > > + device_unregister(&cecdev->dev); > > +} > > + > > +int cec_create_adapter(struct cec_adapter *adap, const char *name, > u32 caps) > > +{ > > + int res = 0; > > + > > + adap->state = CEC_ADAP_STATE_DISABLED; > > + adap->name = name; > > + adap->phys_addr = 0xffff; > > + adap->capabilities = caps; > > + adap->version = CEC_VERSION_1_4B; > > + mutex_init(&adap->lock); > > + adap->kthread = kthread_run(cec_thread_func, adap, name); > > + init_waitqueue_head(&adap->kthread_waitq); > > + init_waitqueue_head(&adap->waitq); > > + if (IS_ERR(adap->kthread)) { > > + pr_err("cec-%s: kernel_thread() failed\n", name); > > + return PTR_ERR(adap->kthread); > > + } > > + if (caps) { > > + res = cec_devnode_register(&adap->devnode, adap->owner); > > + if (res) > > + kthread_stop(adap->kthread); > > + } > > + adap->recv_notifier = cec_receive_notify; > > + > > + /* Prepare the RC input device */ > > + adap->rc = rc_allocate_device(); > > + if (!adap->rc) { > > + pr_err("cec-%s: failed to allocate memory for rc_dev\n", > name); > > + cec_devnode_unregister(&adap->devnode); > > + kthread_stop(adap->kthread); > > + return -ENOMEM; > > + } > > + > > + snprintf(adap->input_name, sizeof(adap->input_name), "RC for %s", > name); > > + snprintf(adap->input_phys, sizeof(adap->input_phys), "%s/input0", > name); > > + strncpy(adap->input_drv, name, sizeof(adap->input_drv)); > > + > > + adap->rc->input_name = adap->input_name; > > + adap->rc->input_phys = adap->input_phys; > > + adap->rc->dev.parent = &adap->devnode.dev; > > + adap->rc->driver_name = adap->input_drv; > > + adap->rc->driver_type = RC_DRIVER_CEC; > > + adap->rc->allowed_protocols = RC_BIT_CEC; > > + adap->rc->priv = adap; > > + adap->rc->map_name = RC_MAP_CEC; > > + adap->rc->timeout = MS_TO_NS(100); > > + > > + res = rc_register_device(adap->rc); > > + > > + if (res) { > > + pr_err("cec-%s: failed to prepare input device\n", name); > > + cec_devnode_unregister(&adap->devnode); > > + rc_free_device(adap->rc); > > + kthread_stop(adap->kthread); > > + } > > + > > + return res; > > +} > > +EXPORT_SYMBOL_GPL(cec_create_adapter); > > + > > +void cec_delete_adapter(struct cec_adapter *adap) > > +{ > > + if (adap->kthread == NULL) > > + return; > > + kthread_stop(adap->kthread); > > + if (adap->kthread_config) > > + kthread_stop(adap->kthread_config); > > + adap->state = CEC_ADAP_STATE_DISABLED; > > + if (cec_devnode_is_registered(&adap->devnode)) > > + cec_devnode_unregister(&adap->devnode); > > +} > > +EXPORT_SYMBOL_GPL(cec_delete_adapter); > > + > > +/* > > + * Initialise cec for linux > > + */ > > +static int __init cec_devnode_init(void) > > +{ > > + int ret; > > + > > + pr_info("Linux cec interface: v0.10\n"); > > + ret = alloc_chrdev_region(&cec_dev_t, 0, CEC_NUM_DEVICES, > > + CEC_NAME); > > + if (ret < 0) { > > + pr_warn("cec: unable to allocate major\n"); > > + return ret; > > + } > > + > > + ret = bus_register(&cec_bus_type); > > + if (ret < 0) { > > + unregister_chrdev_region(cec_dev_t, CEC_NUM_DEVICES); > > + pr_warn("cec: bus_register failed\n"); > > + return -EIO; > > + } > > + > > + return 0; > > +} > > + > > +static void __exit cec_devnode_exit(void) > > +{ > > + bus_unregister(&cec_bus_type); > > + unregister_chrdev_region(cec_dev_t, CEC_NUM_DEVICES); > > +} > > + > > +subsys_initcall(cec_devnode_init); > > +module_exit(cec_devnode_exit) > > + > > +MODULE_AUTHOR("Hans Verkuil <hans.verkuil@xxxxxxxxx>"); > > +MODULE_DESCRIPTION("Device node registration for cec drivers"); > > +MODULE_LICENSE("GPL"); > > diff --git a/include/media/cec.h b/include/media/cec.h > > new file mode 100644 > > index 0000000..0753e9b > > --- /dev/null > > +++ b/include/media/cec.h > > @@ -0,0 +1,137 @@ > > +#ifndef _CEC_DEVNODE_H > > +#define _CEC_DEVNODE_H > > + > > +#include <linux/poll.h> > > +#include <linux/fs.h> > > +#include <linux/device.h> > > +#include <linux/cdev.h> > > +#include <linux/kthread.h> > > +#include <linux/cec.h> > > +#include <media/rc-core.h> > > + > > +#define cec_phys_addr_exp(pa) \ > > + ((pa) >> 12), ((pa) >> 8) & 0xf, ((pa) >> 4) & 0xf, (pa) & 0xf > > + > > +/* > > + * Flag to mark the cec_devnode struct as registered. Drivers must > not touch > > + * this flag directly, it will be set and cleared by > cec_devnode_register and > > + * cec_devnode_unregister. > > + */ > > +#define CEC_FLAG_REGISTERED 0 > > + > > +/** > > + * struct cec_devnode - cec device node > > + * @parent: parent device > > + * @minor: device node minor number > > + * @flags: flags, combination of the CEC_FLAG_* constants > > + * > > + * This structure represents a cec-related device node. > > + * > > + * The @parent is a physical device. It must be set by core or > device drivers > > + * before registering the node. > > + */ > > +struct cec_devnode { > > + /* sysfs */ > > + struct device dev; /* cec device */ > > + struct cdev cdev; /* character device */ > > + struct device *parent; /* device parent */ > > + > > + /* device info */ > > + int minor; > > + unsigned long flags; /* Use bitops to access flags */ > > + > > + /* callbacks */ > > + void (*release)(struct cec_devnode *cecdev); > > +}; > > + > > +static inline int cec_devnode_is_registered(struct cec_devnode > *cecdev) > > +{ > > + return test_bit(CEC_FLAG_REGISTERED, &cecdev->flags); > > +} > > + > > +struct cec_adapter; > > +struct cec_data; > > + > > +typedef int (*cec_notify)(struct cec_adapter *adap, struct cec_data > *data, void *priv); > > +typedef int (*cec_recv_notify)(struct cec_adapter *adap, struct > cec_msg *msg); > > + > > +struct cec_data { > > + struct cec_msg msg; > > + cec_notify func; > > + void *priv; > > +}; > > + > > +/* Unconfigured state */ > > +#define CEC_ADAP_STATE_DISABLED 0 > > +#define CEC_ADAP_STATE_UNCONF 1 > > +#define CEC_ADAP_STATE_IDLE 2 > > +#define CEC_ADAP_STATE_TRANSMITTING 3 > > +#define CEC_ADAP_STATE_WAIT 4 > > +#define CEC_ADAP_STATE_RECEIVED 5 > > + > > +#define CEC_TX_QUEUE_SZ (4) > > +#define CEC_RX_QUEUE_SZ (4) > > +#define CEC_EV_QUEUE_SZ (16) > > + > > +struct cec_adapter { > > + struct module *owner; > > + const char *name; > > + struct cec_devnode devnode; > > + struct mutex lock; > > + struct rc_dev *rc; > > + > > + struct cec_data tx_queue[CEC_TX_QUEUE_SZ]; > > + u8 tx_qstart, tx_qcount; > > + > > + struct cec_msg rx_queue[CEC_RX_QUEUE_SZ]; > > + u8 rx_qstart, rx_qcount; > > + > > + struct cec_event ev_queue[CEC_EV_QUEUE_SZ]; > > + u8 ev_qstart, ev_qcount; > > + > > + cec_recv_notify recv_notifier; > > + struct task_struct *kthread_config; > > + > > + struct task_struct *kthread; > > + wait_queue_head_t kthread_waitq; > > + wait_queue_head_t waitq; > > + > > + u8 state; > > + u32 capabilities; > > + u16 phys_addr; > > + u32 vendor_id; > > + u8 version; > > + u8 num_log_addrs; > > + u8 prim_device[CEC_MAX_LOG_ADDRS]; > > + u8 log_addr_type[CEC_MAX_LOG_ADDRS]; > > + u8 log_addr[CEC_MAX_LOG_ADDRS]; > > + u8 promiscuous; > > + > > + char input_name[32]; > > + char input_phys[32]; > > + char input_drv[32]; > > + > > + int (*adap_enable)(struct cec_adapter *adap, bool enable); > > + int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr); > > + int (*adap_transmit)(struct cec_adapter *adap, struct cec_msg > *msg); > > + void (*adap_transmit_timed_out)(struct cec_adapter *adap); > > + > > + void (*claimed_log_addr)(struct cec_adapter *adap, u8 idx); > > + int (*received)(struct cec_adapter *adap, struct cec_msg *msg); > > +}; > > + > > +#define to_cec_adapter(node) container_of(node, struct cec_adapter, > devnode) > > + > > +int cec_create_adapter(struct cec_adapter *adap, const char *name, > u32 caps); > > +void cec_delete_adapter(struct cec_adapter *adap); > > +int cec_transmit_msg(struct cec_adapter *adap, struct cec_data *data, > bool block); > > +int cec_receive_msg(struct cec_adapter *adap, struct cec_msg *msg, > bool block); > > +void cec_post_event(struct cec_adapter *adap, u32 event); > > +int cec_claim_log_addrs(struct cec_adapter *adap, struct > cec_log_addrs *log_addrs, bool block); > > +int cec_enable(struct cec_adapter *adap, bool enable); > > + > > +/* Called by the adapter */ > > +void cec_transmit_done(struct cec_adapter *adap, u32 status); > > +void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg); > > + > > +#endif /* _CEC_DEVNODE_H */ > > diff --git a/include/uapi/linux/cec.h b/include/uapi/linux/cec.h > > new file mode 100644 > > index 0000000..c500ea9 > > --- /dev/null > > +++ b/include/uapi/linux/cec.h > > @@ -0,0 +1,283 @@ > > +#ifndef _CEC_H > > +#define _CEC_H > > + > > +#include <linux/types.h> > > + > > +struct cec_msg { > > + __u32 len; > > + __u8 msg[16]; > > + __u32 status; > > + /* If non-zero, then wait for a reply with this opcode. > > + If there was an error when sending the msg or FeatureAbort > > + was returned, then reply is set to 0. > > + If reply is non-zero upon return, then len/msg are set to > > + the received message. > > + If reply is zero upon return and status has the > CEC_TX_STATUS_FEATURE_ABORT > > + bit set, then len/msg are set to the received feature abort > message. > > + If reply is zero upon return and status has the > CEC_TX_STATUS_REPLY_TIMEOUT > > + bit set, then no reply was seen at all. > > + This field is ignored with CEC_RECEIVE. > > + If reply is non-zero for CEC_TRANSMIT and the message is a > broadcast, > > + then -EINVAL is returned. > > + if reply is non-zero, then timeout is set to 1000 (the > required maximum > > + response time). > > + */ > > + __u8 reply; > > + /* timeout (in ms) is used to timeout CEC_RECEIVE. > > + Set to 0 if you want to wait forever. */ > > + __u32 timeout; > > + struct timespec ts; > > +}; > > + > > +static inline __u8 cec_msg_initiator(const struct cec_msg *msg) > > +{ > > + return msg->msg[0] >> 4; > > +} > > + > > +static inline __u8 cec_msg_destination(const struct cec_msg *msg) > > +{ > > + return msg->msg[0] & 0xf; > > +} > > + > > +static inline bool cec_msg_is_broadcast(const struct cec_msg *msg) > > +{ > > + return (msg->msg[0] & 0xf) == 0xf; > > +} > > + > > +/* cec status field */ > > +#define CEC_TX_STATUS_OK (0) > > +#define CEC_TX_STATUS_ARB_LOST (1 << 0) > > +#define CEC_TX_STATUS_RETRY_TIMEOUT (1 << 1) > > +#define CEC_TX_STATUS_FEATURE_ABORT (1 << 2) > > +#define CEC_TX_STATUS_REPLY_TIMEOUT (1 << 3) > > +#define CEC_RX_STATUS_READY (0) > > + > > +#define CEC_LOG_ADDR_INVALID 0xff > > + > > +/* The maximum number of logical addresses one device can be > assigned to. > > + * The CEC 2.0 spec allows for only 2 logical addresses at the > moment. The > > + * Analog Devices CEC hardware supports 3. So let's go wild and go > for 4. */ > > +#define CEC_MAX_LOG_ADDRS 4 > > + > > +/* The "Primary Device Type" */ > > +#define CEC_PRIM_DEVTYPE_TV 0 > > +#define CEC_PRIM_DEVTYPE_RECORD 1 > > +#define CEC_PRIM_DEVTYPE_TUNER 3 > > +#define CEC_PRIM_DEVTYPE_PLAYBACK 4 > > +#define CEC_PRIM_DEVTYPE_AUDIOSYSTEM 5 > > +#define CEC_PRIM_DEVTYPE_SWITCH 6 > > +#define CEC_PRIM_DEVTYPE_VIDEOPROC 7 > > + > > +/* The "All Device Types" flags (CEC 2.0) */ > > +#define CEC_FL_ALL_DEVTYPE_TV (1 << 7) > > +#define CEC_FL_ALL_DEVTYPE_RECORD (1 << 6) > > +#define CEC_FL_ALL_DEVTYPE_TUNER (1 << 5) > > +#define CEC_FL_ALL_DEVTYPE_PLAYBACK (1 << 4) > > +#define CEC_FL_ALL_DEVTYPE_AUDIOSYSTEM (1 << 3) > > +#define CEC_FL_ALL_DEVTYPE_SWITCH (1 << 2) > > +/* And if you wondering what happened to VIDEOPROC devices: those > should > > + * be mapped to a SWITCH. */ > > + > > +/* The logical address types that the CEC device wants to claim */ > > +#define CEC_LOG_ADDR_TYPE_TV 0 > > +#define CEC_LOG_ADDR_TYPE_RECORD 1 > > +#define CEC_LOG_ADDR_TYPE_TUNER 2 > > +#define CEC_LOG_ADDR_TYPE_PLAYBACK 3 > > +#define CEC_LOG_ADDR_TYPE_AUDIOSYSTEM 4 > > +#define CEC_LOG_ADDR_TYPE_SPECIFIC 5 > > +#define CEC_LOG_ADDR_TYPE_UNREGISTERED 6 > > +/* Switches should use UNREGISTERED. > > + * Video processors should use SPECIFIC. */ > > + > > +/* The CEC version */ > > +#define CEC_VERSION_1_4B 5 > > +#define CEC_VERSION_2_0 6 > > + > > +struct cec_event { > > + __u32 event; > > + struct timespec ts; > > +}; > > + > > +/* Userspace has to configure the adapter state (enable/disable) */ > > +#define CEC_CAP_STATE (1 << 0) > > +/* Userspace has to configure the physical address */ > > +#define CEC_CAP_PHYS_ADDR (1 << 1) > > +/* Userspace has to configure the logical addresses */ > > +#define CEC_CAP_LOG_ADDRS (1 << 2) > > +/* Userspace can transmit messages */ > > +#define CEC_CAP_TRANSMIT (1 << 3) > > +/* Userspace can receive messages */ > > +#define CEC_CAP_RECEIVE (1 << 4) > > +/* Userspace has to configure the vendor id */ > > +#define CEC_CAP_VENDOR_ID (1 << 5) > > +/* The hardware has the possibility to work in the promiscuous mode > */ > > +#define CEC_CAP_PROMISCUOUS (1 << 6) > > + > > +struct cec_caps { > > + __u32 available_log_addrs; > > + __u32 capabilities; > > + __u32 vendor_id; > > + __u8 version; > > +}; > > + > > +struct cec_log_addrs { > > + __u8 cec_version; > > + __u8 num_log_addrs; > > + __u8 primary_device_type[CEC_MAX_LOG_ADDRS]; > > + __u8 log_addr_type[CEC_MAX_LOG_ADDRS]; > > + __u8 log_addr[CEC_MAX_LOG_ADDRS]; > > + > > + /* CEC 2.0 */ > > + __u8 all_device_types; > > + __u8 features[CEC_MAX_LOG_ADDRS][12]; > > +}; > > + > > +/* Commands */ > > + > > +/* One Touch Play Feature */ > > +#define CEC_OP_ACTIVE_SOURCE 0x82 > > +#define CEC_OP_IMAGE_VIEW_ON 0x04 > > +#define CEC_OP_TEXT_VIEW_ON 0x0d > > + > > +/* Routing Control Feature */ > > +#define CEC_OP_ACTIVE_SOURCE 0x82 > > +#define CEC_OP_INACTIVE_SOURCE 0x9d > > +#define CEC_OP_REQUEST_ACTIVE_SOURCE 0x85 > > +#define CEC_OP_ROUTING_CHANGE 0x80 > > +#define CEC_OP_ROUTING_INFORMATION 0x81 > > +#define CEC_OP_SET_STREAM_PATH 0x86 > > + > > +/* Standby Feature */ > > +#define CEC_OP_STANDBY 0x36 > > + > > +/* One Touch Record Feature */ > > +#define CEC_OP_RECORD_OFF 0x0b > > +#define CEC_OP_RECORD_ON 0x09 > > +#define CEC_OP_RECORD_STATUS 0x0a > > +#define CEC_OP_RECORD_TV_SCREEN 0x0f > > + > > +/* Timer Programming Feature */ > > +#define CEC_OP_CLEAR_ANALOGUE_TIMER 0x33 > > +#define CEC_OP_CLEAR_DIGITAL_TIMER 0x99 > > +#define CEC_OP_CLEAR_EXT_TIMER 0xa1 > > +#define CEC_OP_SET_ANALOGUE_TIMER 0x34 > > +#define CEC_OP_SET_DIGITAL_TIMER 0x97 > > +#define CEC_OP_SET_EXT_TIMER 0xa2 > > +#define CEC_OP_SET_EXT_PROGRAM_TIMER 0x67 > > +#define CEC_OP_TIMER_CLEARED_STATUS 0x43 > > +#define CEC_OP_TIMER_STATUS 0x35 > > + > > +/* System Information Feature */ > > +#define CEC_OP_CEC_VERSION 0x9e > > +#define CEC_OP_GET_CEC_VERSION 0x9f > > +#define CEC_OP_GIVE_PHYSICAL_ADDR 0x83 > > +#define CEC_OP_GET_MENU_LANGUAGE 0x91 > > +#define CEC_OP_REPORT_PHYSICAL_ADDR 0x84 > > +#define CEC_OP_SET_MENU_LANGUAGE 0x32 > > + > > +/* Deck Control Feature */ > > +#define CEC_OP_DECK_CONTROL 0x42 > > +#define CEC_OP_DECK_STATUS 0x1b > > +#define CEC_OP_GIVE_DECK_STATUS 0x1a > > +#define CEC_OP_PLAY 0x41 > > + > > +/* Tuner Control Feature */ > > +#define CEC_OP_GIVE_TUNER_DEVICE_STATUS 0x08 > > +#define CEC_OP_SELECT_ANALOGUE_SERVICE 0x92 > > +#define CEC_OP_SELECT_DIGITAL_SERVICE 0x93 > > +#define CEC_OP_TUNER_DEVICE_STATUS 0x07 > > +#define CEC_OP_TUNER_STEP_DECREMENT 0x06 > > +#define CEC_OP_TUNER_STEP_INCREMENT 0x05 > > + > > +/* Vendor Specific Commands Feature */ > > +#define CEC_OP_CEC_VERSION 0x9e > > +#define CEC_OP_DEVICE_VENDOR_ID 0x87 > > +#define CEC_OP_GET_CEC_VERSION 0x9f > > +#define CEC_OP_GIVE_DEVICE_VENDOR_ID 0x8c > > +#define CEC_OP_VENDOR_COMMAND 0x89 > > +#define CEC_OP_VENDOR_COMMAND_WITH_ID 0xa0 > > +#define CEC_OP_VENDOR_REMOTE_BUTTON_DOWN 0x8a > > +#define CEC_OP_VENDOR_REMOTE_BUTTON_UP 0x8b > > + > > +/* OSD Display Feature */ > > +#define CEC_OP_SET_OSD_STRING 0x64 > > + > > +/* Device OSD Transfer Feature */ > > +#define CEC_OP_GIVE_OSD_NAME 0x46 > > +#define CEC_OP_SET_OSD_NAME 0x47 > > + > > +/* Device Menu Control Feature */ > > +#define CEC_OP_MENU_REQUEST 0x8d > > +#define CEC_OP_MENU_STATUS 0x8e > > +#define CEC_OP_USER_CONTROL_PRESSED 0x44 > > +#define CEC_OP_USER_CONTROL_RELEASED 0x45 > > + > > +/* Power Status Feature */ > > +#define CEC_OP_GIVE_DEVICE_POWER_STATUS 0x8f > > +#define CEC_OP_REPORT_POWER_STATUS 0x90 > > +#define CEC_OP_FEATURE_ABORT 0x00 > > +#define CEC_OP_ABORT 0xff > > + > > +/* System Audio Control Feature */ > > +#define CEC_OP_GIVE_AUDIO_STATUS 0x71 > > +#define CEC_OP_GIVE_SYSTEM_AUDIO_MODE_STATUS 0x7d > > +#define CEC_OP_REPORT_AUDIO_STATUS 0x7a > > +#define CEC_OP_SET_SYSTEM_AUDIO_MODE 0x72 > > +#define CEC_OP_SYSTEM_AUDIO_MODE_REQUEST 0x70 > > +#define CEC_OP_SYSTEM_AUDIO_MODE_STATUS 0x7e > > + > > +/* Audio Rate Control Feature */ > > +#define CEC_OP_SET_AUDIO_RATE 0x9a > > + > > +/* ioctls */ > > + > > +#define CEC_EVENT_READY 1 > > +#define CEC_EVENT_DISCONNECT 2 > > + > > +/* issue a CEC command */ > > +#define CEC_G_CAPS _IOWR('a', 0, struct cec_caps) > > +#define CEC_TRANSMIT _IOWR('a', 1, struct cec_msg) > > +#define CEC_RECEIVE _IOWR('a', 2, struct cec_msg) > > + > > +/* > > + Configure the CEC adapter. It sets the device type and which > > + logical types it will try to claim. It will return which > > + logical addresses it could actually claim. > > + An error is returned if the adapter is disabled or if there > > + is no physical address assigned. > > + */ > > + > > +#define CEC_G_ADAP_LOG_ADDRS _IOR('a', 3, struct cec_log_addrs) > > +#define CEC_S_ADAP_LOG_ADDRS _IOWR('a', 4, struct cec_log_addrs) > > + > > +/* > > + Enable/disable the adapter. The Set state ioctl may not > > + be available if that is handled internally. > > + */ > > +#define CEC_G_ADAP_STATE _IOR('a', 5, __u32) > > +#define CEC_S_ADAP_STATE _IOW('a', 6, __u32) > > + > > +/* > > + phys_addr is either 0 (if this is the CEC root device) > > + or a valid physical address obtained from the sink's EDID > > + as read by this CEC device (if this is a source device) > > + or a physical address obtained and modified from a sink > > + EDID and used for a sink CEC device. > > + If nothing is connected, then phys_addr is 0xffff. > > + See HDMI 1.4b, section 8.7 (Physical Address). > > + > > + The Set ioctl may not be available if that is handled > > + internally. > > + */ > > +#define CEC_G_ADAP_PHYS_ADDR _IOR('a', 7, __u16) > > +#define CEC_S_ADAP_PHYS_ADDR _IOW('a', 8, __u16) > > + > > +#define CEC_G_EVENT _IOWR('a', 9, struct cec_event) > > + > > +#define CEC_G_VENDOR_ID _IOR('a', 10, __u32) > > +#define CEC_S_VENDOR_ID _IOW('a', 11, __u32) > > + > > +#define CEC_G_PROMISCUOUS _IOR('a', 12, __u8) > > +#define CEC_S_PROMISCUOUS _IOW('a', 13, __u8) > > + > > +#endif > > > > Regards, > > Hans > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" > in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html Best wishes, -- Kamil Debski Samsung R&D Institute Poland -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
