On Tue, Mar 31, 2015 at 10:05:59AM -0500, Aaron Sierra wrote: > Eliminate redundant calculations by performing millisecond to jiffy > calculations once during driver initialization. > > Signed-off-by: Aaron Sierra <asierra@xxxxxxxxxxx> Applied, thank you. > --- > drivers/input/touchscreen/tsc2007.c | 11 ++++++----- > 1 file changed, 6 insertions(+), 5 deletions(-) > > diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c > index 1bf9906..4e97afb 100644 > --- a/drivers/input/touchscreen/tsc2007.c > +++ b/drivers/input/touchscreen/tsc2007.c > @@ -214,8 +214,7 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle) > dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt); > } > > - wait_event_timeout(ts->wait, ts->stopped, > - msecs_to_jiffies(ts->poll_period)); > + wait_event_timeout(ts->wait, ts->stopped, ts->poll_period); > } > > dev_dbg(&ts->client->dev, "UP\n"); > @@ -314,9 +313,9 @@ static int tsc2007_probe_dt(struct i2c_client *client, struct tsc2007 *ts) > ts->fuzzz = val32; > > if (!of_property_read_u64(np, "ti,poll-period", &val64)) > - ts->poll_period = val64; > + ts->poll_period = msecs_to_jiffies(val64); > else > - ts->poll_period = 1; > + ts->poll_period = msecs_to_jiffies(1); > > if (!of_property_read_u32(np, "ti,x-plate-ohms", &val32)) { > ts->x_plate_ohms = val32; > @@ -350,7 +349,9 @@ static int tsc2007_probe_pdev(struct i2c_client *client, struct tsc2007 *ts, > ts->model = pdata->model; > ts->x_plate_ohms = pdata->x_plate_ohms; > ts->max_rt = pdata->max_rt ? : MAX_12BIT; > - ts->poll_period = pdata->poll_period ? : 1; > + ts->poll_period = pdata->poll_period ? > + msecs_to_jiffies(pdata->poll_period) : > + msecs_to_jiffies(1); > ts->get_pendown_state = pdata->get_pendown_state; > ts->clear_penirq = pdata->clear_penirq; > ts->fuzzx = pdata->fuzzx; > -- > 1.9.1 -- Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html