Add a binding document for a generic ADC keypad. Buttons on an ADC
keypad are connected in a resistor ladder to an ADC. The binding
describes the mapping of ADC channel and voltage ranges to buttons.
Note that this binding only describes simple ADC keypads where only
a single button press can be detected at once per ADC channel.
Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
Cc: Jonathan Cameron <jic23@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Pawel Moll <pawel.moll@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
---
Changes from v1:
- Made linux,input-type a required property.
---
.../devicetree/bindings/input/adc-keys.txt | 41 ++++++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/adc-keys.txt
diff --git a/Documentation/devicetree/bindings/input/adc-keys.txt b/Documentation/devicetree/bindings/input/adc-keys.txt
new file mode 100644
index 0000000..e531f25
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adc-keys.txt
@@ -0,0 +1,41 @@
+Generic ADC keypad
+==================
+
+Required properties:
+ - compatible: "adc-keys"
+ - poll-interval: Polling interval time in ms.
+ - io-channels: List of IIO channels used by the keypad.
+ See ../iio/iio-bindings.txt for details.
+
+Optional properties:
+ - autorepeat: Enable auto-repeat.
+
+Each button on the ADC keypad is represented by a sub-node.
+
+Required sub-node properties:
+ - label: Descriptive name for the key.
+ - linux,code: Keycode to emit.
+ - linux,input-type: Event type this key generates.
+ - channel: IIO channel (index into the 'io-channels' above) to which this
+ button is attached.
+ - min-voltage: Minimum voltage in uV when this key is pressed.
+ - max-voltage: Maximum voltage in uV when this key is pressed.
+
+Example:
+
+adc-keypad {
+ compatible = "adc-keys";
+ poll-interval = <100>;
+ io-channels = <&adc 0>, <&adc 1>;
+
+ vol-up-button {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ linux,input-type = <EV_KEY>;
+ channel = <0>;
+ min-voltage = <1600000>;
+ max-voltage = <1640000>;
+ };
+
+ ...
+};
--
2.2.0.rc0.207.ga3a616c
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
