On Fri, Mar 27, 2015 at 05:43:17PM -0700, Andrew Bresticker wrote:
> Add a binding document for a generic ADC keypad. Buttons on an ADC
> keypad are connected in a resistor ladder to an ADC. The binding
> describes the mapping of ADC channel and voltage ranges to buttons.
>
> Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Pawel Moll <pawel.moll@xxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/input/adc-keys.txt | 43 ++++++++++++++++++++++
> 1 file changed, 43 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/adc-keys.txt
>
> diff --git a/Documentation/devicetree/bindings/input/adc-keys.txt b/Documentation/devicetree/bindings/input/adc-keys.txt
> new file mode 100644
> index 0000000..c9a57de
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/adc-keys.txt
> @@ -0,0 +1,43 @@
> +Generic ADC keypad
> +==================
> +
> +Required properties:
> + - compatible: "adc-keys"
> + - poll-interval: Polling interval time in ms.
> + - io-channels: List of IIO channels used by the keypad.
> + See ../iio/iio-bindings.txt for details.
> +
> +Optional properties:
> + - autorepeat: Enable auto-repeat.
> +
> +Each button on the ADC keypad is represented by a sub-node.
> +
> +Required sub-node properties:
> + - label: Descriptive name for the key.
> + - linux,code: Keycode to emit.
> + - channel: IIO channel (index into the 'io-channels' above) to which this
> + button is attached.
> + - min-voltage: Minimum voltage in uV when this key is pressed.
> + - max-voltage: Maximum voltage in uV when this key is pressed.
> +
> +Optional sub-node properties:
> + - linux,input-type: Event type this key generates. Defaults to 1 (EV_KEY) if
> + not specified.
I'd rather we have it defined explicitly in the binding, i.e. make it a
required property?
> +
> +Example:
> +
> +adc-keypad {
> + compatible = "adc-keys";
> + poll-interval = <100>;
> + io-channels = <&adc 0>, <&adc 1>;
> +
> + vol-up-button {
> + label = "Volume Up";
> + linux,code = <KEY_VOLUMEUP>;
> + channel = <0>;
> + min-voltage = <1600000>;
> + max-voltage = <1640000>;
> + };
> +
> + ...
> +};
> --
> 2.2.0.rc0.207.ga3a616c
>
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
