On Asus TP500LN and X750JN, the touchpad absolute mode is reset each
time set_rate is done.
In order to fix this, we will verify the firmware version, and if it
matches the one in those laptops, the set_rate function is overloaded
with a function elantech_set_rate_restore_reg_07 that perfoms the
set_rate with the original function, followed by a restore of reg_07
(the register that sets the absolute mode on elantech v4 hardware).
Also the asus TP500LN and X750JN firmware version, capabilities, and
button constellation is added to elantech.c
Reported-and-tested-by: George Moutsopoulos <gmoutso@xxxxxxxxxxx>
Signed-off-by: Ulrik De Bie <ulrik.debie-os@xxxxxxxxx>
---
drivers/input/mouse/elantech.c | 22 ++++++++++++++++++++++
drivers/input/mouse/elantech.h | 1 +
2 files changed, 23 insertions(+)
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 6e22682..991dc6b 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -893,6 +893,21 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
}
/*
+ * This writes the reg_07 value again to the hardware at the end of every
+ * set_rate call because the register loses its value. reg_07 allows setting
+ * absolute mode on v4 hardware
+ */
+static void elantech_set_rate_restore_reg_07(struct psmouse *psmouse,
+ unsigned int rate)
+{
+ struct elantech_data *etd = psmouse->private;
+
+ etd->original_set_rate(psmouse, rate);
+ if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
+ psmouse_err(psmouse, "restoring reg_07 failed\n");
+}
+
+/*
* Put the touchpad into absolute mode
*/
static int elantech_set_absolute_mode(struct psmouse *psmouse)
@@ -1094,6 +1109,8 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse,
* Asus K53SV 0x450f01 78, 15, 0c 2 hw buttons
* Asus G46VW 0x460f02 00, 18, 0c 2 hw buttons
* Asus G750JX 0x360f00 00, 16, 0c 2 hw buttons
+ * Asus TP500LN 0x381f17 10, 14, 0e clickpad
+ * Asus X750JN 0x381f17 10, 14, 0e clickpad
* Asus UX31 0x361f00 20, 15, 0e clickpad
* Asus UX32VD 0x361f02 00, 15, 0e clickpad
* Avatar AVIU-145A2 0x361f00 ? clickpad
@@ -1635,6 +1652,11 @@ int elantech_init(struct psmouse *psmouse)
goto init_fail;
}
+ if (etd->fw_version == 0x381f17) {
+ etd->original_set_rate = psmouse->set_rate;
+ psmouse->set_rate = elantech_set_rate_restore_reg_07;
+ }
+
if (elantech_set_input_params(psmouse)) {
psmouse_err(psmouse, "failed to query touchpad range.\n");
goto init_fail;
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index 6f3afec..f965d15 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -142,6 +142,7 @@ struct elantech_data {
struct finger_pos mt[ETP_MAX_FINGERS];
unsigned char parity[256];
int (*send_cmd)(struct psmouse *psmouse, unsigned char c, unsigned char *param);
+ void (*original_set_rate)(struct psmouse *psmouse, unsigned int rate);
};
#ifdef CONFIG_MOUSE_PS2_ELANTECH
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
