On 15-03-12 10:59 AM, Joe Perches wrote:
> On Thu, 2015-03-12 at 10:45 -0700, Jonathan Richardson wrote:
>> Add initial version of the Broadcom touchscreen driver.
>
> style trivia:
> (any of which could be fixed/improved/ignored later)
>
>> diff --git a/drivers/input/touchscreen/bcm_iproc_tsc.c b/drivers/input/touchscreen/bcm_iproc_tsc.c
> []
>> +static void ts_reg_dump(struct iproc_ts_priv *priv)
>> +{
>> + struct device *dev = &priv->pdev->dev;
>> +
>> + dev_dbg(dev, "regCtl1 = 0x%08x\n",
>> + readl(priv->regs + REGCTL1));
>
> The output case here generally isn't very important so
> sometimes it's better to use a macro like:
>
> #define dbg_reg(dev, priv, reg) \
> dev_dbg(dev, "%20s= 0x%08x\n", #reg, readl((priv)->regs + reg))
>
>> + dev_dbg(dev, "regCtl2 = 0x%08x\n",
>> + readl(priv->regs + REGCTL2));
>
> so these become
> dbg_reg(dev, priv, INTERRUPT_THRES);
> dbg_reg(dev, priv, INTERRUPT_MASK);
>
> etc...
>
> This style can reduce typo and copy/paste defects.
>
>> + dev_dbg(dev, "interrupt_Thres = 0x%08x\n",
>> + readl(priv->regs + INTERRUPT_THRES));
>> + dev_dbg(dev, "interrupt_Mask = 0x%08x\n",
>> + readl(priv->regs + INTERRUPT_MASK));
>> + dev_dbg(dev, "interrupt_Status = 0x%08x\n",
>> + readl(priv->regs + INTERRUPT_STATUS));
>> + dev_dbg(dev, "controller_Status = 0x%08x\n",
>> + readl(priv->regs + CONTROLLER_STATUS));
>> + dev_dbg(dev, "FIFO_Data = 0x%08x\n",
>> + readl(priv->regs + FIFO_DATA));
>> + dev_dbg(dev, "analog_Control = 0x%08x\n",
>> + readl(priv->regs + ANALOG_CONTROL));
>> + dev_dbg(dev, "aux_Data = 0x%08x\n",
>> + readl(priv->regs + AUX_DATA));
>> + dev_dbg(dev, "debounce_Cntr_Stat = 0x%08x\n",
>> + readl(priv->regs + DEBOUNCE_CNTR_STAT));
>> + dev_dbg(dev, "scan_Cntr_Stat = 0x%08x\n",
>> + readl(priv->regs + SCAN_CNTR_STAT));
>> + dev_dbg(dev, "rem_Cntr_Stat = 0x%08x\n",
>> + readl(priv->regs + REM_CNTR_STAT));
>> + dev_dbg(dev, "settling_Timer_Stat = 0x%08x\n",
>> + readl(priv->regs + SETTLING_TIMER_STAT));
>> + dev_dbg(dev, "spare_Reg = 0x%08x\n",
>> + readl(priv->regs + SPARE_REG));
>> + dev_dbg(dev, "soft_Bypass_Control = 0x%08x\n",
>> + readl(priv->regs + SOFT_BYPASS_CONTROL));
>> + dev_dbg(dev, "soft_Bypass_Data = 0x%08x\n",
>> + readl(priv->regs + SOFT_BYPASS_DATA));
>> +}
>
> []
>
>> +static int get_tsc_config(struct device_node *np, struct iproc_ts_priv *priv)
>> +{
>> + u32 val;
> []
>> + if (of_property_read_u32(np, "debounce_timeout", &val) >= 0) {
>> + if (val < 0 || val > 255) {
>
> testing u32 < 0 isn't necessary.
>
> Maybe it'd be better to emit the out of range value too
>
>> + dev_err(dev, "debounce_timeout must be [0-255]\n");
>
> dev_err(dev, "debounce_timeout (%u) must be [0-255]\n", val);
>
>
Thanks. I'll make the suggested changes and send out a new patch.
Jon
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
