Re: [PATCH v3][RFC] add raw video stream support for Samsung SUR40

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/07/2015 08:52 PM, Florian Echtler wrote:
> On 06.03.2015 12:47, Hans Verkuil wrote:
>> On 03/06/2015 12:24 PM, Florian Echtler wrote:
>>> On 21.02.2015 11:22, Hans Verkuil wrote:
>>>> On 02/20/2015 10:46 PM, Florian Echtler wrote:
>>>>> On 16.02.2015 12:40, Hans Verkuil wrote:
>>>>>> I prefer to dig into this a little bit more, as I don't really understand
>>>>>> it. Set the videobuf2-core debug level to 1 and see what the warnings are.
>>>>>> Since 'buf.qbuf' fails in v4l2-compliance, it's something in the VIDIOC_QBUF
>>>>>> sequence that returns an error, so you need to pinpoint that.
>>>>> OK, I don't currently have access to the hardware, but I will try this
>>>>> as soon as possible.
>>> Finally got a chance to try again with videobuf2-core.debug=1. Same
>>> result on 3.19 and 4.0-rc2, after running v4l2-compliance -s from
>>> today's master (full log attached, but important part is below):
>>>
>>> I'm not familiar enough with the inner workings of videobuf2 to make any
>>> sense of it, any new insights from you guys?
>>
>> Can you do:
>> echo 2 >/sys/class/video4linux/videoX/dev_debug
>> and run again?
>> That way I see the vb2 debug messages in related to the issued ioctls.
> See attachment, this is the full syslog output from one v4l2-compliance
> run on 4.0-rc2, with video0/dev_debug=2 and core.debug=1.
> 
>> And if you can also supply the v4l2-compliance -s output, just for
>> reference?
> Also attached for completeness, the important part is:
> 
> Streaming ioctls:
> 	test read/write: OK
> 	test MMAP: OK
> 		fail: v4l2-test-buffers.cpp(280): !g_timestamp().tv_sec &&
> !g_timestamp().tv_usec

Hmm, I don't think I saw this before.

Anyway, looking at the code I think I see at least one thing that is dubious
and that needs to be changed:

In sur40_process_video() you check for buffers at the start:

	if (list_empty(&sur40->buf_list))
		return;

Replace this with:

	if (!vb2_start_streaming_called(&sur40->queue))
		return;

This will wait until start_streaming was called before it starts processing
video (and start_streaming is only called if at least 3 buffers have been
queued).

Right now the first buffer can be returned without STREAMON actually having
been called. That's certainly wrong.

Whether that is the cause of this bug I do not know, but fix this first.

If this doesn't solve it, then please do another run but this time use

echo 10 >/sys/class/video4linux/videoX/dev_debug

so I see the (D)QBUF ioctls as well. Otherwise use the same procedure as
before.

Thanks!

	Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux