On Tue, 24 Feb 2015, Jaewon Kim wrote:
> This patch adds MAX77843 core/irq driver to support PMIC,
> MUIC(Micro USB Interface Controller), Charger, Fuel Gauge,
> LED and Haptic device.
>
> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
> Signed-off-by: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
> Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
> ---
> drivers/mfd/Kconfig | 14 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/max77843.c | 248 +++++++++++++++++++
> include/linux/mfd/max77843-private.h | 454 ++++++++++++++++++++++++++++++++++
> 4 files changed, 717 insertions(+)
> create mode 100644 drivers/mfd/max77843.c
> create mode 100644 include/linux/mfd/max77843-private.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 38356e3..f2fd5e5 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -455,6 +455,20 @@ config MFD_MAX77693
> additional drivers must be enabled in order to use the functionality
> of the device.
>
> +config MFD_MAX77843
> + bool "Maxim Semiconductor MAX77843 PMIC Support"
> + depends on I2C=y
> + select MFD_CORE
> + select REGMAP_I2C
> + select REGMAP_IRQ
> + help
> + Say yes here to add support for Maxim Semiconductor MAX77843.
> + This is companion Power Management IC with LEDs, Haptic, Charger,
> + Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip.
> + This driver provides common support for accessing the device;
> + additional drivers must be enabled in order to use the functionality
> + of the device.
> +
> config MFD_MAX8907
> tristate "Maxim Semiconductor MAX8907 PMIC Support"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 19f3d74..b8ac555 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -117,6 +117,7 @@ obj-$(CONFIG_MFD_DA9150) += da9150-core.o
> obj-$(CONFIG_MFD_MAX14577) += max14577.o
> obj-$(CONFIG_MFD_MAX77686) += max77686.o
> obj-$(CONFIG_MFD_MAX77693) += max77693.o
> +obj-$(CONFIG_MFD_MAX77843) += max77843.o
> obj-$(CONFIG_MFD_MAX8907) += max8907.o
> max8925-objs := max8925-core.o max8925-i2c.o
> obj-$(CONFIG_MFD_MAX8925) += max8925.o
> diff --git a/drivers/mfd/max77843.c b/drivers/mfd/max77843.c
> new file mode 100644
> index 0000000..2d8b3cc
> --- /dev/null
> +++ b/drivers/mfd/max77843.c
> @@ -0,0 +1,248 @@
> +/*
> + * max77843.c - MFD core driver for the Maxim MAX77843
Please remove the filename.
> + * Copyright (C) 2015 Samsung Electronics
> + * Author: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
> + * Author: Beomho Seo <beomho.seo@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/max77843-private.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +
> +static const struct mfd_cell max77843_devs[] = {
> + {
> + .name = "max77843-muic",
> + .of_compatible = "maxim,max77843-muic",
> + }, {
> + .name = "max77843-regulator",
> + .of_compatible = "maxim,max77843-regulator",
> + }, {
> + .name = "max77843-charger",
> + .of_compatible = "maxim,max77843-charger"
> + }, {
> + .name = "max77843-fuelgauge",
> + .of_compatible = "maxim,max77843-fuelgauge",
> + }, {
> + .name = "max77843-haptic",
> + .of_compatible = "maxim,max77843-haptic",
> + },
> +};
> +
> +static const struct regmap_config max77843_charger_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX77843_CHG_REG_END,
> +};
> +
> +static const struct regmap_config max77843_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX77843_SYS_REG_END,
> +};
> +
> +static const struct regmap_irq max77843_irqs[] = {
> + /* TOPSYS interrupts */
> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSUVLO_INT, },
> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSOVLO_INT, },
> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TSHDN_INT, },
> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TM_INT, },
> +};
> +
> +static const struct regmap_irq_chip max77843_irq_chip = {
> + .name = "max77843",
> + .status_base = MAX77843_SYS_REG_SYSINTSRC,
> + .mask_base = MAX77843_SYS_REG_SYSINTMASK,
> + .mask_invert = false,
> + .num_regs = 1,
> + .irqs = max77843_irqs,
> + .num_irqs = ARRAY_SIZE(max77843_irqs),
> +};
> +
> +/* Charger and Charger regulator use same regmap. */
> +static int max77843_chg_init(struct max77843 *max77843)
> +{
> + int ret;
> +
> + max77843->i2c_chg = i2c_new_dummy(max77843->i2c->adapter, I2C_ADDR_CHG);
> + if (!max77843->i2c_chg) {
> + dev_err(&max77843->i2c->dev,
> + "Cannot allocate I2C device for Charger\n");
> + return PTR_ERR(max77843->i2c_chg);
> + }
> + i2c_set_clientdata(max77843->i2c_chg, max77843);
> +
> + max77843->regmap_chg = devm_regmap_init_i2c(max77843->i2c_chg,
> + &max77843_charger_regmap_config);
> + if (IS_ERR(max77843->regmap_chg)) {
> + ret = PTR_ERR(max77843->regmap_chg);
> + goto err_chg_i2c;
> + }
> +
> + return 0;
> +
> +err_chg_i2c:
> + i2c_unregister_device(max77843->i2c_chg);
> +
> + return ret;
> +}
> +
> +static int max77843_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct max77843 *max77843;
> + unsigned int reg_data;
> + int ret;
> +
> + max77843 = devm_kzalloc(&i2c->dev, sizeof(*max77843), GFP_KERNEL);
> + if (!max77843)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(i2c, max77843);
> + max77843->dev = &i2c->dev;
> + max77843->i2c = i2c;
> + max77843->irq = i2c->irq;
> +
> + max77843->regmap = devm_regmap_init_i2c(i2c,
> + &max77843_regmap_config);
> + if (IS_ERR(max77843->regmap)) {
> + dev_err(&i2c->dev, "Failed to allocate topsys register map\n");
> + return PTR_ERR(max77843->regmap);
> + }
> +
> + ret = regmap_add_irq_chip(max77843->regmap, max77843->irq,
> + IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
> + 0, &max77843_irq_chip, &max77843->irq_data);
> + if (ret) {
> + dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n");
> + return ret;
> + }
> +
> + ret = regmap_read(max77843->regmap,
> + MAX77843_SYS_REG_PMICID, ®_data);
> + if (ret < 0) {
> + dev_err(&i2c->dev, "Failed to read PMIC ID\n");
> + goto err_pmic_id;
> + }
> + dev_info(&i2c->dev, "device ID: 0x%x\n", reg_data);
> +
> + ret = max77843_chg_init(max77843);
> + if (ret) {
> + dev_err(&i2c->dev, "Failed to init Charger\n");
> + goto err_pmic_id;
> + }
> +
> + ret = regmap_update_bits(max77843->regmap,
> + MAX77843_SYS_REG_INTSRCMASK,
> + MAX77843_INTSRC_MASK_MASK,
> + (unsigned int)~MAX77843_INTSRC_MASK_MASK);
> + if (ret < 0) {
> + dev_err(&i2c->dev, "Failed to unmask interrupt source\n");
> + goto err_pmic_id;
> + }
> +
> + ret = mfd_add_devices(max77843->dev, -1, max77843_devs,
> + ARRAY_SIZE(max77843_devs), NULL, 0, NULL);
The tabbing in this file is all over the place. Sometimes you match
up to the '(', sometimes you don't. I would prefer it if you matched
with the opening parenthesis in all cases.
> + if (ret < 0) {
> + dev_err(&i2c->dev, "Failed to add mfd device\n");
> + goto err_pmic_id;
> + }
> +
> + device_init_wakeup(max77843->dev, 1);
device_init_wakeup's second argument is a bool. 1 is not a bool.
Please use 'true' or 'false'.
> + return 0;
> +
> +err_pmic_id:
> + regmap_del_irq_chip(max77843->irq, max77843->irq_data);
> +
> + return ret;
> +}
> +
> +static int max77843_remove(struct i2c_client *i2c)
> +{
> + struct max77843 *max77843 = i2c_get_clientdata(i2c);
> +
> + mfd_remove_devices(max77843->dev);
> +
> + regmap_del_irq_chip(max77843->irq, max77843->irq_data);
> +
> + i2c_unregister_device(max77843->i2c_chg);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id max77843_dt_match[] = {
> + { .compatible = "maxim,max77843", },
> + { /* sentinel */ },
> +};
> +
> +static const struct i2c_device_id max77843_id[] = {
> + { "max77843", },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(i2c, max77843_id);
There's really no need for these /* sentinel */ comments. We all know
that they're required and what they do now.
> +static int __maybe_unused max77843_suspend(struct device *dev)
> +{
> + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
> + struct max77843 *max77843 = i2c_get_clientdata(i2c);
> +
> + if (device_may_wakeup(dev))
> + enable_irq_wake(max77843->irq);
> + disable_irq(max77843->irq);
Don't you want to disable the IRQs first?
> + return 0;
> +}
> +
> +static int __maybe_unused max77843_resume(struct device *dev)
> +{
> + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
> + struct max77843 *max77843 = i2c_get_clientdata(i2c);
> +
> + if (device_may_wakeup(dev))
> + disable_irq_wake(max77843->irq);
> + enable_irq(max77843->irq);
> +
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(max77843_pm, max77843_suspend, max77843_resume);
> +
> +static struct i2c_driver max77843_i2c_driver = {
> + .driver = {
> + .name = "max77843",
> + .pm = &max77843_pm,
> + .of_match_table = max77843_dt_match,
> + },
> + .probe = max77843_probe,
> + .remove = max77843_remove,
> + .id_table = max77843_id,
> +};
> +
> +static int __init max77843_i2c_init(void)
> +{
> + return i2c_add_driver(&max77843_i2c_driver);
> +}
> +subsys_initcall(max77843_i2c_init);
> +
> +static void __exit max77843_i2c_exit(void)
> +{
> + i2c_del_driver(&max77843_i2c_driver);
> +}
> +module_exit(max77843_i2c_exit);
> +
> +MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>");
> +MODULE_AUTHOR("Beomho Seo <beomho.seo@xxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Maxim MAX77843 multi-function core driver");
> +MODULE_LICENSE("GPL");
You go to the trouble of providing all of these module helpers, but
this driver can not be used as a module.
> diff --git a/include/linux/mfd/max77843-private.h b/include/linux/mfd/max77843-private.h
> new file mode 100644
> index 0000000..c314da9
> --- /dev/null
> +++ b/include/linux/mfd/max77843-private.h
> @@ -0,0 +1,454 @@
> +/*
> + * max77843-private.h - Common variables for the Maxim MAX77843 driver
Please remove the filename.
> + * Copyright (C) 2015 Samsung Electronics
> + * Author: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
> + * Author: Beomho Seo <beomho.seo@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef __MAX77843_PRIVATE_H_
> +#define __MAX77843_PRIVATE_H_
> +
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +
> +#define I2C_ADDR_TOPSYS (0xCC >> 1)
> +#define I2C_ADDR_CHG (0xD2 >> 1)
> +#define I2C_ADDR_FG (0x6C >> 1)
> +#define I2C_ADDR_MUIC (0x4A >> 1)
> +
> +/* Topsys, Haptic and LED registers */
> +enum max77843_sys_reg {
> + MAX77843_SYS_REG_PMICID = 0x00,
> + MAX77843_SYS_REG_PMICREV = 0x01,
> + MAX77843_SYS_REG_MAINCTRL1 = 0x02,
> + MAX77843_SYS_REG_INTSRC = 0x22,
> + MAX77843_SYS_REG_INTSRCMASK = 0x23,
> + MAX77843_SYS_REG_SYSINTSRC = 0x24,
> + MAX77843_SYS_REG_SYSINTMASK = 0x26,
> + MAX77843_SYS_REG_TOPSYS_STAT = 0x28,
> + MAX77843_SYS_REG_SAFEOUTCTRL = 0xC6,
> +
> + MAX77843_SYS_REG_END,
> +};
> +
> +enum max77843_haptic_reg {
> + MAX77843_HAP_REG_MCONFIG = 0x10,
> +
> + MAX77843_HAP_REG_END,
> +};
> +
> +enum max77843_led_reg {
> + MAX77843_LED_REG_LEDEN = 0x30,
> + MAX77843_LED_REG_LED0BRT = 0x31,
> + MAX77843_LED_REG_LED1BRT = 0x32,
> + MAX77843_LED_REG_LED2BRT = 0x33,
> + MAX77843_LED_REG_LED3BRT = 0x34,
> + MAX77843_LED_REG_LEDBLNK = 0x38,
> + MAX77843_LED_REG_LEDRAMP = 0x36,
> +
> + MAX77843_LED_REG_END,
> +};
> +
> +/* Charger registers */
> +enum max77843_charger_reg {
> + MAX77843_CHG_REG_CHG_INT = 0xB0,
> + MAX77843_CHG_REG_CHG_INT_MASK = 0xB1,
> + MAX77843_CHG_REG_CHG_INT_OK = 0xB2,
> + MAX77843_CHG_REG_CHG_DTLS_00 = 0xB3,
> + MAX77843_CHG_REG_CHG_DTLS_01 = 0xB4,
> + MAX77843_CHG_REG_CHG_DTLS_02 = 0xB5,
> + MAX77843_CHG_REG_CHG_CNFG_00 = 0xB7,
> + MAX77843_CHG_REG_CHG_CNFG_01 = 0xB8,
> + MAX77843_CHG_REG_CHG_CNFG_02 = 0xB9,
> + MAX77843_CHG_REG_CHG_CNFG_03 = 0xBA,
> + MAX77843_CHG_REG_CHG_CNFG_04 = 0xBB,
> + MAX77843_CHG_REG_CHG_CNFG_06 = 0xBD,
> + MAX77843_CHG_REG_CHG_CNFG_07 = 0xBE,
> + MAX77843_CHG_REG_CHG_CNFG_09 = 0xC0,
> + MAX77843_CHG_REG_CHG_CNFG_10 = 0xC1,
> + MAX77843_CHG_REG_CHG_CNFG_11 = 0xC2,
> + MAX77843_CHG_REG_CHG_CNFG_12 = 0xC3,
> +
> + MAX77843_CHG_REG_END,
> +};
> +
> +/* Fuel gauge registers */
> +enum max77843_fuelgauge {
> + MAX77843_FG_REG_STATUS = 0x00,
> + MAX77843_FG_REG_VALRT_TH = 0x01,
> + MAX77843_FG_REG_TALRT_TH = 0x02,
> + MAX77843_FG_REG_SALRT_TH = 0x03,
> + MAX77843_FG_RATE_AT_RATE = 0x04,
> + MAX77843_FG_REG_REMCAP_REP = 0x05,
> + MAX77843_FG_REG_SOCREP = 0x06,
> + MAX77843_FG_REG_AGE = 0x07,
> + MAX77843_FG_REG_TEMP = 0x08,
> + MAX77843_FG_REG_VCELL = 0x09,
> + MAX77843_FG_REG_CURRENT = 0x0A,
> + MAX77843_FG_REG_AVG_CURRENT = 0x0B,
> + MAX77843_FG_REG_SOCMIX = 0x0D,
> + MAX77843_FG_REG_SOCAV = 0x0E,
> + MAX77843_FG_REG_REMCAP_MIX = 0x0F,
> + MAX77843_FG_REG_FULLCAP = 0x10,
> + MAX77843_FG_REG_AVG_TEMP = 0x16,
> + MAX77843_FG_REG_CYCLES = 0x17,
> + MAX77843_FG_REG_AVG_VCELL = 0x19,
> + MAX77843_FG_REG_CONFIG = 0x1D,
> + MAX77843_FG_REG_REMCAP_AV = 0x1F,
> + MAX77843_FG_REG_FULLCAP_NOM = 0x23,
> + MAX77843_FG_REG_MISCCFG = 0x2B,
> + MAX77843_FG_REG_RCOMP = 0x38,
> + MAX77843_FG_REG_FSTAT = 0x3D,
> + MAX77843_FG_REG_DQACC = 0x45,
> + MAX77843_FG_REG_DPACC = 0x46,
> + MAX77843_FG_REG_OCV = 0xEE,
> + MAX77843_FG_REG_VFOCV = 0xFB,
> + MAX77843_FG_SOCVF = 0xFF,
> +
> + MAX77843_FG_END,
> +};
> +
> +/* MUIC registers */
> +enum max77843_muic_reg {
> + MAX77843_MUIC_REG_ID = 0x00,
> + MAX77843_MUIC_REG_INT1 = 0x01,
> + MAX77843_MUIC_REG_INT2 = 0x02,
> + MAX77843_MUIC_REG_INT3 = 0x03,
> + MAX77843_MUIC_REG_STATUS1 = 0x04,
> + MAX77843_MUIC_REG_STATUS2 = 0x05,
> + MAX77843_MUIC_REG_STATUS3 = 0x06,
> + MAX77843_MUIC_REG_INTMASK1 = 0x07,
> + MAX77843_MUIC_REG_INTMASK2 = 0x08,
> + MAX77843_MUIC_REG_INTMASK3 = 0x09,
> + MAX77843_MUIC_REG_CDETCTRL1 = 0x0A,
> + MAX77843_MUIC_REG_CDETCTRL2 = 0x0B,
> + MAX77843_MUIC_REG_CONTROL1 = 0x0C,
> + MAX77843_MUIC_REG_CONTROL2 = 0x0D,
> + MAX77843_MUIC_REG_CONTROL3 = 0x0E,
> + MAX77843_MUIC_REG_CONTROL4 = 0x16,
> + MAX77843_MUIC_REG_HVCONTROL1 = 0x17,
> + MAX77843_MUIC_REG_HVCONTROL2 = 0x18,
> +
> + MAX77843_MUIC_REG_END,
> +};
> +
> +enum max77843_irq {
> + /* Topsys: SYSTEM */
> + MAX77843_SYS_IRQ_SYSINTSRC_SYSUVLO_INT,
> + MAX77843_SYS_IRQ_SYSINTSRC_SYSOVLO_INT,
> + MAX77843_SYS_IRQ_SYSINTSRC_TSHDN_INT,
> + MAX77843_SYS_IRQ_SYSINTSRC_TM_INT,
> +
> + /* Charger: CHG_INT */
> + MAX77843_CHG_IRQ_CHG_INT_BYP_I,
> + MAX77843_CHG_IRQ_CHG_INT_BATP_I,
> + MAX77843_CHG_IRQ_CHG_INT_BAT_I,
> + MAX77843_CHG_IRQ_CHG_INT_CHG_I,
> + MAX77843_CHG_IRQ_CHG_INT_WCIN_I,
> + MAX77843_CHG_IRQ_CHG_INT_CHGIN_I,
> + MAX77843_CHG_IRQ_CHG_INT_AICL_I,
> +
> + MAX77843_IRQ_NUM,
> +};
> +
> +enum max77843_irq_muic {
> + /* MUIC: INT1 */
> + MAX77843_MUIC_IRQ_INT1_ADC,
> + MAX77843_MUIC_IRQ_INT1_ADCERROR,
> + MAX77843_MUIC_IRQ_INT1_ADC1K,
> +
> + /* MUIC: INT2 */
> + MAX77843_MUIC_IRQ_INT2_CHGTYP,
> + MAX77843_MUIC_IRQ_INT2_CHGDETRUN,
> + MAX77843_MUIC_IRQ_INT2_DCDTMR,
> + MAX77843_MUIC_IRQ_INT2_DXOVP,
> + MAX77843_MUIC_IRQ_INT2_VBVOLT,
> +
> + /* MUIC: INT3 */
> + MAX77843_MUIC_IRQ_INT3_VBADC,
> + MAX77843_MUIC_IRQ_INT3_VDNMON,
> + MAX77843_MUIC_IRQ_INT3_DNRES,
> + MAX77843_MUIC_IRQ_INT3_MPNACK,
> + MAX77843_MUIC_IRQ_INT3_MRXBUFOW,
> + MAX77843_MUIC_IRQ_INT3_MRXTRF,
> + MAX77843_MUIC_IRQ_INT3_MRXPERR,
> + MAX77843_MUIC_IRQ_INT3_MRXRDY,
> +
> + MAX77843_MUIC_IRQ_NUM,
> +};
> +
> +/* MAX77843 interrupts */
> +#define MAX77843_SYS_IRQ_SYSUVLO_INT BIT(0)
> +#define MAX77843_SYS_IRQ_SYSOVLO_INT BIT(1)
> +#define MAX77843_SYS_IRQ_TSHDN_INT BIT(2)
> +#define MAX77843_SYS_IRQ_TM_INT BIT(3)
> +
> +/* MAX77843 MAINCTRL1 register */
> +#define MAINCTRL1_BIASEN_SHIFT 7
> +#define MAX77843_MAINCTRL1_BIASEN_MASK BIT(MAINCTRL1_BIASEN_SHIFT)
> +
> +/* MAX77843 MCONFIG register */
> +#define MCONFIG_MODE_SHIFT 7
> +#define MCONFIG_MEN_SHIFT 6
> +#define MCONFIG_PDIV_SHIFT 0
> +
> +#define MAX77843_MCONFIG_MODE_MASK BIT(MCONFIG_MODE_SHIFT)
> +#define MAX77843_MCONFIG_MEN_MASK BIT(MCONFIG_MEN_SHIFT)
> +#define MAX77843_MCONFIG_PDIV_MASK (0x3 << MCONFIG_PDIV_SHIFT)
> +
> +/* Max77843 charger insterrupts */
> +#define MAX77843_CHG_BYP_I BIT(0)
> +#define MAX77843_CHG_BATP_I BIT(2)
> +#define MAX77843_CHG_BAT_I BIT(3)
> +#define MAX77843_CHG_CHG_I BIT(4)
> +#define MAX77843_CHG_WCIN_I BIT(5)
> +#define MAX77843_CHG_CHGIN_I BIT(6)
> +#define MAX77843_CHG_AICL_I BIT(7)
> +
> +/* MAX77843 CHG_INT_OK register */
> +#define MAX77843_CHG_BYP_OK BIT(0)
> +#define MAX77843_CHG_BATP_OK BIT(2)
> +#define MAX77843_CHG_BAT_OK BIT(3)
> +#define MAX77843_CHG_CHG_OK BIT(4)
> +#define MAX77843_CHG_WCIN_OK BIT(5)
> +#define MAX77843_CHG_CHGIN_OK BIT(6)
> +#define MAX77843_CHG_AICL_OK BIT(7)
> +
> +/* MAX77843 CHG_DETAILS_00 register */
> +#define MAX77843_CHG_BAT_DTLS BIT(0)
> +
> +/* MAX77843 CHG_DETAILS_01 register */
> +#define MAX77843_CHG_DTLS_MASK 0x0f
> +#define MAX77843_CHG_PQ_MODE 0x00
> +#define MAX77843_CHG_CC_MODE 0x01
> +#define MAX77843_CHG_CV_MODE 0x02
> +#define MAX77843_CHG_TO_MODE 0x03
> +#define MAX77843_CHG_DO_MODE 0x04
> +#define MAX77843_CHG_HT_MODE 0x05
> +#define MAX77843_CHG_TF_MODE 0x06
> +#define MAX77843_CHG_TS_MODE 0x07
> +#define MAX77843_CHG_OFF_MODE 0x08
> +
> +#define MAX77843_CHG_BAT_DTLS_MASK 0xf0
> +#define MAX77843_CHG_NO_BAT (0x00 << 4)
> +#define MAX77843_CHG_LOW_VOLT_BAT (0x01 << 4)
> +#define MAX77843_CHG_LONG_BAT_TIME (0x02 << 4)
> +#define MAX77843_CHG_OK_BAT (0x03 << 4)
> +#define MAX77843_CHG_OK_LOW_VOLT_BAT (0x04 << 4)
> +#define MAX77843_CHG_OVER_VOLT_BAT (0x05 << 4)
> +#define MAX77843_CHG_OVER_CURRENT_BAT (0x06 << 4)
> +
> +/* MAX77843 CHG_CNFG_00 register */
> +#define MAX77843_CHG_DISABLE 0x00
> +#define MAX77843_CHG_ENABLE 0x05
> +#define MAX77843_CHG_MASK 0x01
> +#define MAX77843_CHG_BUCK_MASK 0x04
> +
> +/* MAX77843 CHG_CNFG_01 register */
> +#define MAX77843_CHG_RESTART_THRESHOLD_100 0x00
> +#define MAX77843_CHG_RESTART_THRESHOLD_150 0x10
> +#define MAX77843_CHG_RESTART_THRESHOLD_200 0x20
> +#define MAX77843_CHG_RESTART_THRESHOLD_DISABLE 0x30
> +
> +/* MAX77843 CHG_CNFG_02 register */
> +#define MAX77843_CHG_FAST_CHG_CURRENT_MIN 100000
> +#define MAX77843_CHG_FAST_CHG_CURRENT_MAX 3150000
> +#define MAX77843_CHG_FAST_CHG_CURRENT_STEP 50000
> +#define MAX77843_CHG_FAST_CHG_CURRENT_MASK 0x3f
> +#define MAX77843_CHG_OTG_ILIMIT_500 (0x00 << 6)
> +#define MAX77843_CHG_OTG_ILIMIT_900 (0x01 << 6)
> +#define MAX77843_CHG_OTG_ILIMIT_1200 (0x02 << 6)
> +#define MAX77843_CHG_OTG_ILIMIT_1500 (0x03 << 6)
> +#define MAX77843_CHG_OTG_ILIMIT_MASK 0xc0
> +
> +/* MAX77843 CHG_CNFG_03 register */
> +#define MAX77843_CHG_TOP_OFF_CURRENT_MIN 125000
> +#define MAX77843_CHG_TOP_OFF_CURRENT_MAX 650000
> +#define MAX77843_CHG_TOP_OFF_CURRENT_STEP 75000
> +#define MAX77843_CHG_TOP_OFF_CURRENT_MASK 0x07
> +
> +/* MAX77843 CHG_CNFG_06 register */
> +#define MAX77843_CHG_WRITE_CAP_BLOCK 0x10
> +#define MAX77843_CHG_WRITE_CAP_UNBLOCK 0x0C
> +
> +/* MAX77843_CHG_CNFG_09_register */
> +#define MAX77843_CHG_INPUT_CURRENT_LIMIT_MIN 100000
> +#define MAX77843_CHG_INPUT_CURRENT_LIMIT_MAX 4000000
> +#define MAX77843_CHG_INPUT_CURRENT_LIMIT_REF 3367000
> +#define MAX77843_CHG_INPUT_CURRENT_LIMIT_STEP 33000
> +
> +#define MAX77843_MUIC_ADC BIT(0)
> +#define MAX77843_MUIC_ADCERROR BIT(2)
> +#define MAX77843_MUIC_ADC1K BIT(3)
> +
> +#define MAX77843_MUIC_CHGTYP BIT(0)
> +#define MAX77843_MUIC_CHGDETRUN BIT(1)
> +#define MAX77843_MUIC_DCDTMR BIT(2)
> +#define MAX77843_MUIC_DXOVP BIT(3)
> +#define MAX77843_MUIC_VBVOLT BIT(4)
> +
> +#define MAX77843_MUIC_VBADC BIT(0)
> +#define MAX77843_MUIC_VDNMON BIT(1)
> +#define MAX77843_MUIC_DNRES BIT(2)
> +#define MAX77843_MUIC_MPNACK BIT(3)
> +#define MAX77843_MUIC_MRXBUFOW BIT(4)
> +#define MAX77843_MUIC_MRXTRF BIT(5)
> +#define MAX77843_MUIC_MRXPERR BIT(6)
> +#define MAX77843_MUIC_MRXRDY BIT(7)
> +
> +/* MAX77843 INTSRCMASK register */
> +#define MAX77843_INTSRCMASK_CHGR 0
> +#define MAX77843_INTSRCMASK_SYS 1
> +#define MAX77843_INTSRCMASK_FG 2
> +#define MAX77843_INTSRCMASK_MUIC 3
> +
> +#define MAX77843_INTSRCMASK_CHGR_MASK BIT(MAX77843_INTSRCMASK_CHGR)
> +#define MAX77843_INTSRCMASK_SYS_MASK BIT(MAX77843_INTSRCMASK_SYS)
> +#define MAX77843_INTSRCMASK_FG_MASK BIT(MAX77843_INTSRCMASK_FG)
> +#define MAX77843_INTSRCMASK_MUIC_MASK BIT(MAX77843_INTSRCMASK_MUIC)
> +
> +#define MAX77843_INTSRC_MASK_MASK \
> + (MAX77843_INTSRCMASK_MUIC_MASK | MAX77843_INTSRCMASK_FG_MASK | \
> + MAX77843_INTSRCMASK_SYS_MASK | MAX77843_INTSRCMASK_CHGR_MASK)
> +
> +/* MAX77843 STATUS register*/
> +#define STATUS1_ADC_SHIFT 0
> +#define STATUS1_ADCERROR_SHIFT 6
> +#define STATUS1_ADC1K_SHIFT 7
> +#define STATUS2_CHGTYP_SHIFT 0
> +#define STATUS2_CHGDETRUN_SHIFT 3
> +#define STATUS2_DCDTMR_SHIFT 4
> +#define STATUS2_DXOVP_SHIFT 5
> +#define STATUS2_VBVOLT_SHIFT 6
> +#define STATUS3_VBADC_SHIFT 0
> +#define STATUS3_VDNMON_SHIFT 4
> +#define STATUS3_DNRES_SHIFT 5
> +#define STATUS3_MPNACK_SHIFT 6
> +
> +#define MAX77843_MUIC_STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT)
> +#define MAX77843_MUIC_STATUS1_ADCERROR_MASK BIT(STATUS1_ADCERROR_SHIFT)
> +#define MAX77843_MUIC_STATUS1_ADC1K_MASK BIT(STATUS1_ADC1K_SHIFT)
> +#define MAX77843_MUIC_STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT)
> +#define MAX77843_MUIC_STATUS2_CHGDETRUN_MASK BIT(STATUS2_CHGDETRUN_SHIFT)
> +#define MAX77843_MUIC_STATUS2_DCDTMR_MASK BIT(STATUS2_DCDTMR_SHIFT)
> +#define MAX77843_MUIC_STATUS2_DXOVP_MASK BIT(STATUS2_DXOVP_SHIFT)
> +#define MAX77843_MUIC_STATUS2_VBVOLT_MASK BIT(STATUS2_VBVOLT_SHIFT)
> +#define MAX77843_MUIC_STATUS3_VBADC_MASK (0xf << STATUS3_VBADC_SHIFT)
> +#define MAX77843_MUIC_STATUS3_VDNMON_MASK BIT(STATUS3_VDNMON_SHIFT)
> +#define MAX77843_MUIC_STATUS3_DNRES_MASK BIT(STATUS3_DNRES_SHIFT)
> +#define MAX77843_MUIC_STATUS3_MPNACK_MASK BIT(STATUS3_MPNACK_SHIFT)
> +
> +/* MAX77843 CONTROL register */
> +#define CONTROL1_COMP1SW_SHIFT 0
> +#define CONTROL1_COMP2SW_SHIFT 3
> +#define CONTROL1_IDBEN_SHIFT 7
> +#define CONTROL2_LOWPWR_SHIFT 0
> +#define CONTROL2_ADCEN_SHIFT 1
> +#define CONTROL2_CPEN_SHIFT 2
> +#define CONTROL2_ACC_DET_SHIFT 5
> +#define CONTROL2_USBCPINT_SHIFT 6
> +#define CONTROL2_RCPS_SHIFT 7
> +#define CONTROL3_JIGSET_SHIFT 0
> +#define CONTROL4_ADCDBSET_SHIFT 0
> +#define CONTROL4_USBAUTO_SHIFT 4
> +#define CONTROL4_FCTAUTO_SHIFT 5
> +#define CONTROL4_ADCMODE_SHIFT 6
> +
> +#define MAX77843_MUIC_CONTROL1_COMP1SW_MASK (0x7 << CONTROL1_COMP1SW_SHIFT)
> +#define MAX77843_MUIC_CONTROL1_COMP2SW_MASK (0x7 << CONTROL1_COMP2SW_SHIFT)
> +#define MAX77843_MUIC_CONTROL1_IDBEN_MASK BIT(CONTROL1_IDBEN_SHIFT)
> +#define MAX77843_MUIC_CONTROL2_LOWPWR_MASK BIT(CONTROL2_LOWPWR_SHIFT)
> +#define MAX77843_MUIC_CONTROL2_ADCEN_MASK BIT(CONTROL2_ADCEN_SHIFT)
> +#define MAX77843_MUIC_CONTROL2_CPEN_MASK BIT(CONTROL2_CPEN_SHIFT)
> +#define MAX77843_MUIC_CONTROL2_ACC_DET_MASK BIT(CONTROL2_ACC_DET_SHIFT)
> +#define MAX77843_MUIC_CONTROL2_USBCPINT_MASK BIT(CONTROL2_USBCPINT_SHIFT)
> +#define MAX77843_MUIC_CONTROL2_RCPS_MASK BIT(CONTROL2_RCPS_SHIFT)
> +#define MAX77843_MUIC_CONTROL3_JIGSET_MASK (0x3 << CONTROL3_JIGSET_SHIFT)
> +#define MAX77843_MUIC_CONTROL4_ADCDBSET_MASK (0x3 << CONTROL4_ADCDBSET_SHIFT)
> +#define MAX77843_MUIC_CONTROL4_USBAUTO_MASK BIT(CONTROL4_USBAUTO_SHIFT)
> +#define MAX77843_MUIC_CONTROL4_FCTAUTO_MASK BIT(CONTROL4_FCTAUTO_SHIFT)
> +#define MAX77843_MUIC_CONTROL4_ADCMODE_MASK (0x3 << CONTROL4_ADCMODE_SHIFT)
> +
> +/* MAX77843 switch port */
> +#define COM_OPEN 0
> +#define COM_USB 1
> +#define COM_AUDIO 2
> +#define COM_UART 3
> +#define COM_AUX_USB 4
> +#define COM_AUX_UART 5
> +
> +#define CONTROL1_COM_SW \
> + ((MAX77843_MUIC_CONTROL1_COMP1SW_MASK | \
> + MAX77843_MUIC_CONTROL1_COMP2SW_MASK))
> +
> +#define CONTROL1_SW_OPEN \
> + ((COM_OPEN << CONTROL1_COMP1SW_SHIFT | \
> + COM_OPEN << CONTROL1_COMP2SW_SHIFT))
> +#define CONTROL1_SW_USB \
> + ((COM_USB << CONTROL1_COMP1SW_SHIFT | \
> + COM_USB << CONTROL1_COMP2SW_SHIFT))
> +#define CONTROL1_SW_AUDIO \
> + ((COM_AUDIO << CONTROL1_COMP1SW_SHIFT | \
> + COM_AUDIO << CONTROL1_COMP2SW_SHIFT))
> +#define CONTROL1_SW_UART \
> + ((COM_UART << CONTROL1_COMP1SW_SHIFT | \
> + COM_UART << CONTROL1_COMP2SW_SHIFT))
> +#define CONTROL1_SW_AUX_USB \
> + ((COM_AUX_USB << CONTROL1_COMP1SW_SHIFT | \
> + COM_AUX_USB << CONTROL1_COMP2SW_SHIFT))
> +#define CONTROL1_SW_AUX_UART \
> + ((COM_AUX_UART << CONTROL1_COMP1SW_SHIFT | \
> + COM_AUX_UART << CONTROL1_COMP2SW_SHIFT))
> +
> +#define MAX77843_DISABLE 0
> +#define MAX77843_ENABLE 1
> +
> +#define CONTROL4_AUTO_DISABLE \
> + ((MAX77843_DISABLE << CONTROL4_USBAUTO_SHIFT) | \
> + (MAX77843_DISABLE << CONTROL4_FCTAUTO_SHIFT))
> +#define CONTROL4_AUTO_ENABLE \
> + ((MAX77843_ENABLE << CONTROL4_USBAUTO_SHIFT) | \
> + (MAX77843_ENABLE << CONTROL4_FCTAUTO_SHIFT))
> +
> +/* MAX77843 SAFEOUT LDO Control register */
> +#define SAFEOUTCTRL_SAFEOUT1_SHIFT 0
> +#define SAFEOUTCTRL_SAFEOUT2_SHIFT 2
> +#define SAFEOUTCTRL_ENSAFEOUT1_SHIFT 6
> +#define SAFEOUTCTRL_ENSAFEOUT2_SHIFT 7
> +
> +#define MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT1 \
> + BIT(SAFEOUTCTRL_ENSAFEOUT1_SHIFT)
> +#define MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT2 \
> + BIT(SAFEOUTCTRL_ENSAFEOUT2_SHIFT)
> +#define MAX77843_REG_SAFEOUTCTRL_SAFEOUT1_MASK \
> + (0x3 << SAFEOUTCTRL_SAFEOUT1_SHIFT)
> +#define MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK \
> + (0x3 << SAFEOUTCTRL_SAFEOUT2_SHIFT)
> +
> +struct max77843 {
> + struct device *dev;
> +
> + struct i2c_client *i2c;
> + struct i2c_client *i2c_chg;
> + struct i2c_client *i2c_fuel;
> + struct i2c_client *i2c_muic;
> +
> + struct regmap *regmap;
> + struct regmap *regmap_chg;
> + struct regmap *regmap_fuel;
> + struct regmap *regmap_muic;
> +
> + struct regmap_irq_chip_data *irq_data;
> + struct regmap_irq_chip_data *irq_data_chg;
> + struct regmap_irq_chip_data *irq_data_fuel;
> + struct regmap_irq_chip_data *irq_data_muic;
> +
> + int irq;
> +};
> +#endif /* __MAX77843_H__ */
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
