Re: [PATCH v2 3/3] bfin_rotary: replace bfin specific MMR function with generic IO function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ping again.

On Wed, Jan 14, 2015 at 4:54 PM, Sonic Zhang <sonic.adi@xxxxxxxxx> wrote:
> From: Sonic Zhang <sonic.zhang@xxxxxxxxxx>
>
> - use readw and writew to access rotary MMRs
> - remap rotary register physical address into kernel space in probe
>
> v2-changes:
> - replace kzalloc with devm_kzalloc
> - replace request_irq with devm_request_irq
> - remove memory free and irq free from the device remove function
>
> Signed-off-by: Sonic Zhang <sonic.zhang@xxxxxxxxxx>
> ---
>  arch/blackfin/mach-bf527/boards/ad7160eval.c |    5 ++
>  arch/blackfin/mach-bf527/boards/ezkit.c      |    5 ++
>  arch/blackfin/mach-bf548/boards/ezkit.c      |    5 ++
>  arch/blackfin/mach-bf609/boards/ezkit.c      |    5 ++
>  drivers/input/misc/bfin_rotary.c             |  113 +++++++++++++++-----------
>  5 files changed, 87 insertions(+), 46 deletions(-)
>
> diff --git a/arch/blackfin/mach-bf527/boards/ad7160eval.c b/arch/blackfin/mach-bf527/boards/ad7160eval.c
> index 029a050..68f2a8a 100644
> --- a/arch/blackfin/mach-bf527/boards/ad7160eval.c
> +++ b/arch/blackfin/mach-bf527/boards/ad7160eval.c
> @@ -688,6 +688,11 @@ static struct bfin_rotary_platform_data bfin_rotary_data = {
>
>  static struct resource bfin_rotary_resources[] = {
>         {
> +               .start = CNT_CONFIG,
> +               .end   = CNT_CONFIG + 0xff,
> +               .flags = IORESOURCE_MEM,
> +       },
> +       {
>                 .start = IRQ_CNT,
>                 .end = IRQ_CNT,
>                 .flags = IORESOURCE_IRQ,
> diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
> index cc80c5b..d4219e8 100644
> --- a/arch/blackfin/mach-bf527/boards/ezkit.c
> +++ b/arch/blackfin/mach-bf527/boards/ezkit.c
> @@ -1114,6 +1114,11 @@ static struct bfin_rotary_platform_data bfin_rotary_data = {
>
>  static struct resource bfin_rotary_resources[] = {
>         {
> +               .start = CNT_CONFIG,
> +               .end   = CNT_CONFIG + 0xff,
> +               .flags = IORESOURCE_MEM,
> +       },
> +       {
>                 .start = IRQ_CNT,
>                 .end = IRQ_CNT,
>                 .flags = IORESOURCE_IRQ,
> diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
> index 0b68781..aaee1af 100644
> --- a/arch/blackfin/mach-bf548/boards/ezkit.c
> +++ b/arch/blackfin/mach-bf548/boards/ezkit.c
> @@ -181,6 +181,11 @@ static struct bfin_rotary_platform_data bfin_rotary_data = {
>
>  static struct resource bfin_rotary_resources[] = {
>         {
> +               .start = CNT_CONFIG,
> +               .end   = CNT_CONFIG + 0xff,
> +               .flags = IORESOURCE_MEM,
> +       },
> +       {
>                 .start = IRQ_CNT,
>                 .end = IRQ_CNT,
>                 .flags = IORESOURCE_IRQ,
> diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c
> index 4ac72c6..57ce0a8 100644
> --- a/arch/blackfin/mach-bf609/boards/ezkit.c
> +++ b/arch/blackfin/mach-bf609/boards/ezkit.c
> @@ -96,6 +96,11 @@ static struct bfin_rotary_platform_data bfin_rotary_data = {
>
>  static struct resource bfin_rotary_resources[] = {
>         {
> +               .start = CNT_CONFIG,
> +               .end   = CNT_CONFIG + 0xff,
> +               .flags = IORESOURCE_MEM,
> +       },
> +       {
>                 .start = IRQ_CNT,
>                 .end = IRQ_CNT,
>                 .flags = IORESOURCE_IRQ,
> diff --git a/drivers/input/misc/bfin_rotary.c b/drivers/input/misc/bfin_rotary.c
> index dd62fc9..83a69bc 100644
> --- a/drivers/input/misc/bfin_rotary.c
> +++ b/drivers/input/misc/bfin_rotary.c
> @@ -7,6 +7,7 @@
>
>  #include <linux/module.h>
>  #include <linux/interrupt.h>
> +#include <linux/io.h>
>  #include <linux/irq.h>
>  #include <linux/pm.h>
>  #include <linux/platform_device.h>
> @@ -16,8 +17,18 @@
>
>  #include <asm/portmux.h>
>
> +#define CNT_CONFIG_OFF         0       /* CNT Config Offset */
> +#define CNT_IMASK_OFF          4       /* CNT Interrupt Mask Offset */
> +#define CNT_STATUS_OFF         8       /* CNT Status Offset */
> +#define CNT_COMMAND_OFF                12      /* CNT Command Offset */
> +#define CNT_DEBOUNCE_OFF       16      /* CNT Debounce Offset */
> +#define CNT_COUNTER_OFF                20      /* CNT Counter Offset */
> +#define CNT_MAX_OFF            24      /* CNT Maximum Count Offset */
> +#define CNT_MIN_OFF            28      /* CNT Minimum Count Offset */
> +
>  struct bfin_rot {
>         struct input_dev *input;
> +       void __iomem *base;
>         int irq;
>         unsigned int up_key;
>         unsigned int down_key;
> @@ -56,14 +67,14 @@ static irqreturn_t bfin_rotary_isr(int irq, void *dev_id)
>         struct bfin_rot *rotary = platform_get_drvdata(pdev);
>         int delta;
>
> -       switch (bfin_read_CNT_STATUS()) {
> +       switch (readw(rotary->base + CNT_STATUS_OFF)) {
>
>         case ICII:
>                 break;
>
>         case UCII:
>         case DCII:
> -               delta = bfin_read_CNT_COUNTER();
> +               delta = readl(rotary->base + CNT_COUNTER_OFF);
>                 if (delta)
>                         report_rotary_event(rotary, delta);
>                 break;
> @@ -76,19 +87,46 @@ static irqreturn_t bfin_rotary_isr(int irq, void *dev_id)
>                 break;
>         }
>
> -       bfin_write_CNT_COMMAND(W1LCNT_ZERO);    /* Clear COUNTER */
> -       bfin_write_CNT_STATUS(-1);      /* Clear STATUS */
> +       writew(W1LCNT_ZERO, rotary->base + CNT_COMMAND_OFF); /* Clear COUNTER */
> +       writew(-1, rotary->base + CNT_STATUS_OFF); /* Clear STATUS */
>
>         return IRQ_HANDLED;
>  }
>
>  static int bfin_rotary_probe(struct platform_device *pdev)
>  {
> +       struct device *dev = &pdev->dev;
>         struct bfin_rotary_platform_data *pdata = dev_get_platdata(&pdev->dev);
>         struct bfin_rot *rotary;
> +       struct resource *res;
>         struct input_dev *input;
>         int error;
>
> +       rotary = devm_kzalloc(dev, sizeof(struct bfin_rot), GFP_KERNEL);
> +       if (!rotary) {
> +               dev_err(dev, "fail to malloc bfin_rot\n");
> +               return -ENOMEM;
> +       }
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       rotary->base = devm_ioremap_resource(dev, res);
> +       if (IS_ERR(rotary->base))
> +               return PTR_ERR(rotary->base);
> +
> +       rotary->irq = platform_get_irq(pdev, 0);
> +       if (rotary->irq < 0) {
> +               dev_err(dev, "No rotary IRQ specified\n");
> +               return -ENOENT;
> +       }
> +
> +       error = devm_request_irq(dev, rotary->irq, bfin_rotary_isr,
> +                           0, dev_name(&pdev->dev), pdev);
> +       if (error) {
> +               dev_err(dev, "unable to claim irq %d; error %d\n",
> +                       rotary->irq, error);
> +               return error;
> +       }
> +
>         /* Basic validation */
>         if ((pdata->rotary_up_key && !pdata->rotary_down_key) ||
>             (!pdata->rotary_up_key && pdata->rotary_down_key)) {
> @@ -97,15 +135,14 @@ static int bfin_rotary_probe(struct platform_device *pdev)
>
>         error = peripheral_request_list(pdata->pin_list, dev_name(&pdev->dev));
>         if (error) {
> -               dev_err(&pdev->dev, "requesting peripherals failed\n");
> +               dev_err(dev, "requesting peripherals failed\n");
>                 return error;
>         }
>
> -       rotary = kzalloc(sizeof(struct bfin_rot), GFP_KERNEL);
>         input = input_allocate_device();
> -       if (!rotary || !input) {
> +       if (!input) {
>                 error = -ENOMEM;
> -               goto out1;
> +               goto out;
>         }
>
>         rotary->input = input;
> @@ -115,10 +152,6 @@ static int bfin_rotary_probe(struct platform_device *pdev)
>         rotary->button_key = pdata->rotary_button_key;
>         rotary->rel_code = pdata->rotary_rel_code;
>
> -       error = rotary->irq = platform_get_irq(pdev, 0);
> -       if (error < 0)
> -               goto out1;
> -
>         input->name = pdev->name;
>         input->phys = "bfin-rotary/input0";
>         input->dev.parent = &pdev->dev;
> @@ -144,45 +177,36 @@ static int bfin_rotary_probe(struct platform_device *pdev)
>                 __set_bit(rotary->button_key, input->keybit);
>         }
>
> -       error = request_irq(rotary->irq, bfin_rotary_isr,
> -                           0, dev_name(&pdev->dev), pdev);
> -       if (error) {
> -               dev_err(&pdev->dev,
> -                       "unable to claim irq %d; error %d\n",
> -                       rotary->irq, error);
> -               goto out1;
> -       }
> -
>         error = input_register_device(input);
>         if (error) {
> -               dev_err(&pdev->dev,
> -                       "unable to register input device (%d)\n", error);
> -               goto out2;
> +               dev_err(dev, "unable to register input device (%d)\n", error);
> +               goto out;
>         }
>
>         if (pdata->rotary_button_key)
> -               bfin_write_CNT_IMASK(CZMIE);
> +               writew(CZMIE, rotary->base + CNT_IMASK_OFF);
>
>         if (pdata->mode & ROT_DEBE)
> -               bfin_write_CNT_DEBOUNCE(pdata->debounce & DPRESCALE);
> +               writew(pdata->debounce & DPRESCALE,
> +                       rotary->base + CNT_DEBOUNCE_OFF);
>
>         if (pdata->mode)
> -               bfin_write_CNT_CONFIG(bfin_read_CNT_CONFIG() |
> -                                       (pdata->mode & ~CNTE));
> +               writew(readw(rotary->base + CNT_CONFIG_OFF) |
> +                       (pdata->mode & ~CNTE),
> +                       rotary->base + CNT_CONFIG_OFF);
>
> -       bfin_write_CNT_IMASK(bfin_read_CNT_IMASK() | UCIE | DCIE);
> -       bfin_write_CNT_CONFIG(bfin_read_CNT_CONFIG() | CNTE);
> +       writew(readw(rotary->base + CNT_IMASK_OFF) | UCIE | DCIE,
> +               rotary->base + CNT_IMASK_OFF);
> +       writew(readw(rotary->base + CNT_CONFIG_OFF) | CNTE,
> +               rotary->base + CNT_CONFIG_OFF);
>
>         platform_set_drvdata(pdev, rotary);
>         device_init_wakeup(&pdev->dev, 1);
>
>         return 0;
>
> -out2:
> -       free_irq(rotary->irq, pdev);
> -out1:
> +out:
>         input_free_device(input);
> -       kfree(rotary);
>         peripheral_free_list(per_cnt);
>
>         return error;
> @@ -193,15 +217,12 @@ static int bfin_rotary_remove(struct platform_device *pdev)
>         struct bfin_rotary_platform_data *pdata = dev_get_platdata(&pdev->dev);
>         struct bfin_rot *rotary = platform_get_drvdata(pdev);
>
> -       bfin_write_CNT_CONFIG(0);
> -       bfin_write_CNT_IMASK(0);
> +       writew(0, rotary->base + CNT_CONFIG_OFF);
> +       writew(0, rotary->base + CNT_IMASK_OFF);
>
> -       free_irq(rotary->irq, pdev);
>         input_unregister_device(rotary->input);
>         peripheral_free_list(pdata->pin_list);
>
> -       kfree(rotary);
> -
>         return 0;
>  }
>
> @@ -211,9 +232,9 @@ static int bfin_rotary_suspend(struct device *dev)
>         struct platform_device *pdev = to_platform_device(dev);
>         struct bfin_rot *rotary = platform_get_drvdata(pdev);
>
> -       rotary->cnt_config = bfin_read_CNT_CONFIG();
> -       rotary->cnt_imask = bfin_read_CNT_IMASK();
> -       rotary->cnt_debounce = bfin_read_CNT_DEBOUNCE();
> +       rotary->cnt_config = readw(rotary->base + CNT_CONFIG_OFF);
> +       rotary->cnt_imask = readw(rotary->base + CNT_IMASK_OFF);
> +       rotary->cnt_debounce = readw(rotary->base + CNT_DEBOUNCE_OFF);
>
>         if (device_may_wakeup(&pdev->dev))
>                 enable_irq_wake(rotary->irq);
> @@ -226,15 +247,15 @@ static int bfin_rotary_resume(struct device *dev)
>         struct platform_device *pdev = to_platform_device(dev);
>         struct bfin_rot *rotary = platform_get_drvdata(pdev);
>
> -       bfin_write_CNT_DEBOUNCE(rotary->cnt_debounce);
> -       bfin_write_CNT_IMASK(rotary->cnt_imask);
> -       bfin_write_CNT_CONFIG(rotary->cnt_config & ~CNTE);
> +       writew(rotary->cnt_debounce, rotary->base + CNT_DEBOUNCE_OFF);
> +       writew(rotary->cnt_imask, rotary->base + CNT_IMASK_OFF);
> +       writew(rotary->cnt_config & ~CNTE, rotary->base + CNT_CONFIG_OFF);
>
>         if (device_may_wakeup(&pdev->dev))
>                 disable_irq_wake(rotary->irq);
>
>         if (rotary->cnt_config & CNTE)
> -               bfin_write_CNT_CONFIG(rotary->cnt_config);
> +               writew(rotary->cnt_config, rotary->base + CNT_CONFIG_OFF);
>
>         return 0;
>  }
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux