On Thu, Jan 08, 2015 at 10:02:49PM +0100, Moritz Fischer wrote:
> Signed-off-by: Moritz Fischer <moritz.fischer@xxxxxxxxx>
> ---
> drivers/input/misc/Kconfig | 10 +++
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/e3x0-button.c | 153 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 164 insertions(+)
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index 23297ab..84a56b4 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -93,6 +93,16 @@ config INPUT_BMA150
> To compile this driver as a module, choose M here: the
> module will be called bma150.
>
> +config INPUT_E3X0_BUTTON
> + tristate "NI Ettus Research USRP E3x0 Button support."
> + default n
> + help
> + Say Y here to enable support for the NI Ettus Research
> + USRP E3x0 Button.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called e3x0_button.
> +
> config INPUT_PCSPKR
> tristate "PC Speaker support"
> depends on PCSPKR_PLATFORM
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 19c7603..b1775a5 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -26,6 +26,7 @@ obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
> obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o
> obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o
> obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
> +obj-$(CONFIG_INPUT_E3X0_BUTTON) += e3x0-button.o
> obj-$(CONFIG_INPUT_DRV260X_HAPTICS) += drv260x.o
> obj-$(CONFIG_INPUT_DRV2667_HAPTICS) += drv2667.o
> obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
> diff --git a/drivers/input/misc/e3x0-button.c b/drivers/input/misc/e3x0-button.c
> new file mode 100644
> index 0000000..0022f6a
> --- /dev/null
> +++ b/drivers/input/misc/e3x0-button.c
> @@ -0,0 +1,153 @@
> +/*
> + * Copyright (c) 2014, National Instruments Corp. All rights reserved.
> + *
> + * Driver for NI Ettus Research USRP E3x0 Button Driver
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/of.h>
> +#include <linux/slab.h>
> +
> +/**
> + * struct e3x0_button - e3x0 button information
> + * @input_dev: pointer to input device
> + * @irq_press: irq number for press event
> + * @irq_release: irq number for release event
> + */
> +struct e3x0_button {
> + struct input_dev *idev;
> + int irq_press;
> + int irq_release;
> +};
> +
> +static irqreturn_t e3x0_button_handler(int irq, void *data)
> +{
> + struct e3x0_button *button = data;
> +
> + if (irq == button->irq_press)
> + input_report_key(button->idev, KEY_POWER, 1);
> + else if (irq == button->irq_release)
> + input_report_key(button->idev, KEY_POWER, 0);
Hmm, if you create a separate IRSs for press and release you would not
need to store irq_press and irq_release and consequently would not have
to use/allocate e3x0_button structure at all (unless you are planning to
expand the driver later).
> +
> + input_sync(button->idev);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int e3x0_button_probe(struct platform_device *pdev)
> +{
> + struct e3x0_button *button;
> + struct input_dev *input;
> + int irq_press, irq_release;
> + int error;
> +
> + irq_press = platform_get_irq_byname(pdev, "press");
> + if (irq_press < 0) {
> + dev_err(&pdev->dev, "No IRQ for 'press', error=%d\n",
> + irq_press);
> + return irq_press;
> + }
> +
> + irq_release = platform_get_irq_byname(pdev, "release");
> + if (irq_release < 0) {
> + dev_err(&pdev->dev, "No IRQ for 'release', error=%d\n",
> + irq_release);
> + return irq_release;
> + }
> +
> + button = devm_kzalloc(&pdev->dev, sizeof(*button),
> + GFP_KERNEL);
> + if (!button)
> + return -ENOMEM;
> +
> + input = devm_input_allocate_device(&pdev->dev);
> + if (!input)
> + return -ENOMEM;
> +
> + button->idev = input;
> + button->irq_press = irq_press;
> + button->irq_release = irq_release;
> +
> + input->name = "NI Ettus Research USRP E3x0 Button Driver";
> + input->phys = "e3x0_button/input0";
> + input->dev.parent = &pdev->dev;
> +
> + input_set_capability(input, EV_KEY, KEY_POWER);
> +
> + error = devm_request_irq(&pdev->dev, button->irq_press,
> + e3x0_button_handler, 0,
> + "e3x0-button", button);
> + if (error < 0) {
> + dev_err(&pdev->dev, "Failed to request 'press' IRQ#%d: %d\n",
> + button->irq_press, error);
> + return error;
> + }
> +
> + error = devm_request_irq(&pdev->dev, button->irq_release,
> + e3x0_button_handler, 0,
> + "e3x0-button", button);
> + if (error < 0) {
> + dev_err(&pdev->dev, "Failed to request 'release' IRQ#%d: %d\n",
> + button->irq_release, error);
> + return error;
> + }
> +
> + error = input_register_device(button->idev);
> + if (error) {
> + dev_err(&pdev->dev, "Can't register input device: %d\n", error);
> + return error;
> + }
> +
> + platform_set_drvdata(pdev, button);
> + return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id e3x0_button_match[] = {
> + { .compatible = "ettus,e3x0-button", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, e3x0_button_match);
> +#endif
> +
> +static struct platform_driver e3x0_button_driver = {
> + .driver = {
> + .name = "e3x0-button",
> + .owner = THIS_MODULE,
No need to set up owner explicitly - it is down automatically.
> + .of_match_table = of_match_ptr(e3x0_button_match),
> + },
> + .probe = e3x0_button_probe,
> +};
> +
> +static int __init e3x0_button_init(void)
> +{
> + pr_info("e3x0-button: Copyright (c) 2014 National Instruments Corp");
Let's drop this message and use module_platform_driver() instead of
custom init/exit implementations.
> + return platform_driver_register(&e3x0_button_driver);
> +}
> +
> +static void e3x0_button_exit(void)
> +{
> + platform_driver_unregister(&e3x0_button_driver);
> +}
> +
> +module_init(e3x0_button_init);
> +module_exit(e3x0_button_exit);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Moritz Fischer <moritz.fischer@xxxxxxxxx>");
> +MODULE_DESCRIPTION("NI Ettus Research USRP E3x0 Button driver");
> +MODULE_ALIAS("platform:e3x0-button");
> --
> 1.9.3
>
By the way, don't you need to set up this device as a wakeup source?
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
