On Wed, Jan 07, 2015 at 01:25:54PM -0300, Walter Lozano wrote:
> Hi Dimitry,
>
> First of all, thanks for your feedback
>
> On Wed, Jan 7, 2015 at 5:01 AM, Dmitry Torokhov
> <dmitry.torokhov@xxxxxxxxx> wrote:
> > Hi Walter,
> >
> > On Tue, Jan 06, 2015 at 11:58:56PM -0300, Walter Lozano wrote:
> >> This patch adds the missing support for OF to the adxl34x digital
> >> accelerometer. This is a basic version which supports the main
> >> optional parameters. This implementation copies the default values
> >> to the adxl34x_platform_data structure and overrides the values
> >> that are passed from the device tree.
> >>
> >> Signed-off-by: Walter Lozano <walter@xxxxxxxxxxxxxxxxxxxx>
> >> ---
> >> drivers/input/misc/adxl34x.c | 108 +++++++++++++++++++++++++++++++++++++++++-
> >> 1 file changed, 107 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/input/misc/adxl34x.c b/drivers/input/misc/adxl34x.c
> >> index 2b2d02f..b3e06a3 100644
> >> --- a/drivers/input/misc/adxl34x.c
> >> +++ b/drivers/input/misc/adxl34x.c
> >> @@ -16,6 +16,8 @@
> >> #include <linux/workqueue.h>
> >> #include <linux/input/adxl34x.h>
> >> #include <linux/module.h>
> >> +#include <linux/of.h>
> >> +#include <linux/of_device.h>
> >>
> >> #include "adxl34x.h"
> >>
> >> @@ -688,13 +690,113 @@ static void adxl34x_input_close(struct input_dev *input)
> >> mutex_unlock(&ac->mutex);
> >> }
> >>
> >> +void adxl34x_parse_dt(struct device *dev, struct adxl34x_platform_data *pdata){
> >> + if (!dev->of_node)
> >> + return;
> >> +
> >> + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
> >> +
> >> + memcpy(pdata, &adxl34x_default_init, sizeof(struct adxl34x_platform_data));
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,tap-axis-control",
> >> + &pdata->tap_axis_control);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,tap-threshold",
> >> + &pdata->tap_threshold);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,tap-duration",
> >> + &pdata->tap_duration);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,tap-latency",
> >> + &pdata->tap_latency);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,tap-window",
> >> + &pdata->tap_window);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,act-axis-control",
> >> + &pdata->act_axis_control);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,activity-threshold",
> >> + &pdata->activity_threshold);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,inactivity-threshold",
> >> + &pdata->inactivity_threshold);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,inactivity-time",
> >> + &pdata->inactivity_time);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,free-fall-threshold",
> >> + &pdata->free_fall_threshold);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,free-fall-time",
> >> + &pdata->free_fall_time);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,data-rate",
> >> + &pdata->data_rate);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,data-range",
> >> + &pdata->data_range);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,low-power-mode",
> >> + &pdata->low_power_mode);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,power-mode",
> >> + &pdata->power_mode);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,fifo-mode",
> >> + &pdata->fifo_mode);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,watermark",
> >> + &pdata->watermark);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,use-int2",
> >> + &pdata->use_int2);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,orientation-enable",
> >> + &pdata->orientation_enable);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,deadzone-angle",
> >> + &pdata->deadzone_angle);
> >> +
> >> + of_property_read_u8(dev->of_node, "adi,divisor-length",
> >> + &pdata->divisor_length);
> >> +
> >> + of_property_read_u32(dev->of_node, "adi,ev-type",
> >> + &pdata->ev_type);
> >
> > All these ev* properties are Linux-specific so should have linux prefix
> > and not adi.
>
> Yes, I have many doubts about these parameters. First I'm not sure if anybody
> will need to change them as the accelerometer reports absolute values.
> I was thinking
> about omitting them but I would like someone else opinion.
I wonder if someone will mount the chip "weirdly" thy might want to
remap the axes.
>
> The default values for these parameters are
>
> .ev_type = EV_ABS,
> .ev_code_x = ABS_X, /* EV_REL */
> .ev_code_y = ABS_Y, /* EV_REL */
> .ev_code_z = ABS_Z, /* EV_REL */
>
> .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY {x,y,z} */
>
> In case if it is worthy should I add nodes for each different event?
>
> For example
>
> axisx{
> label = "Axis X";
> linux,code = <0>;
> }
>
I'll defer to device tree guys on this.
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
