Re: [PATCH v1 3/4] leds: Let the binding document example for leds-gpio follow the gpio bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 07, 2015 at 10:08:41AM +0100, Olliver Schinagl wrote:
> From: Olliver Schinagl <oliver@xxxxxxxxxxx>
> 
> In the gpio bindings documents it is requested to use the marco's in
> include/dt-bindings/gpio/gpio.h whenever possible. The gpios in the led
> drivers don't seem to form an exception, so update the example in the
> document bindings.
> 
> Signed-off-by: Olliver Schinagl <oliver@xxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/leds/leds-gpio.txt | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
> index f77148f..d544cf1 100644
> --- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
> +++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt
> @@ -26,16 +26,18 @@ LED sub-node properties:
>  
>  Examples:
>  
> +#include <dt-bindings/gpio/gpio.h>
> +
>  leds {
>  	compatible = "gpio-leds";
>  	hdd {
>  		label = "IDE Activity";
> -		gpios = <&mcu_pio 0 1>; /* Active low */
> +		gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
>  		linux,default-trigger = "ide-disk";
>  	};
>  
>  	fault {
> -		gpios = <&mcu_pio 1 0>;
> +		gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>;
>  		/* Keep LED on if BIOS detected hardware fault */
>  		default-state = "keep";
>  	};
> @@ -44,11 +46,11 @@ leds {
>  run-control {
>  	compatible = "gpio-leds";
>  	red {
> -		gpios = <&mpc8572 6 0>;
> +		gpios = <&mpc8572 6 GPIO_ACTIVE_HIHG>;

Typo, s/HIHG/HIGH/

>  		default-state = "off";
>  	};
>  	green {
> -		gpios = <&mpc8572 7 0>;
> +		gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>;
>  		default-state = "on";
>  	};
>  };
> @@ -57,7 +59,7 @@ leds {
>  	compatible = "gpio-leds";
>  
>  	charger-led {
> -		gpios = <&gpio1 2 0>;
> +		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
>  		linux,default-trigger = "max8903-charger-charging";
>  		retain-state-suspended;
>  	};
> -- 
> 2.1.4
> 

-- 
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux