Allowing hid-rmi to bind to non rmi devices allows us to support composite USB
devices which contain several HID devices one of which is a HID touchpad.
Since all of the devices have the same VID and PID we can add the device
to the hid_have_special_driver list and have hid-rmi handle all of the devices.
Then hid-rmi's probe can look for the rmi specific HID report IDs and decide if
it should handle the device as a rmi device or simply report that the events
needs additional processing.
Signed-off-by: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
---
This patch series is my second attempt at getting the hid-rmi driver working on
the Razer Blade 14 based on Benjamin's comments. I decided to break it up into
three separate patches. This one allows hid-rmi to bind to all of the devices.
Instead of adding a quirk I just look at the report IDs to see if it should
do rmi or not.
drivers/hid/hid-rmi.c | 93 +++++++++++++++++++++++++++++++++++++++++----------
1 file changed, 76 insertions(+), 17 deletions(-)
diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
index b51200f..018f80f 100644
--- a/drivers/hid/hid-rmi.c
+++ b/drivers/hid/hid-rmi.c
@@ -33,6 +33,9 @@
#define RMI_READ_DATA_PENDING BIT(1)
#define RMI_STARTED BIT(2)
+/* device flags */
+#define RMI_DEVICE BIT(0)
+
enum rmi_mode_type {
RMI_MODE_OFF = 0,
RMI_MODE_ATTN_REPORTS = 1,
@@ -118,6 +121,8 @@ struct rmi_data {
struct work_struct reset_work;
struct hid_device *hdev;
+
+ unsigned long device_flags;
};
#define RMI_PAGE(addr) (((addr) >> 8) & 0xff)
@@ -452,9 +457,23 @@ static int rmi_raw_event(struct hid_device *hdev,
return rmi_read_data_event(hdev, data, size);
case RMI_ATTN_REPORT_ID:
return rmi_input_event(hdev, data, size);
- case RMI_MOUSE_REPORT_ID:
+ default:
+ return 1;
+ }
+
+ return 0;
+}
+
+static int rmi_event(struct hid_device *hdev, struct hid_field *field,
+ struct hid_usage *usage, __s32 value)
+{
+ struct rmi_data *data = hid_get_drvdata(hdev);
+
+ if ((data->device_flags & RMI_DEVICE) &&
+ (field->application == HID_GD_POINTER ||
+ field->application == HID_GD_MOUSE)) {
rmi_schedule_reset(hdev);
- break;
+ return 1;
}
return 0;
@@ -856,6 +875,9 @@ static void rmi_input_configured(struct hid_device *hdev, struct hid_input *hi)
if (ret)
return;
+ if (!(data->device_flags & RMI_DEVICE))
+ return;
+
/* Allow incoming hid reports */
hid_device_io_start(hdev);
@@ -914,8 +936,33 @@ static int rmi_input_mapping(struct hid_device *hdev,
struct hid_input *hi, struct hid_field *field,
struct hid_usage *usage, unsigned long **bit, int *max)
{
- /* we want to make HID ignore the advertised HID collection */
- return -1;
+ struct rmi_data *data = hid_get_drvdata(hdev);
+
+ /*
+ * we want to make HID ignore the advertised HID collection
+ * for RMI deivces
+ */
+ if (data->device_flags & RMI_DEVICE)
+ return -1;
+
+ return 0;
+}
+
+static int rmi_check_valid_report_id(struct hid_device *hdev, unsigned type,
+ unsigned id, struct hid_report **report)
+{
+ int i;
+
+ *report = hdev->report_enum[type].report_id_hash[id];
+ if (*report) {
+ for (i = 0; i < (*report)->maxfield; i++) {
+ unsigned app = (*report)->field[i]->application;
+ if ((app & HID_USAGE_PAGE) >= HID_UP_MSVENDOR)
+ return 1;
+ }
+ }
+
+ return 0;
}
static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
@@ -925,6 +972,7 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
size_t alloc_size;
struct hid_report *input_report;
struct hid_report *output_report;
+ struct hid_report *feature_report;
data = devm_kzalloc(&hdev->dev, sizeof(struct rmi_data), GFP_KERNEL);
if (!data)
@@ -943,27 +991,35 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
return ret;
}
- input_report = hdev->report_enum[HID_INPUT_REPORT]
- .report_id_hash[RMI_ATTN_REPORT_ID];
- if (!input_report) {
- hid_err(hdev, "device does not have expected input report\n");
- ret = -ENODEV;
- return ret;
+ /*
+ * Check for the RMI specific report ids. If they are misisng
+ * simply return and let the events be processed by hid-input
+ */
+ if (!rmi_check_valid_report_id(hdev, HID_FEATURE_REPORT,
+ RMI_SET_RMI_MODE_REPORT_ID, &feature_report)) {
+ hid_dbg(hdev, "device does not have set mode feature report\n");
+ goto start;
+ }
+
+ if (!rmi_check_valid_report_id(hdev, HID_INPUT_REPORT,
+ RMI_ATTN_REPORT_ID, &input_report)) {
+ hid_dbg(hdev, "device does not have attention input report\n");
+ goto start;
}
data->input_report_size = (input_report->size >> 3) + 1 /* report id */;
- output_report = hdev->report_enum[HID_OUTPUT_REPORT]
- .report_id_hash[RMI_WRITE_REPORT_ID];
- if (!output_report) {
- hid_err(hdev, "device does not have expected output report\n");
- ret = -ENODEV;
- return ret;
+ if (!rmi_check_valid_report_id(hdev, HID_OUTPUT_REPORT,
+ RMI_WRITE_REPORT_ID, &output_report)) {
+ hid_dbg(hdev,
+ "device does not have rmi write output report\n");
+ goto start;
}
data->output_report_size = (output_report->size >> 3)
+ 1 /* report id */;
+ data->device_flags |= RMI_DEVICE;
alloc_size = data->output_report_size + data->input_report_size;
data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL);
@@ -978,13 +1034,15 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
mutex_init(&data->page_mutex);
+start:
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret) {
hid_err(hdev, "hw start failed\n");
return ret;
}
- if (!test_bit(RMI_STARTED, &data->flags))
+ if ((data->device_flags & RMI_DEVICE) &&
+ !test_bit(RMI_STARTED, &data->flags))
/*
* The device maybe in the bootloader if rmi_input_configured
* failed to find F11 in the PDT. Print an error, but don't
@@ -1017,6 +1075,7 @@ static struct hid_driver rmi_driver = {
.id_table = rmi_id,
.probe = rmi_probe,
.remove = rmi_remove,
+ .event = rmi_event,
.raw_event = rmi_raw_event,
.input_mapping = rmi_input_mapping,
.input_configured = rmi_input_configured,
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
