Dudley,
On Mon, Dec 15, 2014 at 02:23:19PM +0800, Dudley Du wrote:
> Add force re-calibrate function supported for gen3 trackpad device,
> it can be used through sysfs calibrate interface.
> TEST=test on Chromebooks.
>
> Signed-off-by: Dudley Du <dudley.dulixin@xxxxxxxxx>
> ---
> drivers/input/mouse/cyapa_gen3.c | 58 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 58 insertions(+)
>
> diff --git a/drivers/input/mouse/cyapa_gen3.c b/drivers/input/mouse/cyapa_gen3.c
> index f42e008..836a00b 100644
> --- a/drivers/input/mouse/cyapa_gen3.c
> +++ b/drivers/input/mouse/cyapa_gen3.c
> @@ -754,6 +754,63 @@ static int cyapa_gen3_do_fw_update(struct cyapa *cyapa,
> return 0;
> }
>
> +static ssize_t cyapa_gen3_do_calibrate(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct cyapa *cyapa = dev_get_drvdata(dev);
> + int tries = 20; /* max recalibration timeout 2s. */
Where this timeout is used is not obvious here.
Maybe move it to the loop where it is used?
+ int tries;
> + int ret;
> +
> + ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS);
> + if (ret < 0) {
> + dev_err(dev, "Error reading dev status: %d\n", ret);
> + goto out;
> + }
> + if ((ret & CYAPA_DEV_NORMAL) != CYAPA_DEV_NORMAL) {
> + dev_warn(dev, "Trackpad device is busy, device state: 0x%02x\n",
> + ret);
> + ret = -EAGAIN;
> + goto out;
> + }
> +
> + ret = cyapa_write_byte(cyapa, CYAPA_CMD_SOFT_RESET,
> + OP_RECALIBRATION_MASK);
> + if (ret < 0) {
> + dev_err(dev, "Failed to send calibrate command: %d\n",
> + ret);
> + goto out;
> + }
> +
Set tries here since it is used in this loop.
+ tries = 20; /* max recalibration timeout 2s. */
> + do {
> + /*
> + * For this recalibration, the max time will not exceed 2s.
> + * The average time is approximately 500 - 700 ms, and we
> + * will check the status every 100 - 200ms.
> + */
> + usleep_range(100000, 200000);
> +
> + ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS);
> + if (ret < 0) {
> + dev_err(dev, "Error reading dev status: %d\n",
> + ret);
> + goto out;
> + }
> + if ((ret & CYAPA_DEV_NORMAL) == CYAPA_DEV_NORMAL)
> + break;
> + } while (--tries);
> +
> + if (tries == 0) {
> + dev_err(dev, "Failed to calibrate. Timeout.\n");
> + ret = -ETIMEDOUT;
> + goto out;
> + }
> + dev_dbg(dev, "Calibration successful.\n");
> +
> +out:
> + return ret < 0 ? ret : count;
> +}
> +
> static ssize_t cyapa_gen3_show_baseline(struct device *dev,
> struct device_attribute *attr, char *buf)
> {
> @@ -1137,6 +1194,7 @@ const struct cyapa_dev_ops cyapa_gen3_ops = {
> .bl_deactivate = cyapa_gen3_bl_deactivate,
>
> .show_baseline = cyapa_gen3_show_baseline,
> + .calibrate_store = cyapa_gen3_do_calibrate,
>
> .state_parse = cyapa_gen3_state_parse,
> .operational_check = cyapa_gen3_do_operational_check,
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
- Jeremiah Mahler
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
