Re: PROBLEM: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a hardware click

[Andrew Duggan <aduggan@xxxxxxxxxxxxx>]

On 12/08/2014 10:39 AM, Amordea Whiteoak wrote:
> My Linux newbieness is showing. :)
>
> I attempted to edit and boot the grub configuration, but I don't think
> I did it right. I went with the seemingly more sure-fire way to get
> your data and followed the second set of instructions.
>
> Enclosed is all the dmesg output once I got that working.

Thanks, based on the log I can see that this firmware has the larger 
input report size which confirms my suspicion that this touchpad has the 
new feature which I referred to in my previous email.

Andrew

> On Mon, Dec 8, 2014 at 12:59 PM, Benjamin Tissoires
> <benjamin.tissoires@xxxxxxxxx> wrote:
> > On Mon, Dec 8, 2014 at 12:14 PM, Amordea Whiteoak <amordea@xxxxxxxxx> wrote:
> > > There may be a thing I am failing to understand about dmesg here, but
> > > a grep through both dmesg and /var/log/dmesg yielded no hits on
> > > "i2c_hid.debug=1". I did find plenty of hits on just "i2c_hid", which
> > > yielded several repetitive lines of what appears to be various
> > > modules. Please let me know if there is something I am failing to
> > > understand here, but I could not find the requested phrase in my
> > > dmesg.
> > I meant that when you reboot the laptop, in grub, append
> > "i2c_hid.debug=1" to the kernel command line.
> >
> > This should be seen in one of the first few lines of dmesg (the one
> > starting by "[    0.000000] Command line:
> > BOOT_IMAGE=/boot/vmlinuz-3.18.0-031800rc7-generic "), and a lot of raw
> > events should be dumped in the dmesg.
> >
> > > I do have the hid-recorder output though, which I am attaching here.
> > > This time I used a non-conductive pen to only generate clicks without
> > > all the positioning data piling in on top. This is a recording of two
> > > left clicks.
> > Ok, so at least, the device sends a sane behavior (one event per
> > click/release, with one bit changed). Unfortunately, I think the
> > problem lies in the configuration of your device by hid-rmi. So the
> > dmesg output while i2c_hid.debug=1 is set should help to figure out
> > the problem.
> >
> > If for whatever reasons you do not manage to get the parameter
> > appended to your command line, the following commands should suffice
> > (as root):
> > #> rmmod hid-rmi
> > #> echo 1 > /sys/module/i2c_hid/parameters/debug
> > #> modprobe hid-rmi
> >
> > do a few events on the touchpad (with clicks)
> >
> > #> echo 0 > /sys/module/i2c_hid/parameters/debug
> >
> > and send out the dmesg.
> >
> > Cheers,
> > Benjamin
> >
> > > If there is anything else I can provide, please let me know.
> > >
> > > Thank you for helping with this bug. :)
> > >
> > > On Mon, Dec 8, 2014 at 11:44 AM, Benjamin Tissoires
> > > <benjamin.tissoires@xxxxxxxxx> wrote:
> > > > Hi Amordea,
> > > >
> > > > On Mon, Dec 8, 2014 at 11:20 AM, Amordea Whiteoak <amordea@xxxxxxxxx> wrote:
> > > > > My apologies if my bug report was inadequate. It is the first upstream
> > > > > report I've ever filed, though I did attempt to give all the
> > > > > information they requested to the best of my ability.
> > > > Oh, no, I was not complaining about your way of reporting the bug. I
> > > > know that it can be difficult for users to report _and_ provide all
> > > > the necessary information unless you already know a little bit about
> > > > the communities, how they work and what tool they use.
> > > > My complain was more that the way it was triaged: try an upstream
> > > > kernel; oh, does not work; send it upstream because it's a "poor
> > > > driver implementation". Whereas here, there may be any part of the
> > > > stack involved unless we look at the evemu-record (which is the output
> > > > of the kernel BTW). And saying that the driver is badly designed
> > > > really does not help...
> > > > Last, the "meta bug" they have is either a problem in the kernel
> > > > drivers they ship, or a not up to date Xorg stack. FWIW, I don't think
> > > > we have this on Fedora.
> > > >
> > > > Anyway, thanks for the explanations that you give in the next
> > > > paragraph, it gives a more comprehensive bug report :)
> > > >
> > > > > If it helps: to be clear about the design of this clickpad, it is one
> > > > > where the entire pad is touch-sensitive, even the area over the
> > > > > hardware click buttons which are on the bottom. The entire pad is one
> > > > > piece, so the pad itself shifts when you click a button. The
> > > > > malfunction occurs whenever any of these buttons are clicked, but the
> > > > > simulated clicks (tapping on the pad) behave adequately and do not
> > > > > cause any mouse input lock-ups. The malfunction itself causes ALL
> > > > > subsequent mouse clicks from any source (including a USB mouse) to
> > > > > only act in the spot where the first hardware click from the clickpad
> > > > > was performed and cannot be adjusted until the clickpad has been
> > > > > disabled (xinput disable <id>). The hardware buttons on the clickpad
> > > > > itself do not register as clicks at all, they only cause all mouse
> > > > > input to malfunction as previously described.
> > > > >
> > > > > I am enclosing the requested evemu-record data. This is a recording of
> > > > > my clicking the left hardware click button three times in rapid
> > > > > succession, but failure generally occurs after the first click.
> > > > Many thanks for the logs. So here, I can see that when you click on
> > > > the touchpad, both BTN_LEFT and BTN_RIGHT are emitted, but they are
> > > > never released :) I do not see either the 2 other clicks.
> > > > So yes, here the driver is at fault and misses to release the clicks.
> > > > This infers the cross-device problem in X BTW.
> > > >
> > > > > A curious behavior I noticed in the process of getting this recording
> > > > > is that on the first click, I received a pasted text line in my
> > > > > terminal. I could not reproduce this behavior by doing an
> > > > > enable/disable cycle on the trackpad, but to confirm I rebooted a few
> > > > > times to test and sure enough, the very first click each boot triggers
> > > > > a clipboard paste event.
> > > > You must have the middle button emulation enabled in Xorg (hitting
> > > > both left and right button will trigger a middle button). So when we
> > > > will be able to fix this bug, the spurious middle click should
> > > > disappear.
> > > >
> > > > > If there is any more information I can provide, please let me know.
> > > > Ideally, I'd like to punt this one to Andrew, but I think we would be
> > > > grateful if you could also provide 2 more things:
> > > > - the dmesg when "i2c_hid.debug=1" is appended to the kernel boot line
> > > > (without the quotes)
> > > > - the hid-recorder output when you trigger the bug
> > > >
> > > > hid-recorder should be installed from sources in Ubuntu I guess:
> > > > http://bentiss.github.io/hid-replay-docs/
> > > >
> > > > The hid-recorder output might not be absolutely needed, so as long as
> > > > we have the dmesg with i2c_hid.debug=1, we should be fine.
> > > >
> > > > Cheers,
> > > > Benjamin
> > > >
> > > > > Thank you!
> > > > >
> > > > > On Mon, Dec 8, 2014 at 10:01 AM, Benjamin Tissoires
> > > > > <benjamin.tissoires@xxxxxxxxx> wrote:
> > > > > > Hi Amordea,
> > > > > >
> > > > > > I must say, the bug triaging is worse and worse with ubuntu :(
> > > > > >
> > > > > >  From the bug description, I can not tell if the problem lies in the
> > > > > > kernel, or if it is the synaptics input driver or the xserver which is
> > > > > > in fault. I would be tempted to say that the problem lies in the upper
> > > > > > layers given the cross-devices problem.
> > > > > >
> > > > > > Anyway, to be able to understand the problem, we will need to get an
> > > > > > evemu-record output of your device when you are reproducing the bug.
> > > > > > You can find evemu in your distribution channels, or here:
> > > > > > http://www.freedesktop.org/wiki/Evemu/
> > > > > >
> > > > > > Given that you have an hid-rmi/i2c device, I am adding Andrew in CC,
> > > > > > and Peter for the upper layers if there is anything wrong there.
> > > > > >
> > > > > > Cheers,
> > > > > > Benjamin
> > > > > >
> > > > > > On Sun, Dec 7, 2014 at 5:50 PM, Amordea Whiteoak <amordea@xxxxxxxxx> wrote:
> > > > > > > Original Bug Report:
> > > > > > > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1398533
> > > > > > >
> > > > > > > Bug Description: After clicking once at the bottom of my clickpad on
> > > > > > > either button, if I move my cursor elsewhere on the screen, and then
> > > > > > > subsequently click again (with either clickpad or external mouse this
> > > > > > > time) it registers a click at the location where my cursor icon was
> > > > > > > originally. I can continue to move my cursor anywhere on the screen,
> > > > > > > and it still registers the click in the original location.
> > > > > > >
> > > > > > >
> > > > > > > cat /proc/version
> > > > > > > Linux version 3.18.0-031800rc7-generic (apw@gomeisa) (gcc version
> > > > > > > 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201411302035 SMP Mon Dec 1
> > > > > > > 01:36:38 UTC 2014
> > > > > > >
> > > > > > >
> > > > > > > lsb_release -rd
> > > > > > > Description: Ubuntu 14.10
> > > > > > > Release: 14.10
> > > > > > >
> > > > > > >
> > > > > > > sh /usr/src/linux-headers-3.18.0-031800rc7/scripts/ver_linux
> > > > > > > If some fields are empty or look unusual you may have an old version.
> > > > > > > Compare to the current minimal requirements in Documentation/Changes.
> > > > > > >
> > > > > > > Linux woprjr 3.18.0-031800rc7-generic #201411302035 SMP Mon Dec 1
> > > > > > > 01:36:38 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
> > > > > > >
> > > > > > > Gnu C
> > > > > > > /usr/src/linux-headers-3.18.0-031800rc7/scripts/ver_linux:
> > > > > > > /usr/src/linux-headers-3.18.0-031800rc7/scripts/ver_linux: 20:
> > > > > > > /usr/src/linux-headers-3.18.0-031800rc7/scripts/ver_linux: ld: not
> > > > > > > found
> > > > > > > binutils
> > > > > > > util-linux             2.25.1
> > > > > > > mount                  debug
> > > > > > > module-init-tools      18
> > > > > > > e2fsprogs              1.42.10
> > > > > > > PPP                    2.4.5
> > > > > > > Linux C Library        2.19
> > > > > > > Dynamic linker (ldd)   2.19
> > > > > > > Procps                 3.3.9
> > > > > > > Net-tools              1.60
> > > > > > > Kbd                    1.15.5
> > > > > > > Sh-utils               8.23
> > > > > > > wireless-tools         30
> > > > > > > Modules Loaded         snd_hda_codec_hdmi snd_hda_codec_realtek
> > > > > > > snd_hda_codec_generic ctr ccm joydev hp_wmi hid_rmi sparse_keymap
> > > > > > > rfcomm bnep arc4 rtl8723be btcoexist rtl8723_common intel_rapl
> > > > > > > uvcvideo rtl_pci intel_soc_dts_thermal intel_powerclamp
> > > > > > > videobuf2_vmalloc videobuf2_memops coretemp rtlwifi videobuf2_core
> > > > > > > v4l2_common videodev mac80211 media kvm cfg80211 btusb
> > > > > > > crct10dif_pclmul crc32_pclmul bluetooth ghash_clmulni_intel serio_raw
> > > > > > > cryptd wmi snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep
> > > > > > > snd_seq_midi snd_seq_midi_event snd_rawmidi snd_soc_rt5640
> > > > > > > snd_soc_rl6231 snd_soc_core snd_compress dw_dmac i915
> > > > > > > snd_pcm_dmaengine dw_dmac_core snd_seq int3400_thermal int3403_thermal
> > > > > > > acpi_thermal_rel nls_iso8859_1 snd_pcm i2c_hid video
> > > > > > > intel_smartconnect drm_kms_helper hid drm rfkill_gpio snd_seq_device
> > > > > > > i2c_designware_platform i2c_algo_bit snd_soc_sst_acpi 8250_dw
> > > > > > > snd_timer i2c_designware_core hp_wireless shpchp spi_pxa2xx_platform
> > > > > > > snd pwm_lpss_platform lpc_ich mac_hid mei_txe pwm_lpss iosf_mbi mei
> > > > > > > soundcore parport_pc ppdev lp parport uas usb_storage mmc_block
> > > > > > > sdhci_acpi sdhci
> > > > > > >
> > > > > > >
> > > > > > > cat /proc/cpuinfo
> > > > > > > processor : 0
> > > > > > > vendor_id : GenuineIntel
> > > > > > > cpu family : 6
> > > > > > > model : 55
> > > > > > > model name : Intel(R) Celeron(R) CPU  N2840  @ 2.16GHz
> > > > > > > stepping : 8
> > > > > > > microcode : 0x829
> > > > > > > cpu MHz : 499.741
> > > > > > > cache size : 1024 KB
> > > > > > > physical id : 0
> > > > > > > siblings : 2
> > > > > > > core id : 0
> > > > > > > cpu cores : 2
> > > > > > > apicid : 0
> > > > > > > initial apicid : 0
> > > > > > > fpu : yes
> > > > > > > fpu_exception : yes
> > > > > > > cpuid level : 11
> > > > > > > wp : yes
> > > > > > > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> > > > > > > pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
> > > > > > > rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology
> > > > > > > nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2
> > > > > > > ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer
> > > > > > > rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi
> > > > > > > flexpriority ept vpid tsc_adjust smep erms
> > > > > > > bugs :
> > > > > > > bogomips : 4326.40
> > > > > > > clflush size : 64
> > > > > > > cache_alignment : 64
> > > > > > > address sizes : 36 bits physical, 48 bits virtual
> > > > > > > power management:
> > > > > > >
> > > > > > > processor : 1
> > > > > > > vendor_id : GenuineIntel
> > > > > > > cpu family : 6
> > > > > > > model : 55
> > > > > > > model name : Intel(R) Celeron(R) CPU  N2840  @ 2.16GHz
> > > > > > > stepping : 8
> > > > > > > microcode : 0x829
> > > > > > > cpu MHz : 499.741
> > > > > > > cache size : 1024 KB
> > > > > > > physical id : 0
> > > > > > > siblings : 2
> > > > > > > core id : 1
> > > > > > > cpu cores : 2
> > > > > > > apicid : 2
> > > > > > > initial apicid : 2
> > > > > > > fpu : yes
> > > > > > > fpu_exception : yes
> > > > > > > cpuid level : 11
> > > > > > > wp : yes
> > > > > > > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> > > > > > > pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
> > > > > > > rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology
> > > > > > > nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2
> > > > > > > ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer
> > > > > > > rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi
> > > > > > > flexpriority ept vpid tsc_adjust smep erms
> > > > > > > bugs :
> > > > > > > bogomips : 4326.40
> > > > > > > clflush size : 64
> > > > > > > cache_alignment : 64
> > > > > > > address sizes : 36 bits physical, 48 bits virtual
> > > > > > > power management:
> > > > > > >
> > > > > > >
> > > > > > > cat /proc/modules
> > > > > > > snd_hda_codec_hdmi 52670 1 - Live 0x0000000000000000
> > > > > > > snd_hda_codec_realtek 80420 1 - Live 0x0000000000000000
> > > > > > > snd_hda_codec_generic 69995 1 snd_hda_codec_realtek, Live 0x0000000000000000
> > > > > > > ctr 13193 1 - Live 0x0000000000000000
> > > > > > > ccm 17856 1 - Live 0x0000000000000000
> > > > > > > joydev 17587 0 - Live 0x0000000000000000
> > > > > > > hp_wmi 14017 0 - Live 0x0000000000000000
> > > > > > > hid_rmi 18060 0 - Live 0x0000000000000000
> > > > > > > sparse_keymap 13890 1 hp_wmi, Live 0x0000000000000000
> > > > > > > rfcomm 75066 8 - Live 0x0000000000000000
> > > > > > > bnep 23980 2 - Live 0x0000000000000000
> > > > > > > arc4 12573 2 - Live 0x0000000000000000
> > > > > > > rtl8723be 96097 0 - Live 0x0000000000000000
> > > > > > > btcoexist 51822 1 rtl8723be, Live 0x0000000000000000
> > > > > > > rtl8723_common 23662 1 rtl8723be, Live 0x0000000000000000
> > > > > > > intel_rapl 19196 0 - Live 0x0000000000000000
> > > > > > > uvcvideo 86723 0 - Live 0x0000000000000000
> > > > > > > rtl_pci 27417 1 rtl8723be, Live 0x0000000000000000
> > > > > > > intel_soc_dts_thermal 13523 0 - Live 0x0000000000000000
> > > > > > > intel_powerclamp 19099 0 - Live 0x0000000000000000
> > > > > > > videobuf2_vmalloc 13216 1 uvcvideo, Live 0x0000000000000000
> > > > > > > videobuf2_memops 13362 1 videobuf2_vmalloc, Live 0x0000000000000000
> > > > > > > coretemp 13638 0 - Live 0x0000000000000000
> > > > > > > rtlwifi 74744 2 rtl8723be,rtl_pci, Live 0x0000000000000000
> > > > > > > videobuf2_core 51547 1 uvcvideo, Live 0x0000000000000000
> > > > > > > v4l2_common 15715 1 videobuf2_core, Live 0x0000000000000000
> > > > > > > videodev 163831 3 uvcvideo,videobuf2_core,v4l2_common, Live 0x0000000000000000
> > > > > > > mac80211 697159 3 rtl8723be,rtl_pci,rtlwifi, Live 0x0000000000000000
> > > > > > > media 22008 2 uvcvideo,videodev, Live 0x0000000000000000
> > > > > > > kvm 475237 0 - Live 0x0000000000000000
> > > > > > > cfg80211 520257 2 rtlwifi,mac80211, Live 0x0000000000000000
> > > > > > > btusb 32691 0 - Live 0x0000000000000000
> > > > > > > crct10dif_pclmul 14268 0 - Live 0x0000000000000000
> > > > > > > crc32_pclmul 13180 0 - Live 0x0000000000000000
> > > > > > > bluetooth 486890 22 rfcomm,bnep,btusb, Live 0x0000000000000000
> > > > > > > ghash_clmulni_intel 13230 0 - Live 0x0000000000000000
> > > > > > > serio_raw 13483 0 - Live 0x0000000000000000
> > > > > > > cryptd 20531 1 ghash_clmulni_intel, Live 0x0000000000000000
> > > > > > > wmi 19379 1 hp_wmi, Live 0x0000000000000000
> > > > > > > snd_hda_intel 30824 1 - Live 0x0000000000000000
> > > > > > > snd_hda_controller 32234 1 snd_hda_intel, Live 0x0000000000000000
> > > > > > > snd_hda_codec 144641 5
> > > > > > > snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller,
> > > > > > > Live 0x0000000000000000
> > > > > > > snd_hwdep 17709 1 snd_hda_codec, Live 0x0000000000000000
> > > > > > > snd_seq_midi 13564 0 - Live 0x0000000000000000
> > > > > > > snd_seq_midi_event 14899 1 snd_seq_midi, Live 0x0000000000000000
> > > > > > > snd_rawmidi 31197 1 snd_seq_midi, Live 0x0000000000000000
> > > > > > > snd_soc_rt5640 93325 0 - Live 0x0000000000000000
> > > > > > > snd_soc_rl6231 13037 1 snd_soc_rt5640, Live 0x0000000000000000
> > > > > > > snd_soc_core 207780 1 snd_soc_rt5640, Live 0x0000000000000000
> > > > > > > snd_compress 19395 1 snd_soc_core, Live 0x0000000000000000
> > > > > > > dw_dmac 12835 0 - Live 0x0000000000000000
> > > > > > > i915 1031996 2 - Live 0x0000000000000000
> > > > > > > snd_pcm_dmaengine 15229 1 snd_soc_core, Live 0x0000000000000000
> > > > > > > dw_dmac_core 28558 1 dw_dmac, Live 0x0000000000000000
> > > > > > > snd_seq 63540 2 snd_seq_midi,snd_seq_midi_event, Live 0x0000000000000000
> > > > > > > int3400_thermal 13040 0 - Live 0x0000000000000000
> > > > > > > int3403_thermal 13255 0 - Live 0x0000000000000000
> > > > > > > acpi_thermal_rel 13807 1 int3400_thermal, Live 0x0000000000000000
> > > > > > > nls_iso8859_1 12713 2 - Live 0x0000000000000000
> > > > > > > snd_pcm 106273 7
> > > > > > > snd_hda_codec_hdmi,snd_hda_intel,snd_hda_controller,snd_hda_codec,snd_soc_rt5640,snd_soc_core,snd_pcm_dmaengine,
> > > > > > > Live 0x0000000000000000
> > > > > > > i2c_hid 19065 0 - Live 0x0000000000000000
> > > > > > > video 20649 1 i915, Live 0x0000000000000000
> > > > > > > intel_smartconnect 12637 0 - Live 0x0000000000000000
> > > > > > > drm_kms_helper 99802 1 i915, Live 0x0000000000000000
> > > > > > > hid 110572 2 hid_rmi,i2c_hid, Live 0x0000000000000000
> > > > > > > drm 323675 4 i915,drm_kms_helper, Live 0x0000000000000000
> > > > > > > rfkill_gpio 12761 0 - Live 0x0000000000000000
> > > > > > > snd_seq_device 14497 3 snd_seq_midi,snd_rawmidi,snd_seq, Live 0x0000000000000000
> > > > > > > i2c_designware_platform 13025 0 - Live 0x0000000000000000
> > > > > > > i2c_algo_bit 13564 1 i915, Live 0x0000000000000000
> > > > > > > snd_soc_sst_acpi 13007 0 - Live 0x0000000000000000
> > > > > > > 8250_dw 13474 0 - Live 0x0000000000000000
> > > > > > > snd_timer 30118 2 snd_seq,snd_pcm, Live 0x0000000000000000
> > > > > > > i2c_designware_core 14990 1 i2c_designware_platform, Live 0x0000000000000000
> > > > > > > hp_wireless 12637 0 - Live 0x0000000000000000
> > > > > > > shpchp 37216 0 - Live 0x0000000000000000
> > > > > > > spi_pxa2xx_platform 23256 0 - Live 0x0000000000000000
> > > > > > > snd 84025 15 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_soc_core,snd_compress,snd_seq,snd_pcm,snd_seq_device,snd_timer,
> > > > > > > Live 0x0000000000000000
> > > > > > > pwm_lpss_platform 12703 0 - Live 0x0000000000000000
> > > > > > > lpc_ich 21176 0 - Live 0x0000000000000000
> > > > > > > mac_hid 13275 0 - Live 0x0000000000000000
> > > > > > > mei_txe 19808 0 - Live 0x0000000000000000
> > > > > > > pwm_lpss 13281 1 pwm_lpss_platform, Live 0x0000000000000000
> > > > > > > iosf_mbi 13865 1 intel_soc_dts_thermal, Live 0x0000000000000000
> > > > > > > mei 88473 1 mei_txe, Live 0x0000000000000000
> > > > > > > soundcore 15091 2 snd_hda_codec,snd, Live 0x0000000000000000
> > > > > > > parport_pc 32909 0 - Live 0x0000000000000000
> > > > > > > ppdev 17711 0 - Live 0x0000000000000000
> > > > > > > lp 17799 0 - Live 0x0000000000000000
> > > > > > > parport 42481 3 parport_pc,ppdev,lp, Live 0x0000000000000000
> > > > > > > uas 22673 0 - Live 0x0000000000000000
> > > > > > > usb_storage 67010 2 uas, Live 0x0000000000000000
> > > > > > > mmc_block 36596 4 - Live 0x0000000000000000
> > > > > > > sdhci_acpi 13502 0 - Live 0x0000000000000000
> > > > > > > sdhci 43929 1 sdhci_acpi, Live 0x0000000000000000
> > > > > > >
> > > > > > >
> > > > > > > /proc/ioports
> > > > > > > 0000-006f : PCI Bus 0000:00
> > > > > > >    0000-001f : dma1
> > > > > > >    0020-0021 : pic1
> > > > > > >    0040-0043 : timer0
> > > > > > >    0050-0053 : timer1
> > > > > > >    0060-0060 : keyboard
> > > > > > >    0062-0062 : PNP0C09:00
> > > > > > >      0062-0062 : EC data
> > > > > > >    0064-0064 : keyboard
> > > > > > >    0066-0066 : PNP0C09:00
> > > > > > >      0066-0066 : EC cmd
> > > > > > > 0070-0077 : rtc0
> > > > > > > 0078-0cf7 : PCI Bus 0000:00
> > > > > > >    0080-008f : dma page reg
> > > > > > >    00a0-00a1 : pic2
> > > > > > >    00c0-00df : dma2
> > > > > > >    00f0-00ff : fpu
> > > > > > >    03f8-03ff : serial
> > > > > > >    0400-047f : pnp 00:01
> > > > > > >      0400-0403 : ACPI PM1a_EVT_BLK
> > > > > > >      0404-0405 : ACPI PM1a_CNT_BLK
> > > > > > >      0408-040b : ACPI PM_TMR
> > > > > > >      0420-042f : ACPI GPE0_BLK
> > > > > > >      0430-0433 : iTCO_wdt
> > > > > > >      0450-0450 : ACPI PM2_CNT_BLK
> > > > > > >      0460-047f : iTCO_wdt
> > > > > > >    0500-05fe : pnp 00:01
> > > > > > >    0600-061f : pnp 00:01
> > > > > > >    0680-069f : pnp 00:01
> > > > > > > 0cf8-0cff : PCI conf1
> > > > > > > 0d00-ffff : PCI Bus 0000:00
> > > > > > >    1000-1fff : PCI Bus 0000:01
> > > > > > >      1000-10ff : 0000:01:00.0
> > > > > > >        1000-10ff : rtl_pci
> > > > > > >    2000-201f : 0000:00:1f.3
> > > > > > >    2050-2057 : 0000:00:02.0
> > > > > > >
> > > > > > >
> > > > > > > cat /proc/iomem
> > > > > > > 00000000-00000fff : reserved
> > > > > > > 00001000-0006efff : System RAM
> > > > > > > 0006f000-0006ffff : ACPI Non-volatile Storage
> > > > > > > 00070000-00084fff : System RAM
> > > > > > > 00085000-00086fff : reserved
> > > > > > > 00087000-00087fff : System RAM
> > > > > > > 00088000-0009ffff : reserved
> > > > > > > 000a0000-000bffff : PCI Bus 0000:00
> > > > > > > 000c0000-000dffff : PCI Bus 0000:00
> > > > > > > 000e0000-000fffff : PCI Bus 0000:00
> > > > > > >    000f0000-000fffff : System ROM
> > > > > > > 00100000-1effffff : System RAM
> > > > > > >    02000000-027b8537 : Kernel code
> > > > > > >    027b8538-02d2123f : Kernel data
> > > > > > >    02e87000-02fcffff : Kernel bss
> > > > > > > 1f000000-1f0fffff : reserved
> > > > > > > 1f100000-1fffffff : System RAM
> > > > > > > 20000000-200fffff : reserved
> > > > > > > 20100000-75867fff : System RAM
> > > > > > > 75868000-75892fff : reserved
> > > > > > > 75893000-78892fff : System RAM
> > > > > > > 78893000-78922fff : reserved
> > > > > > > 78923000-791a3fff : reserved
> > > > > > > 791a4000-792a2fff : ACPI Non-volatile Storage
> > > > > > > 792a3000-792e2fff : ACPI Tables
> > > > > > > 792e3000-79ffffff : System RAM
> > > > > > > 7a000000-7affffff : RAM buffer
> > > > > > > 7b000000-7effffff : reserved
> > > > > > >    7b000000-7effffff : Graphics Stolen Memory
> > > > > > > 80000000-907ffffe : PCI Bus 0000:00
> > > > > > >    80000000-8fffffff : 0000:00:02.0
> > > > > > >    90000000-903fffff : 0000:00:02.0
> > > > > > >    90400000-904fffff : PCI Bus 0000:01
> > > > > > >      90400000-90403fff : 0000:01:00.0
> > > > > > >        90400000-90403fff : rtl_pci
> > > > > > >    90500000-905fffff : 0000:00:1a.0
> > > > > > >      90500000-905fffff : mei_txe
> > > > > > >    90600000-906fffff : 0000:00:1a.0
> > > > > > >      90600000-906fffff : mei_txe
> > > > > > >    90700000-9070ffff : 0000:00:14.0
> > > > > > >      90700000-9070ffff : xhci-hcd
> > > > > > >    90710000-90713fff : 0000:00:1b.0
> > > > > > >      90710000-90713fff : ICH HD audio
> > > > > > >    90718000-9071801f : 0000:00:1f.3
> > > > > > > 90800000-90800fff : 80860F14:01
> > > > > > >    90800000-90800fff : 80860F14:01
> > > > > > > 90803000-90803fff : 80860F41:00
> > > > > > >    90803000-90803fff : 80860F41:00
> > > > > > > 90804000-90807fff : INTL9C60:01
> > > > > > >    90804000-90807fff : INTL9C60:01
> > > > > > > 90c00000-90ffffff : PCI Bus 0000:00
> > > > > > > e0000000-e3ffffff : PCI MMCONFIG 0000 [bus 00-3f]
> > > > > > >    e00000d0-e00000db : INT33BD:00
> > > > > > >    e00f8000-e00f8fff : reserved
> > > > > > > fec00000-fec003ff : IOAPIC 0
> > > > > > > fed00000-fed003ff : HPET 0
> > > > > > >    fed00000-fed003ff : PNP0103:00
> > > > > > > fed01000-fed01fff : reserved
> > > > > > >    fed01000-fed01fff : pnp 00:03
> > > > > > > fed03000-fed03fff : pnp 00:03
> > > > > > >    fed03008-fed0300c : iTCO_wdt
> > > > > > > fed04000-fed04fff : pnp 00:03
> > > > > > > fed05000-fed057ff : INT3401:00
> > > > > > > fed08000-fed08fff : pnp 00:03
> > > > > > > fed0c000-fed0cfff : INT33FC:00
> > > > > > >    fed0c000-fed0cfff : INT33FC:00
> > > > > > > fed0d000-fed0dfff : INT33FC:01
> > > > > > >    fed0d000-fed0dfff : INT33FC:01
> > > > > > > fed0e000-fed0efff : INT33FC:02
> > > > > > >    fed0e000-fed0efff : INT33FC:02
> > > > > > > fed1c000-fed1cfff : pnp 00:03
> > > > > > > fed40000-fed44fff : pnp 00:01
> > > > > > > fee00000-feefffff : pnp 00:03
> > > > > > >    fee00000-fee00fff : Local APIC
> > > > > > > fef00000-feffffff : pnp 00:03
> > > > > > > ff000000-ffffffff : INT0800:00
> > > > > > >    ffb80000-ffffffff : reserved
> > > > > > >
> > > > > > >
> > > > > > > sudo lspci -vvv
> > > > > > > 00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx
> > > > > > > Series SoC Transaction Register (rev 0e)
> > > > > > > Subsystem: Hewlett-Packard Company Device 8023
> > > > > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > > > > > > Stepping- SERR- FastB2B- DisINTx-
> > > > > > > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> > > > > > > <TAbort- <MAbort- >SERR- <PERR- INTx-
> > > > > > > Latency: 0
> > > > > > > Kernel driver in use: iosf_mbi_pci
> > > > > > >
> > > > > > > 00:02.0 VGA compatible controller: Intel Corporation Atom Processor
> > > > > > > Z36xxx/Z37xxx Series Graphics & Display (rev 0e) (prog-if 00 [VGA
> > > > > > > controller])
> > > > > > > Subsystem: Hewlett-Packard Company Device 8023
> > > > > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > > > > > > Stepping- SERR- FastB2B- DisINTx+
> > > > > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> > > > > > > <TAbort- <MAbort- >SERR- <PERR- INTx-
> > > > > > > Latency: 0
> > > > > > > Interrupt: pin A routed to IRQ 263
> > > > > > > Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4M]
> > > > > > > Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M]
> > > > > > > Region 4: I/O ports at 2050 [size=8]
> > > > > > > Expansion ROM at <unassigned> [disabled]
> > > > > > > Capabilities: [d0] Power Management version 2
> > > > > > > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> > > > > > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> > > > > > > Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
> > > > > > > Address: fee0300c  Data: 4162
> > > > > > > Capabilities: [b0] Vendor Specific Information: Len=07 <?>
> > > > > > > Kernel driver in use: i915
> > > > > > >
> > > > > > > 00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx
> > > > > > > Series USB xHCI (rev 0e) (prog-if 30 [XHCI])
> > > > > > > Subsystem: Hewlett-Packard Company Device 8023
> > > > > > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > > > > > > Stepping- SERR- FastB2B- DisINTx+
> > > > > > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > > > > > > <TAbort- <MAbort- >SERR- <PERR- INTx-
> > > > > > > Latency: 0
> > > > > > > Interrupt: pin A routed to IRQ 261
> > > > > > > Region 0: Memory at 90700000 (64-bit, non-prefetchable) [size=64K]
> > > > > > > Capabilities: [70] Power Management version 2
> > > > > > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> > > > > > > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> > > > > > > Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
> > > > > > > Address: 00000000fee0300c  Data: 41d1
> > > > > > > Kernel driver in use: xhci_hcd
> > > > > > >
> > > > > > > 00:1a.0 Encryption controller: Intel Corporation Atom Processor
> > > > > > > Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0e)
> > > > > > > Subsystem: Hewlett-Packard Company Device 8023
> > > > > > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > > > > > > Stepping- SERR+ FastB2B- DisINTx+
> > > > > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> > > > > > > <TAbort- <MAbort- >SERR- <PERR- INTx-
> > > > > > > Latency: 0, Cache Line Size: 64 bytes
> > > > > > > Interrupt: pin A routed to IRQ 262
> > > > > > > Region 0: Memory at 90600000 (32-bit, non-prefetchable) [size=1M]
> > > > > > > Region 1: Memory at 90500000 (32-bit, non-prefetchable) [size=1M]
> > > > > > > Capabilities: [80] Power Management version 3
> > > > > > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
> > > > > > > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> > > > > > > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
> > > > > > > Address: fee0300c  Data: 4122
> > > > > > > Kernel driver in use: mei_txe
> > > > > > >
> > > > > > > 00:1b.0 Audio device: Intel Corporation Atom Processor Z36xxx/Z37xxx
> > > > > > > Series High Definition Audio Controller (rev 0e)
> > > > > > > Subsystem: Hewlett-Packard Company Device 8023
> > > > > > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > > > > > > Stepping- SERR- FastB2B- DisINTx+
> > > > > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> > > > > > > <TAbort- <MAbort- >SERR- <PERR- INTx-
> > > > > > > Latency: 0, Cache Line Size: 64 bytes
> > > > > > > Interrupt: pin A routed to IRQ 264
> > > > > > > Region 0: Memory at 90710000 (64-bit, non-prefetchable) [size=16K]
> > > > > > > Capabilities: [50] Power Management version 2
> > > > > > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > > > > > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> > > > > > > Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
> > > > > > > Address: 00000000fee0300c  Data: 4182
> > > > > > > Kernel driver in use: snd_hda_intel
> > > > > > >
> > > > > > > 00:1c.0 PCI bridge: Intel Corporation Device 0f48 (rev 0e) (prog-if 00
> > > > > > > [Normal decode])
> > > > > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > > > > > > Stepping- SERR- FastB2B- DisINTx-
> > > > > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> > > > > > > <TAbort- <MAbort- >SERR- <PERR- INTx-
> > > > > > > Latency: 0, Cache Line Size: 64 bytes
> > > > > > > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> > > > > > > I/O behind bridge: 00001000-00001fff
> > > > > > > Memory behind bridge: 90400000-904fffff
> > > > > > > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> > > > > > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> > > > > > > <TAbort- <MAbort+ <SERR- <PERR-
> > > > > > > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> > > > > > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> > > > > > > Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
> > > > > > > DevCap: MaxPayload 128 bytes, PhantFunc 0
> > > > > > > ExtTag- RBE+
> > > > > > > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> > > > > > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> > > > > > > MaxPayload 128 bytes, MaxReadReq 128 bytes
> > > > > > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> > > > > > > LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s
> > > > > > > <512ns, L1 <4us
> > > > > > > ClockPM- Surprise- LLActRep+ BwNot+
> > > > > > > LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
> > > > > > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> > > > > > > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
> > > > > > > BWMgmt+ ABWMgmt-
> > > > > > > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
> > > > > > > Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
> > > > > > > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> > > > > > > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> > > > > > > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> > > > > > > Changed: MRL- PresDet- LinkState+
> > > > > > > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> > > > > > > RootCap: CRSVisible-
> > > > > > > RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> > > > > > > DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not
> > > > > > > Supported ARIFwd-
> > > > > > > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF
> > > > > > > Disabled ARIFwd-
> > > > > > > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> > > > > > >   Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
> > > > > > > ComplianceSOS-
> > > > > > >   Compliance De-emphasis: -6dB
> > > > > > > LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
> > > > > > > EqualizationPhase1-
> > > > > > >   EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> > > > > > > Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
> > > > > > > Address: 00000000  Data: 0000
> > > > > > > Capabilities: [90] Subsystem: Hewlett-Packard Company Device 8023
> > > > > > > Capabilities: [a0] Power Management version 3
> > > > > > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > > > > > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> > > > > > > Kernel driver in use: pcieport
> > > > > > >
> > > > > > > 00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx
> > > > > > > Series Power Control Unit (rev 0e)
> > > > > > > Subsystem: Hewlett-Packard Company Device 8023
> > > > > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > > > > > > Stepping- SERR+ FastB2B- DisINTx-
> > > > > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> > > > > > > <TAbort- <MAbort- >SERR- <PERR- INTx-
> > > > > > > Latency: 0
> > > > > > > Capabilities: [e0] Vendor Specific Information: Len=0c <?>
> > > > > > > Kernel driver in use: lpc_ich
> > > > > > >
> > > > > > > 00:1f.3 SMBus: Intel Corporation Device 0f12 (rev 0e)
> > > > > > > Subsystem: Hewlett-Packard Company Device 8023
> > > > > > > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> > > > > > > Stepping- SERR- FastB2B- DisINTx-
> > > > > > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > > > > > > <TAbort- <MAbort- >SERR- <PERR- INTx-
> > > > > > > Interrupt: pin B routed to IRQ 255
> > > > > > > Region 0: Memory at 90718000 (32-bit, non-prefetchable) [size=32]
> > > > > > > Region 4: I/O ports at 2000 [size=32]
> > > > > > > Capabilities: [50] Power Management version 3
> > > > > > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> > > > > > > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> > > > > > >
> > > > > > > 01:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE
> > > > > > > PCIe Wireless Network Adapter
> > > > > > > Subsystem: Hewlett-Packard Company Device 2231
> > > > > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > > > > > > Stepping- SERR- FastB2B- DisINTx-
> > > > > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> > > > > > > <TAbort- <MAbort- >SERR- <PERR- INTx-
> > > > > > > Latency: 0, Cache Line Size: 64 bytes
> > > > > > > Interrupt: pin A routed to IRQ 16
> > > > > > > Region 0: I/O ports at 1000 [size=256]
> > > > > > > Region 2: Memory at 90400000 (64-bit, non-prefetchable) [size=16K]
> > > > > > > Capabilities: [40] Power Management version 3
> > > > > > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> > > > > > > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> > > > > > > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
> > > > > > > Address: 0000000000000000  Data: 0000
> > > > > > > Capabilities: [70] Express (v2) Endpoint, MSI 00
> > > > > > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
> > > > > > > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> > > > > > > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> > > > > > > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
> > > > > > > MaxPayload 128 bytes, MaxReadReq 512 bytes
> > > > > > > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> > > > > > > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency
> > > > > > > L0s <512ns, L1 <64us
> > > > > > > ClockPM+ Surprise- LLActRep- BwNot-
> > > > > > > LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
> > > > > > > ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> > > > > > > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
> > > > > > > BWMgmt- ABWMgmt-
> > > > > > > DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR+, OBFF
> > > > > > > Via message/WAKE#
> > > > > > > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+, LTR+, OBFF Disabled
> > > > > > > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
> > > > > > >   Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
> > > > > > > ComplianceSOS-
> > > > > > >   Compliance De-emphasis: -6dB
> > > > > > > LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
> > > > > > > EqualizationPhase1-
> > > > > > >   EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> > > > > > > Capabilities: [100 v2] Advanced Error Reporting
> > > > > > > UESta: DLP- SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> > > > > > > MalfTLP- ECRC- UnsupReq- ACSViol-
> > > > > > > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> > > > > > > MalfTLP- ECRC- UnsupReq- ACSViol-
> > > > > > > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
> > > > > > > MalfTLP+ ECRC- UnsupReq- ACSViol-
> > > > > > > CESta: RxErr+ BadTLP- BadDLLP+ Rollover- Timeout- NonFatalErr-
> > > > > > > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> > > > > > > AERCap: First Error Pointer: 0d, GenCap+ CGenEn- ChkCap+ ChkEn-
> > > > > > > Capabilities: [140 v1] Device Serial Number 00-23-b7-fe-ff-4c-e0-00
> > > > > > > Capabilities: [150 v1] Latency Tolerance Reporting
> > > > > > > Max snoop latency: 71680ns
> > > > > > > Max no snoop latency: 71680ns
> > > > > > > Capabilities: [158 v1] L1 PM Substates
> > > > > > > L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
> > > > > > >    PortCommonModeRestoreTime=150us PortTPowerOnTime=150us
> > > > > > > Kernel driver in use: rtl8723be
> > > > > > >
> > > > > > >
> > > > > > > cat /proc/scsi/scsi
> > > > > > > Attached devices:
> > > > > > > Host: scsi0 Channel: 00 Id: 00 Lun: 00
> > > > > > >    Vendor: Generic- Model: SD/MMC/MS PRO    Rev: 1.00
> > > > > > >    Type:   Direct-Access                    ANSI  SCSI revision: 04
> > > > > > >
> > > > > > >
> > > > > > > ls /proc
> > > > > > > 1     12    14    1667  1745  18    1963  2345  292   35    470   55
> > > > > > > 7201  asound     execdomains  kmsg        pagetypeinfo   sysvipc
> > > > > > > 10    1218  1410  1685  1761  1804  2     2388  296   3573  471   554
> > > > > > > 728   buddyinfo  fb           kpagecount  partitions     thread-self
> > > > > > > 1020  125   142   1687  1764  1805  20    24    3     359   473   56
> > > > > > > 755   bus        filesystems  kpageflags  sched_debug    timer_list
> > > > > > > 1025  126   1420  1690  1767  1818  21    25    30    3623  474   57
> > > > > > > 76    cgroups    fs           loadavg     schedstat      timer_stats
> > > > > > > 1032  127   1423  17    1769  1828  2169  2528  31    378   485   585
> > > > > > > 77    cmdline    interrupts   locks       scsi           tty
> > > > > > > 1033  128   143   1701  1771  1853  2187  254   3181  3822  5     606
> > > > > > > 7886  consoles   iomem        mdstat      self           uptime
> > > > > > > 1038  129   1444  1710  1772  1876  2197  26    33    39    509   654
> > > > > > > 8     cpuinfo    ioports      meminfo     slabinfo       version
> > > > > > > 1042  13    1485  1718  1781  1883  2198  2670  3309  3932  516   655
> > > > > > > 8743  crypto     irq          misc        softirqs       vmallocinfo
> > > > > > > 1069  130   15    1722  1787  1893  22    2672  34    40    53    695
> > > > > > > 9     devices    kallsyms     modules     stat           vmstat
> > > > > > > 1070  131   1568  1725  1789  1896  2202  27    3419  41    539   7
> > > > > > > 9040  diskstats  kcore        mounts      swaps          zoneinfo
> > > > > > > 11    132   1645  1727  1792  19    2248  28    3433  468   542   709
> > > > > > > 9056  dma        keys         mtrr        sys
> > > > > > > 1144  1331  1655  1732  1796  1905  23    29    3437  469   5421  715
> > > > > > > acpi  driver     key-users    net         sysrq-trigger
> > > > > > > --
> > > > > > > To unsubscribe from this list: send the line "unsubscribe linux-input" in
> > > > > > > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > > > > > > More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html