Re: [BUG] [PATCH] next: cyapa: fix inop touchpad after resume on Acer C720

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dudley,

On Fri, Nov 28, 2014 at 01:49:15AM +0000, Dudley Du wrote:
> Dmitry,
> 
> Yes, I remebered the discussion, and I said it was working.
> At that time, I though it was the suggestion to my patches, so I merged the solution to my pathces,
> and verified on my pathces. But did not run test on the patch you attached.
> Sorry for the misunderstood and the troubles to you. :)

Sorry I was not clear in my request. Anyway, I just applied the patch
(with a minor edit) and pushed it out. It shoudl make it's way into next
today or tomorrow.

Thanks.

> 
> Regards,
> Dudley
> 
> > -----Original Message-----
> > From: Dmitry Torokhov [mailto:dmitry.torokhov@xxxxxxxxx]
> > Sent: 2014年11月28日 2:16
> > To: Dudley Du; 'Jeremiah Mahler'
> > Cc: linux-kernel@xxxxxxxxxxxxxxx; Dudley Du
> > Subject: RE: [BUG] [PATCH] next: cyapa: fix inop touchpad after resume on Acer
> > C720
> >
> > On November 26, 2014 9:45:49 PM PST, Dudley Du <dudley.dulixin@xxxxxxxxx>
> > wrote:
> > >Jeremiah,
> > >
> > >I didn't make the special patch for the linux-next before, so I don't
> > >know why
> > >this patch is there and have issue.
> >
> > That was the patch we've discussed some times back and you mentioned it was
> > working for you so I applied it to next.
> >
> > I'll make sure to apply the fixup promptly.
> >
> > >Based on current code in the linux-next, I made below patch to fix this
> > >issue.
> > >Could you please try again with attached patch fix.
> > >
> > >Thanks,
> > >Dudley
> > >
> > >> -----Original Message-----
> > >> From: Jeremiah Mahler [mailto:jmmahler@xxxxxxxxx]
> > >> Sent: 2014?11?27? 4:03
> > >> To: Dudley Du
> > >> Cc: linux-kernel@xxxxxxxxxxxxxxx
> > >> Subject: Re: [BUG] [PATCH] next: cyapa: fix inop touchpad after
> > >resume on Acer
> > >> C720
> > >>
> > >> Dudley,
> > >>
> > >> On Wed, Nov 26, 2014 at 06:16:00AM +0000, Dudley Du wrote:
> > >> > More info: I did all testings based on kernel 3.14.0 on Acer C70.
> > >> >
> > >>
> > >> I am testing with linux-next 3.18-rc6 on an Acer C720.
> > >>
> > >> http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/
> > >>
> > >> > Thanks,
> > >> > Dudley
> > >> >
> > >> []
> > >>
> > >> --
> > >> - Jeremiah Mahler
> > >
> > >From bb717b1c1525ef6b889f0ef735d920eed9e76e72 Mon Sep 17 00:00:00 2001
> > >From: Dudley Du <dudley.dulixin@xxxxxxxxx>
> > >Date: Thu, 27 Nov 2014 13:35:09 +0800
> > >Subject: [PATCH] input: cyapa: fix irq error issue in cyapa_resume
> > >To: dmitry.torokhov@xxxxxxxxx,
> > >    jmmahler@xxxxxxxxx
> > >Cc: bleung@xxxxxxxxxx,
> > >    linux-input@xxxxxxxxxxxxxxx
> > >
> > >This patch is aimed to fix the irq error happened on cyapa_resume when
> > >doing suspend/resume testing.
> > >The root cause of this issue is that the cyapa->irq has been removed
> > >but
> > >still used in the driver.
> > >
> > >Signed-off-by: Dudley Du <dudley.dulixin@xxxxxxxxx>
> > >---
> > > drivers/input/mouse/cyapa.c | 6 +++---
> > > 1 file changed, 3 insertions(+), 3 deletions(-)
> > >
> > >diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
> > >index c84a9eb..caaba7b 100644
> > >--- a/drivers/input/mouse/cyapa.c
> > >+++ b/drivers/input/mouse/cyapa.c
> > >@@ -938,7 +938,7 @@ static int __maybe_unused cyapa_suspend(struct
> > >device *dev)
> > >  power_mode, error);
> > >
> > > if (device_may_wakeup(dev))
> > >-cyapa->irq_wake = (enable_irq_wake(cyapa->irq) == 0);
> > >+cyapa->irq_wake = (enable_irq_wake(cyapa->client->irq) == 0);
> > >
> > > mutex_unlock(&input->mutex);
> > >
> > >@@ -956,7 +956,7 @@ static int __maybe_unused cyapa_resume(struct
> > >device *dev)
> > > mutex_lock(&input->mutex);
> > >
> > > if (device_may_wakeup(dev) && cyapa->irq_wake)
> > >-disable_irq_wake(cyapa->irq);
> > >+disable_irq_wake(cyapa->client->irq);
> > >
> > > power_mode = input->users ? PWR_MODE_FULL_ACTIVE : PWR_MODE_OFF;
> > > error = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE);
> > >@@ -964,7 +964,7 @@ static int __maybe_unused cyapa_resume(struct
> > >device *dev)
> > > dev_warn(dev, "resume: set power mode to %d failed: %d\n",
> > >  power_mode, error);
> > >
> > >-enable_irq(cyapa->irq);
> > >+enable_irq(cyapa->client->irq);
> > >
> > > mutex_unlock(&input->mutex);
> > >
> >
> > Hi Dudley,
> > Thanks.
> >
> > --
> > Dmitry
> 
> This message and any attachments may contain Cypress (or its subsidiaries) confidential information. If it has been received in error, please advise the sender and immediately delete this message.

-- 
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux