i2c devices match against struct i2c_device_id
even for CONFIG_OF case, so adding a struct of_device_id
doesn't change anything. As a result, currently, edt-ft5x06
will not autoprobe if built as a module.
To fix the issue and still maintain backwards compatibility
with all DTS files currently in tree, we're just moving
all ids from of_device_id to i2c_device_id while also
adding the following specific ids which should be used
from now on:
{ "edt-ft5206", 0, }
{ "edt-ft5306", 0, }
{ "edt-ft5406", 0, }
Cc: Lothar Waßmann <lw@xxxxxxxxxxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Cc: <devicetree@xxxxxxxxxxxxxxx>
Cc: <linux-input@xxxxxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # v3.15+
Fixes: dac90dc2 (Input: edt-ft5x06 - add DT support)
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
.../bindings/input/touchscreen/edt-ft5x06.txt | 9 ++++++---
drivers/input/touchscreen/edt-ft5x06.c | 17 ++++++-----------
2 files changed, 12 insertions(+), 14 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
index 76db967..50bd5d2 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
@@ -14,9 +14,12 @@ bindings.
Required properties:
- - compatible: "edt,edt-ft5206"
- or: "edt,edt-ft5306"
- or: "edt,edt-ft5406"
+ - compatible: "edt-ft5206"
+ or: "edt-ft5306"
+ or: "edt-ft5406"
+ or: "edt,edt-ft5206" (deprecated)
+ or: "edt,edt-ft5306" (deprecated)
+ or: "edt,edt-ft5406" (deprecated)
- reg: I2C slave address of the chip (0x38)
- interrupt-parent: a phandle pointing to the interrupt controller
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index ee3434f..f161ff9 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -1119,25 +1119,20 @@ static SIMPLE_DEV_PM_OPS(edt_ft5x06_ts_pm_ops,
static const struct i2c_device_id edt_ft5x06_ts_id[] = {
{ "edt-ft5x06", 0, },
+ { "edt-ft5206", 0, },
+ { "edt-ft5306", 0, },
+ { "edt-ft5406", 0, },
+ { "edt,edt-ft5206", 0, },
+ { "edt,edt-ft5306", 0, },
+ { "edt,edt-ft5406", 0, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(i2c, edt_ft5x06_ts_id);
-#ifdef CONFIG_OF
-static const struct of_device_id edt_ft5x06_of_match[] = {
- { .compatible = "edt,edt-ft5206", },
- { .compatible = "edt,edt-ft5306", },
- { .compatible = "edt,edt-ft5406", },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, edt_ft5x06_of_match);
-#endif
-
static struct i2c_driver edt_ft5x06_ts_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "edt_ft5x06",
- .of_match_table = of_match_ptr(edt_ft5x06_of_match),
.pm = &edt_ft5x06_ts_pm_ops,
},
.id_table = edt_ft5x06_ts_id,
--
2.1.0.GIT
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
