[PATCH] HID: usbhid: get/put around clearing needs_remote_wakeup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



usbhid->intf->needs_remote_wakeup is set when a device is
opened, and is cleared when a device is closed.

When a usbhid device that does not support remote wake
( i.e. !device_can_wakeup() ) is closed, we fail out of
autosuspend_check() because the autosuspend check is called
before the flag is cleared as a result of usb_kill_urb(usbhid->urbin);

The result is that a device that may otherwise autosuspend will
fail to enter suspend again after all handles to it are closed.

In usbhid_open, usb_autopm_get_interface is called
before setting the needs_remote_wakeup flag, and
usb_autopm_put_interface is called after hid_start_in.

However, when the device is closed in usbhid_close, the same
protection isn't there when clearing needs_remote_wakeup. This will
add that to usbhid_close as well as usbhid_stop.

Signed-off-by: Benson Leung <bleung@xxxxxxxxxxxx>
---
 drivers/hid/usbhid/hid-core.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 04e34b9..2a0b91d 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -734,8 +734,15 @@ void usbhid_close(struct hid_device *hid)
 		spin_unlock_irq(&usbhid->lock);
 		hid_cancel_delayed_stuff(usbhid);
 		if (!(hid->quirks & HID_QUIRK_ALWAYS_POLL)) {
+			int autopm_error;
+
+			autopm_error = usb_autopm_get_interface(usbhid->intf);
+
 			usb_kill_urb(usbhid->urbin);
 			usbhid->intf->needs_remote_wakeup = 0;
+
+			if (!autopm_error)
+				usb_autopm_put_interface(usbhid->intf);
 		}
 	} else {
 		spin_unlock_irq(&usbhid->lock);
@@ -1179,9 +1186,17 @@ static void usbhid_stop(struct hid_device *hid)
 	if (WARN_ON(!usbhid))
 		return;
 
-	if (hid->quirks & HID_QUIRK_ALWAYS_POLL)
+	if (hid->quirks & HID_QUIRK_ALWAYS_POLL) {
+		int autopm_error;
+
+		autopm_error = usb_autopm_get_interface(usbhid->intf);
+
 		usbhid->intf->needs_remote_wakeup = 0;
 
+		if (!autopm_error)
+			usb_autopm_put_interface(usbhid->intf);
+	}
+
 	clear_bit(HID_STARTED, &usbhid->iofl);
 	spin_lock_irq(&usbhid->lock);	/* Sync with error and led handlers */
 	set_bit(HID_DISCONNECTED, &usbhid->iofl);
-- 
2.1.0.rc2.206.gedb03e5

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux