Re: [PATCH v3] psmouse: Add some support for the FocalTech PS/2 protocol extensions.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 31.10.2014 um 14:29 schrieb Hans de Goede:
> Hi Mathias,
>
> Thanks for your continued work on this. 3 remarks online + 1 at the bottom.
>
> On 10/30/2014 07:33 PM, Mathias Gottschlag wrote:
>> Most of the protocol for these touchpads has been reverse engineered. This
>> commit adds a basic multitouch-capable driver.
>>
>> A lot of the protocol is still unknown. Especially, we don't know how to
>> identify the device yet apart from the PNP ID.
>>
>> The previous workaround for these devices has been left in place in case
>> the driver is not compiled into the kernel or in case some other device
>> with the same PNP ID is not recognized by the driver yet still has the
>> same
>> problems with the device probing code.
> Missing "Signed-off-by: Mathias Gottschlag <mgottschlag@xxxxxxxxx>", we need
> this before this patch can be merged (just put it at the end of the commit
> message (official end, before the changelog) when you send the next version).
>
>
>> ---
>>
>> (Sorry, some serious incompetence caused me to always test an old
>> version of the module, so I overlooked an embarrasing pagefault right
>> during initialization, where memory allocation did not happen early
>> enough)
>>
>> Thanks for the first round of review, I hope I addressed all comments.
>> Changes compared to the last version:
>> - The detection code does not compare all registers anymore.
>> - The driver now reads the size of the touchpad during initialization.
>> This should add support for Asus X450JN, where the touchpad is a bit
>> wider.
>> - set_input_params has been simplified.
>> - fingers are now valid=0 when the touchpad reports a large object.
>>
>>  drivers/input/mouse/Kconfig        |  10 ++
>>  drivers/input/mouse/focaltech.c    | 300
>> ++++++++++++++++++++++++++++++++++++-
> Your mail client has line-wrapped this line, and many others further below,
> making it impossible to apply this, please resend using "git send-email" .
>
>>  drivers/input/mouse/focaltech.h    |  60 ++++++++
>>  drivers/input/mouse/psmouse-base.c |  32 ++--
>>  drivers/input/mouse/psmouse.h      |   1 +
>>  5 files changed, 386 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
>> index 366fc7a..db973e5 100644
>> --- a/drivers/input/mouse/Kconfig
>> +++ b/drivers/input/mouse/Kconfig
>> @@ -146,6 +146,16 @@ config MOUSE_PS2_OLPC
>>   	  If unsure, say N.
>>  +config MOUSE_PS2_FOCALTECH
>> +	bool "FocalTech PS/2 mouse protocol extension" if EXPERT
>> +	default y
>> +	depends on MOUSE_PS2
>> +	help
>> +	  Say Y here if you have a FocalTech PS/2 TouchPad connected to
>> +	  your system.
>> +
>> +	  If unsure, say Y.
>> +
>>  config MOUSE_SERIAL
>>  	tristate "Serial mouse"
>>  	select SERIO
>> diff --git a/drivers/input/mouse/focaltech.c
>> b/drivers/input/mouse/focaltech.c
>> index f4d657e..26bc5b7 100644
>> --- a/drivers/input/mouse/focaltech.c
>> +++ b/drivers/input/mouse/focaltech.c
>> @@ -2,6 +2,7 @@
>>   * Focaltech TouchPad PS/2 mouse driver
>>   *
>>   * Copyright (c) 2014 Red Hat Inc.
>> + * Copyright (c) 2014 Mathias Gottschlag <mgottschlag@xxxxxxxxx>
>>   *
>>   * This program is free software; you can redistribute it and/or modify
>>   * it under the terms of the GNU General Public License as published by
>> @@ -13,15 +14,14 @@
>>   * Hans de Goede <hdegoede@xxxxxxxxxx>
>>   */
>>  -/*
>> - * The Focaltech PS/2 touchpad protocol is unknown. This drivers
>> deals with
>> - * detection only, to avoid further detection attempts confusing the
>> touchpad
>> - * this way it at least works in PS/2 mouse compatibility mode.
>> - */
>>   #include <linux/device.h>
>>  #include <linux/libps2.h>
>> +#include <linux/input/mt.h>
>> +#include <linux/serio.h>
>> +#include <linux/slab.h>
>>  #include "psmouse.h"
>> +#include "focaltech.h"
>>   static const char * const focaltech_pnp_ids[] = {
>>  	"FLT0101",
>> @@ -30,6 +30,12 @@ static const char * const focaltech_pnp_ids[] = {
>>  	NULL
>>  };
>>  +/*
>> + * Even if the kernel is built without support for Focaltech PS/2
>> touchpads (or
>> + * when the real driver fails to recognize the device), we still have
>> to detect
>> + * them in order to avoid further detection attempts confusing the
>> touchpad.
>> + * This way it at least works in PS/2 mouse compatibility mode.
>> + */
>>  int focaltech_detect(struct psmouse *psmouse, bool set_properties)
>>  {
>>  	if (!psmouse_matches_pnp_id(psmouse, focaltech_pnp_ids))
>> @@ -37,16 +43,296 @@ int focaltech_detect(struct psmouse *psmouse,
>> bool set_properties)
>>   	if (set_properties) {
>>  		psmouse->vendor = "FocalTech";
>> -		psmouse->name = "FocalTech Touchpad in mouse emulation mode";
>> +		psmouse->name = "FocalTech Touchpad";
>>  	}
>>   	return 0;
>>  }
>>  -int focaltech_init(struct psmouse *psmouse)
>> +static void focaltech_reset(struct psmouse *psmouse)
>>  {
>>  	ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
>>  	psmouse_reset(psmouse);
>> +}
>> +
>> +#ifdef CONFIG_MOUSE_PS2_FOCALTECH
>> +
>> +static void focaltech_report_state(struct psmouse *psmouse)
>> +{
>> +	int i;
>> +	struct focaltech_data *priv = psmouse->private;
>> +	struct focaltech_hw_state *state = &priv->state;
>> +	struct input_dev *dev = psmouse->dev;
>> +	int finger_count = 0;
>> +
>> +	for (i = 0; i < FOC_MAX_FINGERS; i++) {
>> +		struct focaltech_finger_state *finger = &state->fingers[i];
>> +		int active = finger->active && finger->valid;
>> +		input_mt_slot(dev, i);
>> +		input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
>> +		if (active) {
>> +			finger_count++;
>> +			input_report_abs(dev, ABS_MT_POSITION_X, finger->x);
>> +			input_report_abs(dev, ABS_MT_POSITION_Y,
>> +					focaltech_invert_y(finger->y));
>> +		}
>> +	}
>> +	input_mt_report_pointer_emulation(dev, finger_count);
>> +
>> +	input_report_key(psmouse->dev, BTN_LEFT, state->pressed);
>> +	input_sync(psmouse->dev);
>> +}
>> +
>> +static void process_touch_packet(struct focaltech_hw_state *state,
>> +		unsigned char *packet)
>> +{
>> +	int i;
>> +	unsigned char fingers = packet[1];
>> +
>> +	state->pressed = (packet[0] >> 4) & 1;
>> +	/* the second byte contains a bitmap of all fingers touching the pad */
>> +	for (i = 0; i < FOC_MAX_FINGERS; i++) {
>> +		if ((fingers & 0x1) && !state->fingers[i].active) {
>> +			/* we do not have a valid position for the finger yet */
>> +			state->fingers[i].valid = 0;
>> +		}
>> +		state->fingers[i].active = fingers & 0x1;
>> +		fingers >>= 1;
>> +	}
>> +}
>> +
>> +static void process_abs_packet(struct focaltech_hw_state *state,
>> +		unsigned char *packet)
>> +{
>> +	unsigned int finger = (packet[1] >> 4) - 1;
>> +
>> +	state->pressed = (packet[0] >> 4) & 1;
>> +	if (finger >= FOC_MAX_FINGERS)
>> +		return;
>> +	/*
>> +	 * packet[5] contains some kind of tool size in the most significant
>> +	 * nibble. 0xff is a special value (latching) that signals a large
>> +	 * contact area.
>> +	 */
>> +	if (packet[5] == 0xff) {
>> +		state->fingers[finger].valid = 0;
>> +		return;
>> +	}
>> +	state->fingers[finger].x = ((packet[1] & 0xf) << 8) | packet[2];
>> +	state->fingers[finger].y = (packet[3] << 8) | packet[4];
>> +	state->fingers[finger].valid = 1;
>> +}
>> +static void process_rel_packet(struct focaltech_hw_state *state,
>> +		unsigned char *packet)
>> +{
>> +	int finger1 = ((packet[0] >> 4) & 0x7) - 1;
>> +	int finger2 = ((packet[3] >> 4) & 0x7) - 1;
>> +
>> +	state->pressed = packet[0] >> 7;
>> +	if (finger1 < FOC_MAX_FINGERS) {
>> +		state->fingers[finger1].x += (char)packet[1];
>> +		state->fingers[finger1].y += (char)packet[2];
>> +	}
>> +	/*
>> +	 * If there is an odd number of fingers, the last relative packet only
>> +	 * contains one finger. In this case, the second finger index in the
>> +	 * packet is 0 (we subtract 1 in the lines above to create array
>> +	 * indices).
>> +	 */
>> +	if (finger2 != -1 && finger2 < FOC_MAX_FINGERS) {
>> +		state->fingers[finger2].x += (char)packet[4];
>> +		state->fingers[finger2].y += (char)packet[5];
>> +	}
>> +}
>> +
>> +static void focaltech_process_packet(struct psmouse *psmouse)
>> +{
>> +	struct focaltech_data *priv = psmouse->private;
>> +	unsigned char *packet = psmouse->packet;
>> +
>> +	switch (packet[0] & 0xf) {
>> +	case FOC_TOUCH:
>> +		process_touch_packet(&priv->state, packet);
>> +		break;
>> +	case FOC_ABS:
>> +		process_abs_packet(&priv->state, packet);
>> +		break;
>> +	case FOC_REL:
>> +		process_rel_packet(&priv->state, packet);
>> +		break;
>> +	default:
>> +		psmouse_err(psmouse, "Unknown packet type: %02x", packet[0]);
>> +		break;
>> +	}
>> +
>> +	focaltech_report_state(psmouse);
>> +}
>> +
>> +static psmouse_ret_t focaltech_process_byte(struct psmouse *psmouse)
>> +{
>> +	if (psmouse->pktcnt >= 6) { /* Full packet received */
>> +		focaltech_process_packet(psmouse);
>> +		return PSMOUSE_FULL_PACKET;
>> +	}
>> +	/*
>> +	 * we might want to do some validation of the data here, but we do not
>> +	 * know the protocoll well enough
>> +	 */
>> +	return PSMOUSE_GOOD_DATA;
>> +}
>> +
>> +static int focaltech_switch_protocol(struct psmouse *psmouse)
>> +{
>> +	struct ps2dev *ps2dev = &psmouse->ps2dev;
>> +	unsigned char param[3];
>> +
>> +	param[0] = 0;
>> +	if (ps2_command(ps2dev, param, 0x10f8))
>> +		return -EIO;
>> +	if (ps2_command(ps2dev, param, 0x10f8))
>> +		return -EIO;
>> +	if (ps2_command(ps2dev, param, 0x10f8))
>> +		return -EIO;
>> +	param[0] = 1;
>> +	if (ps2_command(ps2dev, param, 0x10f8))
>> +		return -EIO;
>> +	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETSCALE11))
>> +		return -EIO;
>> +
>> +	if (ps2_command(ps2dev, param, PSMOUSE_CMD_ENABLE))
>> +		return -EIO;
>>   	return 0;
>>  }
>> +
>> +static void focaltech_disconnect(struct psmouse *psmouse)
>> +{
>> +	focaltech_reset(psmouse);
>> +	kfree(psmouse->private);
>> +	psmouse->private = NULL;
>> +}
>> +
>> +static int focaltech_reconnect(struct psmouse *psmouse)
>> +{
>> +	focaltech_reset(psmouse);
>> +	if (focaltech_switch_protocol(psmouse)) {
>> +		psmouse_err(psmouse,
>> +			    "Unable to initialize the device.");
>> +		return -1;
>> +	}
>> +	return 0;
>> +}
>> +
>> +static void set_input_params(struct psmouse *psmouse)
>> +{
>> +	struct input_dev *dev = psmouse->dev;
>> +	struct focaltech_data *priv = psmouse->private;
>> +
>> +	__set_bit(EV_ABS, dev->evbit);
>> +	input_set_abs_params(dev, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0);
>> +	input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0);
>> +	input_mt_init_slots(dev, 5, INPUT_MT_POINTER);
>> +	__clear_bit(EV_REL, dev->evbit);
>> +	__clear_bit(REL_X, dev->relbit);
>> +	__clear_bit(REL_Y, dev->relbit);
>> +	__clear_bit(BTN_RIGHT, dev->keybit);
>> +	__clear_bit(BTN_MIDDLE, dev->keybit);
>> +	__set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
>> +}
>> +
>> +static int focaltech_read_register(struct ps2dev *ps2dev, int reg,
>> +		unsigned char *param)
>> +{
>> +	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETSCALE11))
>> +		return -1;
>> +	param[0] = 0;
>> +	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
>> +		return -1;
>> +	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
>> +		return -1;
>> +	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
>> +		return -1;
>> +	param[0] = reg;
>> +	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
>> +		return -1;
>> +	if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
>> +		return -1;
>> +	return 0;
>> +}
>> +
>> +static int focaltech_read_size(struct psmouse *psmouse)
>> +{
>> +	struct ps2dev *ps2dev = &psmouse->ps2dev;
>> +	struct focaltech_data *priv = psmouse->private;
>> +	char param[3];
>> +
>> +	if (focaltech_read_register(ps2dev, 2, param))
>> +		return -EIO;
>> +	/* not sure whether this is 100% correct */
>> +	priv->x_max = (unsigned char)param[1] * 128;
>> +	priv->y_max = (unsigned char)param[2] * 128;
> Hmm, I assume it is 99% correct for the X450 and X550 ?  In that case this is
> good enough for now.
It seems to be correct for Asus R405LD, X450, K750 (=X750?), UX303. Good
enough, or should I wait for more feedback? I am currently trying to get
more information for X200 and N550.
>
>> +
>> +	return 0;
>> +}
>> +int focaltech_init(struct psmouse *psmouse)
>> +{
>> +	struct focaltech_data *priv;
>> +	int err;
>> +
>> +	psmouse->private = priv = kzalloc(sizeof(struct focaltech_data),
>> GFP_KERNEL);
>> +	if (!priv)
>> +		return -ENOMEM;
>> +
>> +	focaltech_reset(psmouse);
>> +	if (focaltech_read_size(psmouse)) {
>> +		focaltech_reset(psmouse);
>> +		psmouse_err(psmouse,
>> +			    "Unable to read the size of the touchpad.");
>> +		err = -ENOSYS;
>> +		goto fail;
>> +	}
>> +	if (focaltech_switch_protocol(psmouse)) {
>> +		focaltech_reset(psmouse);
>> +		psmouse_err(psmouse,
>> +			    "Unable to initialize the device.");
>> +		err = -ENOSYS;
>> +		goto fail;
>> +	}
>> +
>> +	set_input_params(psmouse);
>> +
>> +	psmouse->protocol_handler = focaltech_process_byte;
>> +	psmouse->pktsize = 6;
>> +	psmouse->disconnect = focaltech_disconnect;
>> +	psmouse->reconnect = focaltech_reconnect;
>> +	psmouse->cleanup = focaltech_reset;
>> +	/* resync is not supported yet */
>> +	psmouse->resync_time = 0;
>> +
>> +	return 0;
>> +fail:
>> +	focaltech_reset(psmouse);
>> +	kfree(priv);
>> +	return err;
>> +}
>> +
>> +bool focaltech_supported(void)
>> +{
>> +	return true;
>> +}
>> +
>> +#else /* CONFIG_MOUSE_PS2_FOCALTECH */
>> +
>> +int focaltech_init(struct psmouse *psmouse)
>> +{
>> +	focaltech_reset(psmouse);
>> +
>> +	return 0;
>> +}
>> +
>> +bool focaltech_supported(void)
>> +{
>> +	return false;
>> +}
>> +
>> +#endif /* CONFIG_MOUSE_PS2_FOCALTECH */
>> diff --git a/drivers/input/mouse/focaltech.h
>> b/drivers/input/mouse/focaltech.h
>> index 498650c..68c5cfc 100644
>> --- a/drivers/input/mouse/focaltech.h
>> +++ b/drivers/input/mouse/focaltech.h
>> @@ -2,6 +2,7 @@
>>   * Focaltech TouchPad PS/2 mouse driver
>>   *
>>   * Copyright (c) 2014 Red Hat Inc.
>> + * Copyright (c) 2014 Mathias Gottschlag <mgottschlag@xxxxxxxxx>
>>   *
>>   * This program is free software; you can redistribute it and/or modify
>>   * it under the terms of the GNU General Public License as published by
>> @@ -16,7 +17,66 @@
>>  #ifndef _FOCALTECH_H
>>  #define _FOCALTECH_H
>>  +/*
>> + * Packet types - the numbers are not consecutive, so we might be missing
>> + * something here.
>> + */
>> +#define FOC_TOUCH 0x3 /* bitmap of active fingers */
>> +#define FOC_ABS 0x6 /* absolute position of one finger */
>> +#define FOC_REL 0x9 /* relative position of 1-2 fingers */
>> +
>> +#define FOC_MAX_FINGERS 5
>> +
>> +#define FOC_MAX_X 2431
>> +#define FOC_MAX_Y 1663
>> +
>> +static inline int focaltech_invert_y(int y)
>> +{
>> +	return FOC_MAX_Y - y;
>> +}
>> +
>> +/*
>> + * Current state of a single finger on the touchpad.
>> + */
>> +struct focaltech_finger_state {
>> +	/* the touchpad has generated a touch event for the finger */
>> +	bool active;
>> +	/*
>> +	 * The touchpad has sent position data for the finger. Touch event
>> +	 * packages reset this flag for new fingers, and there is a time
>> +	 * between the first touch event and the following absolute position
>> +	 * packet for the finger where the touchpad has declared the finger to
>> +	 * be valid, but we do not have any valid position yet.
>> +	 */
>> +	bool valid;
>> +	/* absolute position (from the bottom left corner) of the finger */
>> +	unsigned int x;
>> +	unsigned int y;
>> +};
>> +
>> +/*
>> + * Description of the current state of the touchpad hardware.
>> + */
>> +struct focaltech_hw_state {
>> +	/*
>> +	 * The touchpad tracks the positions of the fingers for us, the array
>> +	 * indices correspond to the finger indices returned in the report
>> +	 * packages.
>> +	 */
>> +	struct focaltech_finger_state fingers[FOC_MAX_FINGERS];
>> +	/*
>> +	 * True if the clickpad has been pressed.
>> +	 */
>> +	bool pressed;
>> +};
>> +
>> +struct focaltech_data {
>> +	unsigned int x_max, y_max;
>> +	struct focaltech_hw_state state;
>> +};
>> +
>>  int focaltech_detect(struct psmouse *psmouse, bool set_properties);
>>  int focaltech_init(struct psmouse *psmouse);
>> +bool focaltech_supported(void);
>>   #endif
>> diff --git a/drivers/input/mouse/psmouse-base.c
>> b/drivers/input/mouse/psmouse-base.c
>> index 26994f6..4a9de33 100644
>> --- a/drivers/input/mouse/psmouse-base.c
>> +++ b/drivers/input/mouse/psmouse-base.c
>> @@ -725,16 +725,19 @@ static int psmouse_extensions(struct psmouse
>> *psmouse,
>>   /* Always check for focaltech, this is safe as it uses pnp-id
>> matching */
>>  	if (psmouse_do_detect(focaltech_detect, psmouse, set_properties) == 0) {
>> -		if (!set_properties || focaltech_init(psmouse) == 0) {
>> -			/*
>> -			 * Not supported yet, use bare protocol.
>> -			 * Note that we need to also restrict
>> -			 * psmouse_max_proto so that psmouse_initialize()
>> -			 * does not try to reset rate and resolution,
>> -			 * because even that upsets the device.
>> -			 */
>> -			psmouse_max_proto = PSMOUSE_PS2;
>> -			return PSMOUSE_PS2;
>> +		if (max_proto > PSMOUSE_IMEX) {
>> +			if (!set_properties || focaltech_init(psmouse) == 0) {
>> +				if (focaltech_supported())
>> +					return PSMOUSE_FOCALTECH;
>> +				/*
>> +				 * Note that we need to also restrict
>> +				 * psmouse_max_proto so that psmouse_initialize()
>> +				 * does not try to reset rate and resolution,
>> +				 * because even that upsets the device.
>> +				 */
>> +				psmouse_max_proto = PSMOUSE_PS2;
>> +				return PSMOUSE_PS2;
>> +			}
>>  		}
>>  	}
>>  @@ -1063,6 +1066,15 @@ static const struct psmouse_protocol
>> psmouse_protocols[] = {
>>  		.alias		= "cortps",
>>  		.detect		= cortron_detect,
>>  	},
>> +#ifdef CONFIG_MOUSE_PS2_FOCALTECH
>> +	{
>> +		.type		= PSMOUSE_FOCALTECH,
>> +		.name		= "FocalTechPS/2",
>> +		.alias		= "focaltech",
>> +		.detect		= focaltech_detect,
>> +		.init		= focaltech_init,
>> +	},
>> +#endif
>>  	{
>>  		.type		= PSMOUSE_AUTO,
>>  		.name		= "auto",
>> diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h
>> index f4cf664..c2ff137 100644
>> --- a/drivers/input/mouse/psmouse.h
>> +++ b/drivers/input/mouse/psmouse.h
>> @@ -96,6 +96,7 @@ enum psmouse_type {
>>  	PSMOUSE_FSP,
>>  	PSMOUSE_SYNAPTICS_RELATIVE,
>>  	PSMOUSE_CYPRESS,
>> +	PSMOUSE_FOCALTECH,
>>  	PSMOUSE_AUTO		/* This one should always be last */
>>  };
>>  -- 1.9.1
>>
> Overall looks good, assuming the answer to my question about x_max / y_max is "yes",
> then you may add:
>
> Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
>
> After your Signed-off-by when you submit v4 (we need a v4 because of the line wrapping
> issue).
>
> Regards,
>
> Hans


--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux