[PATCH v5 1/3] cap11xx: make driver generic for variant support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



cap1106 driver can support much more one device make the driver
generic for support of similiar parts.

Signed-off-by: Matt Ranostay <mranostay@xxxxxxxxx>
---
 .../bindings/input/{cap1106.txt => cap11xx.txt}    |   5 +-
 drivers/input/keyboard/Kconfig                     |   8 +-
 drivers/input/keyboard/Makefile                    |   2 +-
 drivers/input/keyboard/cap1106.c                   | 341 ---------------------
 drivers/input/keyboard/cap11xx.c                   | 340 ++++++++++++++++++++
 5 files changed, 348 insertions(+), 348 deletions(-)
 rename Documentation/devicetree/bindings/input/{cap1106.txt => cap11xx.txt} (89%)
 delete mode 100644 drivers/input/keyboard/cap1106.c
 create mode 100644 drivers/input/keyboard/cap11xx.c

diff --git a/Documentation/devicetree/bindings/input/cap1106.txt b/Documentation/devicetree/bindings/input/cap11xx.txt
similarity index 89%
rename from Documentation/devicetree/bindings/input/cap1106.txt
rename to Documentation/devicetree/bindings/input/cap11xx.txt
index 4b46390..738f5f3 100644
--- a/Documentation/devicetree/bindings/input/cap1106.txt
+++ b/Documentation/devicetree/bindings/input/cap11xx.txt
@@ -1,11 +1,12 @@
-Device tree bindings for Microchip CAP1106, 6 channel capacitive touch sensor
+Device tree bindings for Microchip CAP1106 based capacitive touch sensor
 
 The node for this driver must be a child of a I2C controller node, as the
 device communication via I2C only.
 
 Required properties:
 
-	compatible:		Must be "microchip,cap1106"
+	compatible:		Must be on the following, depending on the model:
+					"microchip,cap1106"
 
 	reg:			The I2C slave address of the device.
 				Only 0x28 is valid.
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index a3958c6..96ee26c 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -665,14 +665,14 @@ config KEYBOARD_CROS_EC
 	  To compile this driver as a module, choose M here: the
 	  module will be called cros_ec_keyb.
 
-config KEYBOARD_CAP1106
-	tristate "Microchip CAP1106 touch sensor"
+config KEYBOARD_CAP11XX
+	tristate "Microchip CAP11XX based touch sensors"
 	depends on OF && I2C
 	select REGMAP_I2C
 	help
-	  Say Y here to enable the CAP1106 touch sensor driver.
+	  Say Y here to enable the CAP11XX touch sensor driver.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called cap1106.
+	  module will be called cap11xx.
 
 endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 0a33456..febafa5 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -11,7 +11,7 @@ obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
 obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
 obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
 obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
-obj-$(CONFIG_KEYBOARD_CAP1106)		+= cap1106.o
+obj-$(CONFIG_KEYBOARD_CAP11XX)		+= cap11xx.o
 obj-$(CONFIG_KEYBOARD_CLPS711X)		+= clps711x-keypad.o
 obj-$(CONFIG_KEYBOARD_CROS_EC)		+= cros_ec_keyb.o
 obj-$(CONFIG_KEYBOARD_DAVINCI)		+= davinci_keyscan.o
diff --git a/drivers/input/keyboard/cap1106.c b/drivers/input/keyboard/cap1106.c
deleted file mode 100644
index d70b65a..0000000
--- a/drivers/input/keyboard/cap1106.c
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
- * Input driver for Microchip CAP1106, 6 channel capacitive touch sensor
- *
- * http://www.microchip.com/wwwproducts/Devices.aspx?product=CAP1106
- *
- * (c) 2014 Daniel Mack <linux@xxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/of_irq.h>
-#include <linux/regmap.h>
-#include <linux/i2c.h>
-#include <linux/gpio/consumer.h>
-
-#define CAP1106_REG_MAIN_CONTROL	0x00
-#define CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT	(6)
-#define CAP1106_REG_MAIN_CONTROL_GAIN_MASK	(0xc0)
-#define CAP1106_REG_MAIN_CONTROL_DLSEEP		BIT(4)
-#define CAP1106_REG_GENERAL_STATUS	0x02
-#define CAP1106_REG_SENSOR_INPUT	0x03
-#define CAP1106_REG_NOISE_FLAG_STATUS	0x0a
-#define CAP1106_REG_SENOR_DELTA(X)	(0x10 + (X))
-#define CAP1106_REG_SENSITIVITY_CONTROL	0x1f
-#define CAP1106_REG_CONFIG		0x20
-#define CAP1106_REG_SENSOR_ENABLE	0x21
-#define CAP1106_REG_SENSOR_CONFIG	0x22
-#define CAP1106_REG_SENSOR_CONFIG2	0x23
-#define CAP1106_REG_SAMPLING_CONFIG	0x24
-#define CAP1106_REG_CALIBRATION		0x26
-#define CAP1106_REG_INT_ENABLE		0x27
-#define CAP1106_REG_REPEAT_RATE		0x28
-#define CAP1106_REG_MT_CONFIG		0x2a
-#define CAP1106_REG_MT_PATTERN_CONFIG	0x2b
-#define CAP1106_REG_MT_PATTERN		0x2d
-#define CAP1106_REG_RECALIB_CONFIG	0x2f
-#define CAP1106_REG_SENSOR_THRESH(X)	(0x30 + (X))
-#define CAP1106_REG_SENSOR_NOISE_THRESH	0x38
-#define CAP1106_REG_STANDBY_CHANNEL	0x40
-#define CAP1106_REG_STANDBY_CONFIG	0x41
-#define CAP1106_REG_STANDBY_SENSITIVITY	0x42
-#define CAP1106_REG_STANDBY_THRESH	0x43
-#define CAP1106_REG_CONFIG2		0x44
-#define CAP1106_REG_SENSOR_BASE_CNT(X)	(0x50 + (X))
-#define CAP1106_REG_SENSOR_CALIB	(0xb1 + (X))
-#define CAP1106_REG_SENSOR_CALIB_LSB1	0xb9
-#define CAP1106_REG_SENSOR_CALIB_LSB2	0xba
-#define CAP1106_REG_PRODUCT_ID		0xfd
-#define CAP1106_REG_MANUFACTURER_ID	0xfe
-#define CAP1106_REG_REVISION		0xff
-
-#define CAP1106_NUM_CHN 6
-#define CAP1106_PRODUCT_ID	0x55
-#define CAP1106_MANUFACTURER_ID	0x5d
-
-struct cap1106_priv {
-	struct regmap *regmap;
-	struct input_dev *idev;
-
-	/* config */
-	unsigned short keycodes[CAP1106_NUM_CHN];
-};
-
-static const struct reg_default cap1106_reg_defaults[] = {
-	{ CAP1106_REG_MAIN_CONTROL,		0x00 },
-	{ CAP1106_REG_GENERAL_STATUS,		0x00 },
-	{ CAP1106_REG_SENSOR_INPUT,		0x00 },
-	{ CAP1106_REG_NOISE_FLAG_STATUS,	0x00 },
-	{ CAP1106_REG_SENSITIVITY_CONTROL,	0x2f },
-	{ CAP1106_REG_CONFIG,			0x20 },
-	{ CAP1106_REG_SENSOR_ENABLE,		0x3f },
-	{ CAP1106_REG_SENSOR_CONFIG,		0xa4 },
-	{ CAP1106_REG_SENSOR_CONFIG2,		0x07 },
-	{ CAP1106_REG_SAMPLING_CONFIG,		0x39 },
-	{ CAP1106_REG_CALIBRATION,		0x00 },
-	{ CAP1106_REG_INT_ENABLE,		0x3f },
-	{ CAP1106_REG_REPEAT_RATE,		0x3f },
-	{ CAP1106_REG_MT_CONFIG,		0x80 },
-	{ CAP1106_REG_MT_PATTERN_CONFIG,	0x00 },
-	{ CAP1106_REG_MT_PATTERN,		0x3f },
-	{ CAP1106_REG_RECALIB_CONFIG,		0x8a },
-	{ CAP1106_REG_SENSOR_THRESH(0),		0x40 },
-	{ CAP1106_REG_SENSOR_THRESH(1),		0x40 },
-	{ CAP1106_REG_SENSOR_THRESH(2),		0x40 },
-	{ CAP1106_REG_SENSOR_THRESH(3),		0x40 },
-	{ CAP1106_REG_SENSOR_THRESH(4),		0x40 },
-	{ CAP1106_REG_SENSOR_THRESH(5),		0x40 },
-	{ CAP1106_REG_SENSOR_NOISE_THRESH,	0x01 },
-	{ CAP1106_REG_STANDBY_CHANNEL,		0x00 },
-	{ CAP1106_REG_STANDBY_CONFIG,		0x39 },
-	{ CAP1106_REG_STANDBY_SENSITIVITY,	0x02 },
-	{ CAP1106_REG_STANDBY_THRESH,		0x40 },
-	{ CAP1106_REG_CONFIG2,			0x40 },
-	{ CAP1106_REG_SENSOR_CALIB_LSB1,	0x00 },
-	{ CAP1106_REG_SENSOR_CALIB_LSB2,	0x00 },
-};
-
-static bool cap1106_volatile_reg(struct device *dev, unsigned int reg)
-{
-	switch (reg) {
-	case CAP1106_REG_MAIN_CONTROL:
-	case CAP1106_REG_SENSOR_INPUT:
-	case CAP1106_REG_SENOR_DELTA(0):
-	case CAP1106_REG_SENOR_DELTA(1):
-	case CAP1106_REG_SENOR_DELTA(2):
-	case CAP1106_REG_SENOR_DELTA(3):
-	case CAP1106_REG_SENOR_DELTA(4):
-	case CAP1106_REG_SENOR_DELTA(5):
-	case CAP1106_REG_PRODUCT_ID:
-	case CAP1106_REG_MANUFACTURER_ID:
-	case CAP1106_REG_REVISION:
-		return true;
-	}
-
-	return false;
-}
-
-static const struct regmap_config cap1106_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-
-	.max_register = CAP1106_REG_REVISION,
-	.reg_defaults = cap1106_reg_defaults,
-
-	.num_reg_defaults = ARRAY_SIZE(cap1106_reg_defaults),
-	.cache_type = REGCACHE_RBTREE,
-	.volatile_reg = cap1106_volatile_reg,
-};
-
-static irqreturn_t cap1106_thread_func(int irq_num, void *data)
-{
-	struct cap1106_priv *priv = data;
-	unsigned int status;
-	int ret, i;
-
-	/*
-	 * Deassert interrupt. This needs to be done before reading the status
-	 * registers, which will not carry valid values otherwise.
-	 */
-	ret = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, 1, 0);
-	if (ret < 0)
-		goto out;
-
-	ret = regmap_read(priv->regmap, CAP1106_REG_SENSOR_INPUT, &status);
-	if (ret < 0)
-		goto out;
-
-	for (i = 0; i < CAP1106_NUM_CHN; i++)
-		input_report_key(priv->idev, priv->keycodes[i],
-				 status & (1 << i));
-
-	input_sync(priv->idev);
-
-out:
-	return IRQ_HANDLED;
-}
-
-static int cap1106_set_sleep(struct cap1106_priv *priv, bool sleep)
-{
-	return regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL,
-				  CAP1106_REG_MAIN_CONTROL_DLSEEP,
-				  sleep ? CAP1106_REG_MAIN_CONTROL_DLSEEP : 0);
-}
-
-static int cap1106_input_open(struct input_dev *idev)
-{
-	struct cap1106_priv *priv = input_get_drvdata(idev);
-
-	return cap1106_set_sleep(priv, false);
-}
-
-static void cap1106_input_close(struct input_dev *idev)
-{
-	struct cap1106_priv *priv = input_get_drvdata(idev);
-
-	cap1106_set_sleep(priv, true);
-}
-
-static int cap1106_i2c_probe(struct i2c_client *i2c_client,
-			     const struct i2c_device_id *id)
-{
-	struct device *dev = &i2c_client->dev;
-	struct cap1106_priv *priv;
-	struct device_node *node;
-	int i, error, irq, gain = 0;
-	unsigned int val, rev;
-	u32 gain32, keycodes[CAP1106_NUM_CHN];
-
-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	priv->regmap = devm_regmap_init_i2c(i2c_client, &cap1106_regmap_config);
-	if (IS_ERR(priv->regmap))
-		return PTR_ERR(priv->regmap);
-
-	error = regmap_read(priv->regmap, CAP1106_REG_PRODUCT_ID, &val);
-	if (error)
-		return error;
-
-	if (val != CAP1106_PRODUCT_ID) {
-		dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n",
-			val, CAP1106_PRODUCT_ID);
-		return -ENODEV;
-	}
-
-	error = regmap_read(priv->regmap, CAP1106_REG_MANUFACTURER_ID, &val);
-	if (error)
-		return error;
-
-	if (val != CAP1106_MANUFACTURER_ID) {
-		dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n",
-			val, CAP1106_MANUFACTURER_ID);
-		return -ENODEV;
-	}
-
-	error = regmap_read(priv->regmap, CAP1106_REG_REVISION, &rev);
-	if (error < 0)
-		return error;
-
-	dev_info(dev, "CAP1106 detected, revision 0x%02x\n", rev);
-	i2c_set_clientdata(i2c_client, priv);
-	node = dev->of_node;
-
-	if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) {
-		if (is_power_of_2(gain32) && gain32 <= 8)
-			gain = ilog2(gain32);
-		else
-			dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
-	}
-
-	BUILD_BUG_ON(ARRAY_SIZE(keycodes) != ARRAY_SIZE(priv->keycodes));
-
-	/* Provide some useful defaults */
-	for (i = 0; i < ARRAY_SIZE(keycodes); i++)
-		keycodes[i] = KEY_A + i;
-
-	of_property_read_u32_array(node, "linux,keycodes",
-				   keycodes, ARRAY_SIZE(keycodes));
-
-	for (i = 0; i < ARRAY_SIZE(keycodes); i++)
-		priv->keycodes[i] = keycodes[i];
-
-	error = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL,
-				   CAP1106_REG_MAIN_CONTROL_GAIN_MASK,
-				   gain << CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT);
-	if (error)
-		return error;
-
-	/* Disable autorepeat. The Linux input system has its own handling. */
-	error = regmap_write(priv->regmap, CAP1106_REG_REPEAT_RATE, 0);
-	if (error)
-		return error;
-
-	priv->idev = devm_input_allocate_device(dev);
-	if (!priv->idev)
-		return -ENOMEM;
-
-	priv->idev->name = "CAP1106 capacitive touch sensor";
-	priv->idev->id.bustype = BUS_I2C;
-	priv->idev->evbit[0] = BIT_MASK(EV_KEY);
-
-	if (of_property_read_bool(node, "autorepeat"))
-		__set_bit(EV_REP, priv->idev->evbit);
-
-	for (i = 0; i < CAP1106_NUM_CHN; i++)
-		__set_bit(priv->keycodes[i], priv->idev->keybit);
-
-	__clear_bit(KEY_RESERVED, priv->idev->keybit);
-
-	priv->idev->keycode = priv->keycodes;
-	priv->idev->keycodesize = sizeof(priv->keycodes[0]);
-	priv->idev->keycodemax = ARRAY_SIZE(priv->keycodes);
-
-	priv->idev->id.vendor = CAP1106_MANUFACTURER_ID;
-	priv->idev->id.product = CAP1106_PRODUCT_ID;
-	priv->idev->id.version = rev;
-
-	priv->idev->open = cap1106_input_open;
-	priv->idev->close = cap1106_input_close;
-
-	input_set_drvdata(priv->idev, priv);
-
-	/*
-	 * Put the device in deep sleep mode for now.
-	 * ->open() will bring it back once the it is actually needed.
-	 */
-	cap1106_set_sleep(priv, true);
-
-	error = input_register_device(priv->idev);
-	if (error)
-		return error;
-
-	irq = irq_of_parse_and_map(node, 0);
-	if (!irq) {
-		dev_err(dev, "Unable to parse or map IRQ\n");
-		return -ENXIO;
-	}
-
-	error = devm_request_threaded_irq(dev, irq, NULL, cap1106_thread_func,
-					  IRQF_ONESHOT, dev_name(dev), priv);
-	if (error)
-		return error;
-
-	return 0;
-}
-
-static const struct of_device_id cap1106_dt_ids[] = {
-	{ .compatible = "microchip,cap1106", },
-	{}
-};
-MODULE_DEVICE_TABLE(of, cap1106_dt_ids);
-
-static const struct i2c_device_id cap1106_i2c_ids[] = {
-	{ "cap1106", 0 },
-	{}
-};
-MODULE_DEVICE_TABLE(i2c, cap1106_i2c_ids);
-
-static struct i2c_driver cap1106_i2c_driver = {
-	.driver = {
-		.name	= "cap1106",
-		.owner	= THIS_MODULE,
-		.of_match_table = cap1106_dt_ids,
-	},
-	.id_table	= cap1106_i2c_ids,
-	.probe		= cap1106_i2c_probe,
-};
-
-module_i2c_driver(cap1106_i2c_driver);
-
-MODULE_ALIAS("platform:cap1106");
-MODULE_DESCRIPTION("Microchip CAP1106 driver");
-MODULE_AUTHOR("Daniel Mack <linux@xxxxxxxxxx>");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c
new file mode 100644
index 0000000..0da2e83
--- /dev/null
+++ b/drivers/input/keyboard/cap11xx.c
@@ -0,0 +1,340 @@
+/*
+ * Input driver for Microchip CAP11xx based capacitive touch sensors
+ *
+ *
+ * (c) 2014 Daniel Mack <linux@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <linux/i2c.h>
+#include <linux/gpio/consumer.h>
+
+#define CAP11XX_REG_MAIN_CONTROL	0x00
+#define CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT	(6)
+#define CAP11XX_REG_MAIN_CONTROL_GAIN_MASK	(0xc0)
+#define CAP11XX_REG_MAIN_CONTROL_DLSEEP		BIT(4)
+#define CAP11XX_REG_GENERAL_STATUS	0x02
+#define CAP11XX_REG_SENSOR_INPUT	0x03
+#define CAP11XX_REG_NOISE_FLAG_STATUS	0x0a
+#define CAP11XX_REG_SENOR_DELTA(X)	(0x10 + (X))
+#define CAP11XX_REG_SENSITIVITY_CONTROL	0x1f
+#define CAP11XX_REG_CONFIG		0x20
+#define CAP11XX_REG_SENSOR_ENABLE	0x21
+#define CAP11XX_REG_SENSOR_CONFIG	0x22
+#define CAP11XX_REG_SENSOR_CONFIG2	0x23
+#define CAP11XX_REG_SAMPLING_CONFIG	0x24
+#define CAP11XX_REG_CALIBRATION		0x26
+#define CAP11XX_REG_INT_ENABLE		0x27
+#define CAP11XX_REG_REPEAT_RATE		0x28
+#define CAP11XX_REG_MT_CONFIG		0x2a
+#define CAP11XX_REG_MT_PATTERN_CONFIG	0x2b
+#define CAP11XX_REG_MT_PATTERN		0x2d
+#define CAP11XX_REG_RECALIB_CONFIG	0x2f
+#define CAP11XX_REG_SENSOR_THRESH(X)	(0x30 + (X))
+#define CAP11XX_REG_SENSOR_NOISE_THRESH	0x38
+#define CAP11XX_REG_STANDBY_CHANNEL	0x40
+#define CAP11XX_REG_STANDBY_CONFIG	0x41
+#define CAP11XX_REG_STANDBY_SENSITIVITY	0x42
+#define CAP11XX_REG_STANDBY_THRESH	0x43
+#define CAP11XX_REG_CONFIG2		0x44
+#define CAP11XX_REG_SENSOR_BASE_CNT(X)	(0x50 + (X))
+#define CAP11XX_REG_SENSOR_CALIB	(0xb1 + (X))
+#define CAP11XX_REG_SENSOR_CALIB_LSB1	0xb9
+#define CAP11XX_REG_SENSOR_CALIB_LSB2	0xba
+#define CAP11XX_REG_PRODUCT_ID		0xfd
+#define CAP11XX_REG_MANUFACTURER_ID	0xfe
+#define CAP11XX_REG_REVISION		0xff
+
+#define CAP11XX_NUM_CHN 6
+#define CAP11XX_PRODUCT_ID	0x55
+#define CAP11XX_MANUFACTURER_ID	0x5d
+
+struct cap11xx_priv {
+	struct regmap *regmap;
+	struct input_dev *idev;
+
+	/* config */
+	unsigned short keycodes[CAP11XX_NUM_CHN];
+};
+
+static const struct reg_default cap11xx_reg_defaults[] = {
+	{ CAP11XX_REG_MAIN_CONTROL,		0x00 },
+	{ CAP11XX_REG_GENERAL_STATUS,		0x00 },
+	{ CAP11XX_REG_SENSOR_INPUT,		0x00 },
+	{ CAP11XX_REG_NOISE_FLAG_STATUS,	0x00 },
+	{ CAP11XX_REG_SENSITIVITY_CONTROL,	0x2f },
+	{ CAP11XX_REG_CONFIG,			0x20 },
+	{ CAP11XX_REG_SENSOR_ENABLE,		0x3f },
+	{ CAP11XX_REG_SENSOR_CONFIG,		0xa4 },
+	{ CAP11XX_REG_SENSOR_CONFIG2,		0x07 },
+	{ CAP11XX_REG_SAMPLING_CONFIG,		0x39 },
+	{ CAP11XX_REG_CALIBRATION,		0x00 },
+	{ CAP11XX_REG_INT_ENABLE,		0x3f },
+	{ CAP11XX_REG_REPEAT_RATE,		0x3f },
+	{ CAP11XX_REG_MT_CONFIG,		0x80 },
+	{ CAP11XX_REG_MT_PATTERN_CONFIG,	0x00 },
+	{ CAP11XX_REG_MT_PATTERN,		0x3f },
+	{ CAP11XX_REG_RECALIB_CONFIG,		0x8a },
+	{ CAP11XX_REG_SENSOR_THRESH(0),		0x40 },
+	{ CAP11XX_REG_SENSOR_THRESH(1),		0x40 },
+	{ CAP11XX_REG_SENSOR_THRESH(2),		0x40 },
+	{ CAP11XX_REG_SENSOR_THRESH(3),		0x40 },
+	{ CAP11XX_REG_SENSOR_THRESH(4),		0x40 },
+	{ CAP11XX_REG_SENSOR_THRESH(5),		0x40 },
+	{ CAP11XX_REG_SENSOR_NOISE_THRESH,	0x01 },
+	{ CAP11XX_REG_STANDBY_CHANNEL,		0x00 },
+	{ CAP11XX_REG_STANDBY_CONFIG,		0x39 },
+	{ CAP11XX_REG_STANDBY_SENSITIVITY,	0x02 },
+	{ CAP11XX_REG_STANDBY_THRESH,		0x40 },
+	{ CAP11XX_REG_CONFIG2,			0x40 },
+	{ CAP11XX_REG_SENSOR_CALIB_LSB1,	0x00 },
+	{ CAP11XX_REG_SENSOR_CALIB_LSB2,	0x00 },
+};
+
+static bool cap11xx_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case CAP11XX_REG_MAIN_CONTROL:
+	case CAP11XX_REG_SENSOR_INPUT:
+	case CAP11XX_REG_SENOR_DELTA(0):
+	case CAP11XX_REG_SENOR_DELTA(1):
+	case CAP11XX_REG_SENOR_DELTA(2):
+	case CAP11XX_REG_SENOR_DELTA(3):
+	case CAP11XX_REG_SENOR_DELTA(4):
+	case CAP11XX_REG_SENOR_DELTA(5):
+	case CAP11XX_REG_PRODUCT_ID:
+	case CAP11XX_REG_MANUFACTURER_ID:
+	case CAP11XX_REG_REVISION:
+		return true;
+	}
+
+	return false;
+}
+
+static const struct regmap_config cap11xx_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = CAP11XX_REG_REVISION,
+	.reg_defaults = cap11xx_reg_defaults,
+
+	.num_reg_defaults = ARRAY_SIZE(cap11xx_reg_defaults),
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = cap11xx_volatile_reg,
+};
+
+static irqreturn_t cap11xx_thread_func(int irq_num, void *data)
+{
+	struct cap11xx_priv *priv = data;
+	unsigned int status;
+	int ret, i;
+
+	/*
+	 * Deassert interrupt. This needs to be done before reading the status
+	 * registers, which will not carry valid values otherwise.
+	 */
+	ret = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, 1, 0);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_read(priv->regmap, CAP11XX_REG_SENSOR_INPUT, &status);
+	if (ret < 0)
+		goto out;
+
+	for (i = 0; i < CAP11XX_NUM_CHN; i++)
+		input_report_key(priv->idev, priv->keycodes[i],
+				 status & (1 << i));
+
+	input_sync(priv->idev);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int cap11xx_set_sleep(struct cap11xx_priv *priv, bool sleep)
+{
+	return regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL,
+				  CAP11XX_REG_MAIN_CONTROL_DLSEEP,
+				  sleep ? CAP11XX_REG_MAIN_CONTROL_DLSEEP : 0);
+}
+
+static int cap11xx_input_open(struct input_dev *idev)
+{
+	struct cap11xx_priv *priv = input_get_drvdata(idev);
+
+	return cap11xx_set_sleep(priv, false);
+}
+
+static void cap11xx_input_close(struct input_dev *idev)
+{
+	struct cap11xx_priv *priv = input_get_drvdata(idev);
+
+	cap11xx_set_sleep(priv, true);
+}
+
+static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
+			     const struct i2c_device_id *id)
+{
+	struct device *dev = &i2c_client->dev;
+	struct cap11xx_priv *priv;
+	struct device_node *node;
+	int i, error, irq, gain = 0;
+	unsigned int val, rev;
+	u32 gain32, keycodes[CAP11XX_NUM_CHN];
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = devm_regmap_init_i2c(i2c_client, &cap11xx_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	error = regmap_read(priv->regmap, CAP11XX_REG_PRODUCT_ID, &val);
+	if (error)
+		return error;
+
+	if (val != CAP11XX_PRODUCT_ID) {
+		dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n",
+			val, CAP11XX_PRODUCT_ID);
+		return -ENODEV;
+	}
+
+	error = regmap_read(priv->regmap, CAP11XX_REG_MANUFACTURER_ID, &val);
+	if (error)
+		return error;
+
+	if (val != CAP11XX_MANUFACTURER_ID) {
+		dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n",
+			val, CAP11XX_MANUFACTURER_ID);
+		return -ENODEV;
+	}
+
+	error = regmap_read(priv->regmap, CAP11XX_REG_REVISION, &rev);
+	if (error < 0)
+		return error;
+
+	dev_info(dev, "CAP11XX detected, revision 0x%02x\n", rev);
+	i2c_set_clientdata(i2c_client, priv);
+	node = dev->of_node;
+
+	if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) {
+		if (is_power_of_2(gain32) && gain32 <= 8)
+			gain = ilog2(gain32);
+		else
+			dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
+	}
+
+	BUILD_BUG_ON(ARRAY_SIZE(keycodes) != ARRAY_SIZE(priv->keycodes));
+
+	/* Provide some useful defaults */
+	for (i = 0; i < ARRAY_SIZE(keycodes); i++)
+		keycodes[i] = KEY_A + i;
+
+	of_property_read_u32_array(node, "linux,keycodes",
+				   keycodes, ARRAY_SIZE(keycodes));
+
+	for (i = 0; i < ARRAY_SIZE(keycodes); i++)
+		priv->keycodes[i] = keycodes[i];
+
+	error = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL,
+				   CAP11XX_REG_MAIN_CONTROL_GAIN_MASK,
+				   gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT);
+	if (error)
+		return error;
+
+	/* Disable autorepeat. The Linux input system has its own handling. */
+	error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0);
+	if (error)
+		return error;
+
+	priv->idev = devm_input_allocate_device(dev);
+	if (!priv->idev)
+		return -ENOMEM;
+
+	priv->idev->name = "CAP11XX capacitive touch sensor";
+	priv->idev->id.bustype = BUS_I2C;
+	priv->idev->evbit[0] = BIT_MASK(EV_KEY);
+
+	if (of_property_read_bool(node, "autorepeat"))
+		__set_bit(EV_REP, priv->idev->evbit);
+
+	for (i = 0; i < CAP11XX_NUM_CHN; i++)
+		__set_bit(priv->keycodes[i], priv->idev->keybit);
+
+	__clear_bit(KEY_RESERVED, priv->idev->keybit);
+
+	priv->idev->keycode = priv->keycodes;
+	priv->idev->keycodesize = sizeof(priv->keycodes[0]);
+	priv->idev->keycodemax = ARRAY_SIZE(priv->keycodes);
+
+	priv->idev->id.vendor = CAP11XX_MANUFACTURER_ID;
+	priv->idev->id.product = CAP11XX_PRODUCT_ID;
+	priv->idev->id.version = rev;
+
+	priv->idev->open = cap11xx_input_open;
+	priv->idev->close = cap11xx_input_close;
+
+	input_set_drvdata(priv->idev, priv);
+
+	/*
+	 * Put the device in deep sleep mode for now.
+	 * ->open() will bring it back once the it is actually needed.
+	 */
+	cap11xx_set_sleep(priv, true);
+
+	error = input_register_device(priv->idev);
+	if (error)
+		return error;
+
+	irq = irq_of_parse_and_map(node, 0);
+	if (!irq) {
+		dev_err(dev, "Unable to parse or map IRQ\n");
+		return -ENXIO;
+	}
+
+	error = devm_request_threaded_irq(dev, irq, NULL, cap11xx_thread_func,
+					  IRQF_ONESHOT, dev_name(dev), priv);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static const struct of_device_id cap11xx_dt_ids[] = {
+	{ .compatible = "microchip,cap1106", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, cap11xx_dt_ids);
+
+static const struct i2c_device_id cap11xx_i2c_ids[] = {
+	{ "cap1106", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, cap11xx_i2c_ids);
+
+static struct i2c_driver cap11xx_i2c_driver = {
+	.driver = {
+		.name	= "cap11xx",
+		.owner	= THIS_MODULE,
+		.of_match_table = cap11xx_dt_ids,
+	},
+	.id_table	= cap11xx_i2c_ids,
+	.probe		= cap11xx_i2c_probe,
+};
+
+module_i2c_driver(cap11xx_i2c_driver);
+
+MODULE_ALIAS("platform:cap11xx");
+MODULE_DESCRIPTION("Microchip CAP11XX driver");
+MODULE_AUTHOR("Daniel Mack <linux@xxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux