Re: [PATCH 0/2] Qualcomm PM8941 power key driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue 07 Oct 02:01 PDT 2014, Ivan T. Ivanov wrote:

> 
> Hi Bjorn,
> 
> On Mon, 2014-10-06 at 18:11 -0700, Bjorn Andersson wrote:
> > These patches add dt bindings and a device driver for the power key block in
> > the Qualcomm PM8941 pmic.
> > 
> > Courtney Cavin (2):
> >   input: Add Qualcomm PM8941 power key driver
> >   input: pm8941-pwrkey: Add DT binding documentation
> > 
> >  .../bindings/input/qcom,pm8941-pwrkey.txt          |   43 +++++
> >  drivers/input/misc/Kconfig                         |   12 ++
> >  drivers/input/misc/Makefile                        |    1 +
> >  drivers/input/misc/pm8941-pwrkey.c                 |  196 ++++++++++++++++++++
> >  4 files changed, 252 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> >  create mode 100644 drivers/input/misc/pm8941-pwrkey.c
> 
> Any reason why we cannot reuse pm8xxx-pwrkey driver? It have been
> converted to regmap already. 
> 

The boilerplate code is the same, but configuration registers have different
layout and values written in them are different. The pm8xxx block have separate
interrupts for press and release events while pm8941 have one interrupt for
both, so the pm8941 must read out the irq status bits to figure out which event
it was.

Maybe if we introduce some vagueness related to interrupts in the dt binding
documentation for pm8xxx we could simply reuse that binding.

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux