Add a driver for the Goodix touchscreen panel found in Onda v975w
tablets. The driver is based off the Android driver gt9xx.c found
in some Android code dumps, but now bears no resemblance to the original
driver.
The driver was tested on the aforementioned tablet.
Signed-off-by: Bastien Nocera <hadess@xxxxxxxxxx>
Tested-by: Bastien Nocera <hadess@xxxxxxxxxx>
---
MAINTAINERS | 6 +
drivers/input/touchscreen/Kconfig | 13 ++
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/goodix.c | 452 +++++++++++++++++++++++++++++++++++++
4 files changed, 472 insertions(+)
create mode 100644 drivers/input/touchscreen/goodix.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 670b3dc..7a37464 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4057,6 +4057,12 @@ L: linux-media@xxxxxxxxxxxxxxx
S: Maintained
F: drivers/media/usb/go7007/
+GOODIX TOUCHSCREEN
+M: Bastien Nocera <hadess@xxxxxxxxxx>
+L: linux-input@xxxxxxxxxxxxxxx
+S: Maintained
+F: drivers/input/touchscreen/goodix.c
+
GPIO SUBSYSTEM
M: Linus Walleij <linus.walleij@xxxxxxxxxx>
M: Alexandre Courbot <gnurou@xxxxxxxxx>
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 6bb9a7d..c328df3 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -283,6 +283,19 @@ config TOUCHSCREEN_FUJITSU
To compile this driver as a module, choose M here: the
module will be called fujitsu-ts.
+config TOUCHSCREEN_GOODIX
+ tristate "Goodix I2C touchscreen"
+ depends on I2C && ACPI
+ help
+ Say Y here if you have the Goodix touchscreen (such as one
+ installed in Onda v975w tablets) connected to your
+ system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called goodix.
+
config TOUCHSCREEN_ILI210X
tristate "Ilitek ILI210X based touchscreen"
depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 4be94fc..55af212 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o
obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o
obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o
obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
+obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o
obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
new file mode 100644
index 0000000..bda6482
--- /dev/null
+++ b/drivers/input/touchscreen/goodix.c
@@ -0,0 +1,452 @@
+/*
+ * driver for Goodix Touchscreens
+ *
+ * Copyright (c) 2014 Red Hat Inc.
+ *
+ * This code is based on gt9xx.c authored by andrew@xxxxxxxxxx:
+ *
+ * 2010 - 2012 Goodix Technology.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+
+struct goodix_ts_data {
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ int abs_x_max;
+ int abs_y_max;
+ unsigned int max_touch_num;
+ unsigned int int_trigger_type;
+};
+
+#define GOODIX_MAX_HEIGHT 4096
+#define GOODIX_MAX_WIDTH 4096
+#define GOODIX_INT_TRIGGER 1
+#define GOODIX_MAX_TOUCH 10
+
+#define GOODIX_CONFIG_MAX_LENGTH 240
+
+/* Register defineS */
+#define GOODIX_READ_COOR_ADDR 0x814E
+#define GOODIX_REG_CONFIG_DATA 0x8047
+#define GOODIX_REG_VERSION 0x8140
+
+#define RESOLUTION_LOC 1
+#define TRIGGER_LOC 6
+
+#define GOODIX_INFO(fmt, arg...) pr_info("<<-GTP-INFO->> "fmt"\n", ##arg)
+#define GOODIX_ERROR(fmt, arg...) pr_err("<<-GTP-ERROR->> "fmt"\n", ##arg)
+
+static const char *goodix_ts_name = "Goodix Capacitive TouchScreen";
+static const unsigned long goodix_irq_flags[] = {
+ IRQ_TYPE_EDGE_RISING | IRQF_ONESHOT,
+ IRQ_TYPE_EDGE_FALLING | IRQF_ONESHOT,
+ IRQ_TYPE_LEVEL_LOW | IRQF_ONESHOT,
+ IRQ_TYPE_LEVEL_HIGH | IRQF_ONESHOT
+};
+
+/**
+ * goodix_i2c_read - read data from a register of the i2c slave device.
+ *
+ * @client: i2c device.
+ * @reg: the register to read from.
+ * @buf: raw write data buffer.
+ * @len: length of the buffer to write
+ */
+static int goodix_i2c_read(struct i2c_client *client,
+ u16 reg, u8 *buf, int len)
+{
+ struct i2c_msg msgs[2];
+ u8 wbuf[2] = { reg >> 8, reg & 0xff };
+
+ msgs[0].flags = !I2C_M_RD;
+ msgs[0].addr = client->addr;
+ msgs[0].len = 2;
+ msgs[0].buf = wbuf;
+
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].addr = client->addr;
+ msgs[1].len = len;
+ msgs[1].buf = buf;
+
+ return i2c_transfer(client->adapter, msgs, 2);
+}
+
+/**
+ * goodix_i2c_write - write data to the i2c slave device.
+ *
+ * @client: i2c device.
+ * @reg: the register to read to.
+ * @buf: raw write data buffer.
+ * @len: length of the buffer to write
+ */
+static int goodix_i2c_write(struct i2c_client *client,
+ u16 reg, u8 *buf, int len)
+{
+ struct i2c_msg msg;
+ int ret;
+ u8 *wbuf;
+
+ wbuf = kzalloc(len + 2, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ wbuf[0] = reg >> 8;
+ wbuf[1] = reg & 0xFF;
+ memcpy(&wbuf[2], buf, len);
+
+ msg.flags = !I2C_M_RD;
+ msg.addr = client->addr;
+ msg.len = len + 2;
+ msg.buf = wbuf;
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ kfree(wbuf);
+ return ret;
+}
+
+static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
+{
+ int touch_num;
+ int ret;
+
+ ret = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR, data, 10);
+ if (ret < 0) {
+ GOODIX_ERROR("I2C transfer error (%d)\n", ret);
+ return ret;
+ }
+
+ touch_num = data[0] & 0x0f;
+ if (touch_num > GOODIX_MAX_TOUCH)
+ return -EPROTO;
+
+ if (touch_num > 1) {
+ ret = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR + 10,
+ &data[10], 8 * (touch_num - 1));
+ if (ret < 0)
+ return ret;
+ }
+
+ return touch_num;
+}
+
+static void goodix_ts_parse_touch(struct goodix_ts_data *ts, u8 *coor_data)
+{
+ int id = coor_data[0] & 0x0F;
+ int input_x = get_unaligned_le16(&coor_data[1]);
+ int input_y = get_unaligned_le16(&coor_data[3]);
+ int input_w = get_unaligned_le16(&coor_data[5]);
+
+ input_mt_slot(ts->input_dev, id);
+ input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true);
+ input_report_abs(ts->input_dev, ABS_MT_POSITION_X, input_x);
+ input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, input_y);
+ input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, input_w);
+ input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w);
+}
+
+/**
+ * goodix_ts_work_func - Process incoming IRQ
+ *
+ * @ts: our goodix_ts_data pointer
+ *
+ * Called when the IRQ is triggered. Read the current device state, and push
+ * the input events to the user space.
+ */
+static void goodix_ts_work_func(struct goodix_ts_data *ts)
+{
+ u8 end_cmd[1] = {0};
+ u8 point_data[1 + 8 * GOODIX_MAX_TOUCH + 1];
+ int touch_num;
+ int i;
+
+ touch_num = goodix_ts_read_input_report(ts, point_data);
+ if (touch_num < 0)
+ goto exit_work_func;
+
+ for (i = 0; i < touch_num; i++)
+ goodix_ts_parse_touch(ts, &point_data[1 + 8 * i]);
+
+ input_mt_sync_frame(ts->input_dev);
+ input_sync(ts->input_dev);
+
+exit_work_func:
+ if (goodix_i2c_write(ts->client,
+ GOODIX_READ_COOR_ADDR, end_cmd, 1) < 0)
+ GOODIX_INFO("I2C write end_cmd error");
+}
+
+/**
+ * goodix_ts_irq_handler - The IRQ handler
+ *
+ * @irq: interrupt number.
+ * @dev_id: private data pointer.
+ */
+static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id)
+{
+ struct goodix_ts_data *ts = dev_id;
+
+ goodix_ts_work_func(ts);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * goodix_read_config - Read the embedded configuration of the panel
+ *
+ * @ts: our goodix_ts_data pointer
+ *
+ * Must be called during probe
+ */
+static void goodix_read_config(struct goodix_ts_data *ts)
+{
+ int ret;
+ u8 config[GOODIX_CONFIG_MAX_LENGTH];
+
+ ret = goodix_i2c_read(ts->client, GOODIX_REG_CONFIG_DATA, config,
+ GOODIX_CONFIG_MAX_LENGTH);
+ if (ret < 0) {
+ GOODIX_ERROR("Error reading config, use default value!");
+ ts->abs_x_max = GOODIX_MAX_WIDTH;
+ ts->abs_y_max = GOODIX_MAX_HEIGHT;
+ ts->int_trigger_type = GOODIX_INT_TRIGGER;
+ return;
+ }
+
+ ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
+ ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
+ ts->int_trigger_type = (config[TRIGGER_LOC]) & 0x03;
+ if ((!ts->abs_x_max) || (!ts->abs_y_max)) {
+ GOODIX_ERROR("Invalid config, use default value!");
+ ts->abs_x_max = GOODIX_MAX_WIDTH;
+ ts->abs_y_max = GOODIX_MAX_HEIGHT;
+ }
+}
+
+
+/**
+ * goodix_read_version - Read goodix touchscreen version
+ *
+ * @client: the i2c client
+ * @version: output buffer containing the version on success
+ */
+static int goodix_read_version(struct i2c_client *client, u16 *version)
+{
+ int ret;
+ int i;
+ u8 buf[6];
+
+ ret = goodix_i2c_read(client, GOODIX_REG_VERSION, buf, sizeof(buf));
+ if (ret < 0) {
+ GOODIX_ERROR("GTP read version failed");
+ return ret;
+ }
+
+ if (version)
+ *version = get_unaligned_le16(&buf[4]);
+
+ for (i = 0; i < 4; i++) {
+ if (!buf[i])
+ buf[i] = 0x30;
+ }
+ GOODIX_INFO("IC VERSION: %c%c%c%c_%02x%02x",
+ buf[0], buf[1], buf[2], buf[3], buf[5], buf[4]);
+
+ return ret;
+}
+
+/**
+ * goodix_i2c_test - I2C test function to check if the device answers.
+ *
+ * @client: the i2c client
+ */
+static int goodix_i2c_test(struct i2c_client *client)
+{
+ u8 test;
+ int ret;
+ int retry = 0;
+
+ while (retry++ < 2) {
+ ret = goodix_i2c_read(client, GOODIX_REG_CONFIG_DATA,
+ &test, 1);
+ if (ret > 0)
+ return ret;
+
+ GOODIX_ERROR("GTP i2c test failed time %d.", retry);
+ msleep(20);
+ }
+ return ret;
+}
+
+/**
+ * goodix_request_irq - Request the IRQ handler
+ *
+ * @ts: our goodix_ts_data pointer
+ *
+ * Must be called during probe
+ */
+static int goodix_request_irq(struct goodix_ts_data *ts)
+{
+ int ret;
+
+ ret = devm_request_threaded_irq(&ts->client->dev,
+ ts->client->irq, NULL,
+ goodix_ts_irq_handler,
+ goodix_irq_flags[ts->int_trigger_type],
+ ts->client->name,
+ ts);
+ if (ret) {
+ GOODIX_ERROR("Request IRQ failed! ERRNO:%d.", ret);
+ return -1;
+ }
+
+ disable_irq_nosync(ts->client->irq);
+ return 0;
+}
+
+/**
+ * goodix_request_input_dev - Allocate, populate and register the input device
+ *
+ * @ts: our goodix_ts_data pointer
+ *
+ * Must be called during probe
+ */
+static int goodix_request_input_dev(struct goodix_ts_data *ts)
+{
+ int ret;
+
+ ts->input_dev = devm_input_allocate_device(&ts->client->dev);
+ if (ts->input_dev == NULL) {
+ GOODIX_ERROR("Failed to allocate input device.");
+ return -ENOMEM;
+ }
+
+ ts->input_dev->evbit[0] = BIT_MASK(EV_SYN) |
+ BIT_MASK(EV_KEY) |
+ BIT_MASK(EV_ABS);
+
+ input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X, 0,
+ ts->abs_x_max, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y, 0,
+ ts->abs_y_max, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+
+ input_mt_init_slots(ts->input_dev, GOODIX_MAX_TOUCH,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+
+ ts->input_dev->name = goodix_ts_name;
+ ts->input_dev->phys = "input/ts";
+ ts->input_dev->id.bustype = BUS_I2C;
+ ts->input_dev->id.vendor = 0x0416;
+ ts->input_dev->id.product = 0x1001;
+ ts->input_dev->id.version = 10427;
+
+ ret = input_register_device(ts->input_dev);
+ if (ret) {
+ GOODIX_ERROR("Failed to register %s input device",
+ ts->input_dev->name);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int goodix_ts_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct goodix_ts_data *ts;
+ u16 version_info;
+
+ GOODIX_INFO("GTP I2C Address: 0x%02x", client->addr);
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ GOODIX_ERROR("I2C check functionality failed.");
+ return -ENODEV;
+ }
+ ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL);
+ if (ts == NULL) {
+ GOODIX_ERROR("Alloc GFP_KERNEL memory failed.");
+ return -ENOMEM;
+ }
+
+ ts->client = client;
+ i2c_set_clientdata(client, ts);
+
+ ret = goodix_i2c_test(client);
+ if (ret < 0) {
+ client->addr = 0x5d;
+ ret = goodix_i2c_test(client);
+ if (ret < 0) {
+ GOODIX_ERROR("I2C communication ERROR!");
+ return -ENODEV;
+ }
+ GOODIX_INFO("GTP I2C new Address: 0x%02x", client->addr);
+ }
+
+ goodix_read_config(ts);
+
+ ret = goodix_request_input_dev(ts);
+ if (ret < 0) {
+ GOODIX_ERROR("GTP request input dev failed");
+ return ret;
+ }
+
+ ret = goodix_request_irq(ts);
+ if (ret < 0)
+ return ret;
+
+ ret = goodix_read_version(client, &version_info);
+ if (ret < 0) {
+ GOODIX_ERROR("Read version failed.");
+ return ret;
+ }
+
+ enable_irq(ts->client->irq);
+
+ return 0;
+}
+
+static const struct i2c_device_id goodix_ts_id[] = {
+ { "GDIX1001:00", 0 },
+ { }
+};
+
+static const struct acpi_device_id goodix_acpi_match[] = {
+ { "GDIX1001", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, goodix_acpi_match);
+
+static struct i2c_driver goodix_ts_driver = {
+ .probe = goodix_ts_probe,
+ .id_table = goodix_ts_id,
+ .driver = {
+ .name = "Goodix-TS",
+ .owner = THIS_MODULE,
+ .acpi_match_table = goodix_acpi_match,
+ },
+};
+
+module_i2c_driver(goodix_ts_driver);
+
+MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>");
+MODULE_AUTHOR("Bastien Nocera <hadess@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Goodix touchscreen driver");
+MODULE_LICENSE("GPL v2");
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
