Use the correct register address for Calibration Active and Interrupt Enable Signed-off-by: Klaus Goger <klaus.goger@xxxxxxxxxxxxxxxxxxxxx> --- drivers/input/keyboard/cap1106.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/input/keyboard/cap1106.c b/drivers/input/keyboard/cap1106.c index 180b184..d70b65a 100644 --- a/drivers/input/keyboard/cap1106.c +++ b/drivers/input/keyboard/cap1106.c @@ -33,8 +33,8 @@ #define CAP1106_REG_SENSOR_CONFIG 0x22 #define CAP1106_REG_SENSOR_CONFIG2 0x23 #define CAP1106_REG_SAMPLING_CONFIG 0x24 -#define CAP1106_REG_CALIBRATION 0x25 -#define CAP1106_REG_INT_ENABLE 0x26 +#define CAP1106_REG_CALIBRATION 0x26 +#define CAP1106_REG_INT_ENABLE 0x27 #define CAP1106_REG_REPEAT_RATE 0x28 #define CAP1106_REG_MT_CONFIG 0x2a #define CAP1106_REG_MT_PATTERN_CONFIG 0x2b -- 1.9.0 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
