Hi Linus,
Please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git for-linus
or
master.kernel.org:/pub/scm/linux/kernel/git/dtor/input.git for-linus
to receive updates for the input subsystem. You will get a bit update to
Wacom driver by Benjamin Tissoires, converting it to HID infrastructure
and unifying USB and Bluetooth models. You will also get a large update
to ALPS driver by Hans de Goede, which adds support for newer touchpad
models as well as cleans up and restructures the code, more changes to
Atmel MXT driver, including device tree support, a new driver for iPaq
x3xxx touchscreen, a driver for serial Wacom tablets, a driver for
Microchip's CAP1106, and assorted cleanups and improvements to existing
drover and input core.
Thanks!
Changelog:
---------
Benjamin Tissoires (35):
Input: Revert "wacom - testing result shows get_report is unnecessary."
Input: wacom - assign phys field from struct wacom into input_dev
Input: wacom - create a separate input device for pads
Input: wacom - split out the pad device for Intuos/Cintiq
Input: wacom - split out the pad device for Bamboos
Input: wacom - split out the pad device for DTUS
Input: wacom - split out the pad device for Graphire G4 and MO
Input: wacom - split out the pad device for the wireless receiver
Input: wacom - include and use linux/hid.h
Input: wacom - switch from an USB driver to a HID driver
Input: wacom - use hid communication instead of plain usb
Input: wacom - use HID core to actually fetch the report descriptor
Input: wacom - compute the HID report size to get the actual packet size
Input: wacom - install LED/OLED sysfs files in the HID device instead of USB
Input: wacom - register the input devices on top of the HID one
Input: wacom - remove usb dependency for siblings devices
Input: wacom - register power device at the HID level
Input: wacom - use hid_info instead of plain dev_info
Input: wacom - use in-kernel HID parser
Input: wacom - use hidinput_calc_abs_res instead of duplicating its code
Input: wacom - remove field pktlen declaration in the list of devices
Input: wacom - keep wacom_ids ordered
Input: wacom - move the USB (now hid) Wacom driver in drivers/hid
Input: wacom - put a flag when the led are initialized
Input: wacom - enhance Wireless Receiver battery reporting
Input: wacom - use a uniq name for the battery device
Input: wacom - register an ac power supply for wireless devices
Input: wacom - prepare the driver to include BT devices
Input: wacom - handle Graphire BT tablets in wacom.ko
Input: wacom - handle Intuos 4 BT in wacom.ko
Input: wacom - check for bluetooth protocol while setting OLEDs
Input: wacom - add copyright note and bump version to 2.0
Input: HID - remove hid-wacom Bluetooth driver
Input: wacom - only register once the MODULE_* macros
Input: wacom - update the ABI doc according to latest changes
Benson Leung (1):
Input: atmel_mxt_ts - set pointer emulation on touchpads
Daniel Mack (1):
Input: add driver for Microchip's CAP1106
David Herrmann (2):
Input: uinput - uinput_validate_absbits() cleanup
Input: uinput - add UI_GET_VERSION ioctl
Dexuan Cui (1):
Input: hyperv-keyboard - register as a wakeup source
Dmitry Artamonow (1):
Input: driver for touchscreen on iPaq h3xxx
Dmitry Torokhov (2):
Input: ipaq-micro-ts - introduce open/close
Input: wacom_serial4 - prepare for wacom USB moving to HID
Fabian Frederick (2):
Input: keyspan_remote - remove unnecessary break after goto
Input: edt-ft5x06 - remove unnecessary null test
Fabio Estevam (3):
Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP
Input: mcs5000_ts - remove ifdef around power management methods
Input: imx_keypad - remove ifdef round PM methods
Hans de Goede (14):
Input: add support for Wacom protocol 4 serial tablets
Input: alps - improve 2-finger reporting on v3 models
Input: alps - process_bitmap: don't invert the Y-axis on Rushmore
Input: alps - process_bitmap: add alps_get_bitmap_points() helper function
Input: alps - process_bitmap: fix counting of high point bits
Input: alps - process_bitmap: round down when spreading adjescent fingers over 2 points
Input: alps - use struct input_mt_pos to track coordinates
Input: alps - use standard contact tracking instead of DIY
Input: alps - use single touch data when v3 mt data contains only one finger
Input: alps - add an alps_report_semi_mt_data function
Input: alps - report 2 touches when we've > 2 fingers
Input: alps - change decode function prototype to return an int
Input: alps - cache firmware version
Input: alps - Rushmore and v7 resolution support
Heiko Stuebner (1):
Input: zforce - add regulator handling
Himangi Saraogi (1):
Input: max7359 - introduce the use of managed interfaces
Jason Gerecke (2):
Input: wacom - support up to 2048 pressure levels with ISDv4
Input: wacom - add support for 0x12C ISDv4 sensor
Nick Dyer (13):
Input: atmel_mxt_ts - initialise IRQ before probing
Input: atmel_mxt_ts - move input device init into separate function
Input: atmel_mxt_ts - download device config using firmware loader
Input: atmel_mxt_ts - calculate and check CRC in config file
Input: atmel_mxt_ts - handle APP_CRC_FAIL on startup
Input: atmel_mxt_ts - handle bootloader previously unlocked
Input: atmel_mxt_ts - add bootloader addresses for new chips
Input: atmel_mxt_ts - recover from bootloader on probe
Input: atmel_mxt_ts - add support for dynamic message size
Input: atmel_mxt_ts - decode T6 status messages
Input: atmel_mxt_ts - split message handler into separate functions
Input: atmel_mxt_ts - implement T44 message handling
Input: atmel_mxt_ts - use deep sleep mode when stopped
Pramod Gurav (4):
Input: soc_button_array - add missing memory allocation check
Input: ads7846 - release resources on failure for clean exit
Input: jornada720_ts - switch to using managed resources
Input: jornada720_ts - get rid of space indentation and use tab
Przemo Firszt (1):
Input: wacom - remove passing id for wacom_set_report
Roger Quadros (5):
Input: pixcir_i2c_ts - use Type-B Multi-Touch protocol
Input: pixcir_i2c_ts - support up to 5 fingers and hardware tracking IDs
Input: pixcir_i2c_ts - add device tree support
ARM: dts: am43x-epos-evm: Update binding for touchscreen size
ARM: dts: am437x-gp-evm: Update binding for touchscreen size
Stephen Warren (1):
Input: atmel_mxt_ts - implement device tree support
Vasily Khoruzhick (1):
Input: s3c2410_ts - fix preparing/enabling clock
Yunkang Tang (2):
Input: alps - fix rushmore packet decoding
Input: alps - add support for v7 devices
Diffstat:
--------
Documentation/ABI/testing/sysfs-driver-wacom | 70 +-
.../devicetree/bindings/input/atmel,maxtouch.txt | 25 +
.../devicetree/bindings/input/cap1106.txt | 53 +
.../bindings/input/touchscreen/pixcir_i2c_ts.txt | 26 +
.../bindings/input/touchscreen/zforce_ts.txt | 4 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
MAINTAINERS | 7 +
arch/arm/boot/dts/am437x-gp-evm.dts | 4 +-
arch/arm/boot/dts/am43x-epos-evm.dts | 4 +-
drivers/hid/Kconfig | 13 +-
drivers/hid/Makefile | 4 +-
drivers/hid/hid-core.c | 12 +-
drivers/hid/hid-wacom.c | 973 ---------------
drivers/{input/tablet => hid}/wacom.h | 27 +-
drivers/{input/tablet => hid}/wacom_sys.c | 1229 +++++++++---------
drivers/{input/tablet => hid}/wacom_wac.c | 1176 ++++++++++-------
drivers/{input/tablet => hid}/wacom_wac.h | 22 +-
drivers/input/keyboard/Kconfig | 10 +
drivers/input/keyboard/Makefile | 1 +
drivers/input/keyboard/cap1106.c | 335 +++++
drivers/input/keyboard/imx_keypad.c | 6 +-
drivers/input/keyboard/max7359_keypad.c | 45 +-
drivers/input/misc/keyspan_remote.c | 1 -
drivers/input/misc/soc_button_array.c | 3 +
drivers/input/misc/uinput.c | 47 +-
drivers/input/mouse/alps.c | 691 ++++++----
drivers/input/mouse/alps.h | 60 +-
drivers/input/serio/hyperv-keyboard.c | 13 +
drivers/input/tablet/Kconfig | 18 +-
drivers/input/tablet/Makefile | 4 +-
drivers/input/tablet/wacom_serial4.c | 620 +++++++++
drivers/input/touchscreen/Kconfig | 12 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/ads7846.c | 6 +-
drivers/input/touchscreen/atmel_mxt_ts.c | 1315 +++++++++++++++-----
drivers/input/touchscreen/edt-ft5x06.c | 3 +-
drivers/input/touchscreen/ipaq-micro-ts.c | 166 +++
drivers/input/touchscreen/jornada720_ts.c | 70 +-
drivers/input/touchscreen/mcs5000_ts.c | 6 +-
drivers/input/touchscreen/pixcir_i2c_ts.c | 250 +++-
drivers/input/touchscreen/s3c2410_ts.c | 4 +-
drivers/input/touchscreen/zforce_ts.c | 31 +
drivers/platform/chrome/chromeos_laptop.c | 4 -
include/linux/hid.h | 5 +
include/linux/i2c/atmel_mxt_ts.h | 3 -
include/linux/input/pixcir_ts.h | 12 +
include/uapi/linux/serio.h | 1 +
include/uapi/linux/uinput.h | 9 +
48 files changed, 4516 insertions(+), 2886 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/atmel,maxtouch.txt
create mode 100644 Documentation/devicetree/bindings/input/cap1106.txt
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
delete mode 100644 drivers/hid/hid-wacom.c
rename drivers/{input/tablet => hid}/wacom.h (89%)
rename drivers/{input/tablet => hid}/wacom_sys.c (51%)
rename drivers/{input/tablet => hid}/wacom_wac.c (74%)
rename drivers/{input/tablet => hid}/wacom_wac.h (88%)
create mode 100644 drivers/input/keyboard/cap1106.c
create mode 100644 drivers/input/tablet/wacom_serial4.c
create mode 100644 drivers/input/touchscreen/ipaq-micro-ts.c
--
Dmitry
Attachment:
signature.asc
Description: Digital signature
