On 07/28/2014 06:10 PM, Yufeng Shen wrote:
On Mon, Jul 28, 2014 at 7:42 PM, Stephen Warren <swarren@xxxxxxxxxxxxx> wrote:
On 07/28/2014 03:23 PM, Stephen Warren wrote:
On 07/28/2014 02:20 PM, Yufeng Shen wrote:
...
Where did you get the configuration file ? It is possible that we rely
too much on mxt_start to turn on the T9.CTRL bit and have neglected
its setting in the config file.
If you can tell me where you get the config file I can do a check.
It was already flashed into the touchpad when I received the board. I
did try to track down the firmware/config files a few months ago, but
didn't manage to; I was told since they were already flashed so I didn't
need them. The board is Venice2.
OK, I received the configuration and firmware file that's supposed to be in
the touchpad.
I can see that the config file I was given has the "83" byte in the T9
configuration, and in fact /almost/ exactly matches the configuration I
have. I don't know why my T9 configuration was wrong before, but I suspect
it's not worth trying to track that down.
Anyway, here's the diff between the two config files:
# diff -u mxt-save-after-t9-83-write.xml 224sl.raw
--- mxt-save-after-t9-83-write.xml 2014-07-25 19:41:45.000000000
+0000
+++ 224sl.raw 2014-07-28 23:25:49.000000000 +0000
@@ -1,8 +1,7 @@
OBP_RAW V1
82 01 10 AA 12 0C 16
F5AF33
-000000
-0025 0000 0082 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00
+E21E65
0026 0000 0008 00 00 00 00 00 00 00 00
0007 0000 0004 20 10 32 00
0008 0000 000A 1E 00 28 28 00 00 00 00 00 00
It seems that the T25(?) entry is missing in the new/expected configuration
file. I figured I'd try out the new/expected configuration file, so did:
T37 (0x25) is DEBUG_DIAGNOSTIC object which the host can read debugging info
from. It is not useful to have a initial config for it so usually CrOS
system would just don't include configuration for this object.
OK, that makes sense.
I also tested mxt-app --zero to clear the config, the dumped it with
--save to verify it was cleared, then --load 224sl.raw and then --save
to verify it was programmed back correctly. That seemed to all work fine.
I then tried updating the firmware. This didn't work at all.
First I tried via mxt-app:
root@localhost:~# ./obp-utils/mxt-app -d i2c-dev:1-004b --flash 130.1_1.0.170.bin
Version:1.16-65-g0a4c
Opening firmware file 130.1_1.0.170.bin
Registered i2c-dev adapter:1 address:0x4b
Chip detected
Current firmware version: 1.0.AA
Skipping version check
Resetting in bootloader mode
Registered i2c-dev adapter:1 address:0x25
Error Remote I/O error (121) reading from i2c
Bootloader read failure
Bootloader not found
Then I power-cycled and tried via the atmel_mxt_ts modules' sysfs files:
root@localhost:~# echo 1 > /sys/devices/soc0/7000c400.i2c/i2c-1/1-004b/update_fw
[ 38.495420] atmel_mxt_ts 1-004b: mxt_bootloader_read: i2c recv failed (-121)
[ 38.506208] atmel_mxt_ts 1-004b: mxt_bootloader_read: i2c recv failed (-121)
[ 38.513836] atmel_mxt_ts 1-004b: The firmware update failed(-121)
-bash: echo: write error: Remote I/O error
I also found that removing the module (even without attempting a FW
update) yields:
After attempted FW update via sysfs:
root@localhost:~# rmmod ./atmel_mxt_ts.ko
[ 81.995672] Unable to handle kernel NULL pointer dereference at virtual address 00000364
[ 82.003828] pgd = e8cd0000
[ 82.006548] [00000364] *pgd=00000000
[ 82.010221] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[ 82.015537] Modules linked in: atmel_mxt_ts(-)
[ 82.020007] CPU: 0 PID: 836 Comm: rmmod Not tainted 3.16.0-rc7-next-20140729-00011-gead0778e710c-dirty #7
[ 82.029559] task: e98ba140 ti: e8cc8000 task.ti: e8cc8000
[ 82.034961] PC is at input_unregister_device+0x8/0x70
[ 82.040010] LR is at mxt_remove+0x28/0x44 [atmel_mxt_ts]
[ 82.045315] pc : [<c039de7c>] lr : [<bf000410>] psr: 60000113
[ 82.045315] sp : e8cc9f08 ip : e97c7900 fp : 00000800
[ 82.056774] r10: 00000000 r9 : e8cc8000 r8 : c000e924
[ 82.061990] r7 : 00000081 r6 : ea1a7a54 r5 : bf003660 r4 : 00000000
[ 82.068505] r3 : 0000000c r2 : 0000000a r1 : 00000000 r0 : 00000000
[ 82.075024] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 82.082146] Control: 10c5387d Table: a8cd006a DAC: 00000015
[ 82.087882] Process rmmod (pid: 836, stack limit = 0xe8cc8240)
[ 82.093704] Stack: (0xe8cc9f08 to 0xe8cca000)
[ 82.098055] 9f00: e9a4e040 bf000410 ea1a7a20 c03bbe24 c03bbde0 c02dc12c
[ 82.106221] 9f20: bf003660 ea1a7a20 bf003660 c02dc910 bf003660 bf003704 00000800 c02dbfbc
[ 82.114386] 9f40: 00000000 c0081cdc e9f29018 00000000 bf003704 00000800 e8cc9f4c 656d7461
[ 82.122550] 9f60: 786d5f6c 73745f74 00000000 e98ba63c 00000000 c08c0d74 00000800 c0039d60
[ 82.130716] 9f80: e8c964c0 e8cc8000 e8cc8000 e8cc8000 c000e924 00010ef0 b6f3dd08 00000002
[ 82.138881] 9fa0: 00000000 c000e7a0 b6f3dd08 00000002 b6f3dd38 00000800 0cadcf00 0cadcf00
[ 82.147046] 9fc0: b6f3dd08 00000002 00000000 00000081 b6f3dd08 b6f3d008 beeac848 00000800
[ 82.155211] 9fe0: b6e65070 beeac5c4 b6ee02e9 b6e6507c 80000010 b6f3dd38 00000000 00000000
[ 82.163392] [<c039de7c>] (input_unregister_device) from [<bf000410>] (mxt_remove+0x28/0x44 [atmel_mxt_ts])
[ 82.173042] [<bf000410>] (mxt_remove [atmel_mxt_ts]) from [<c03bbe24>] (i2c_device_remove+0x44/0x5c)
[ 82.182171] [<c03bbe24>] (i2c_device_remove) from [<c02dc12c>] (__device_release_driver+0x70/0xc4)
[ 82.191122] [<c02dc12c>] (__device_release_driver) from [<c02dc910>] (driver_detach+0xac/0xb0)
[ 82.199726] [<c02dc910>] (driver_detach) from [<c02dbfbc>] (bus_remove_driver+0x4c/0x90)
[ 82.207810] [<c02dbfbc>] (bus_remove_driver) from [<c0081cdc>] (SyS_delete_module+0x108/0x194)
[ 82.216417] [<c0081cdc>] (SyS_delete_module) from [<c000e7a0>] (ret_fast_syscall+0x0/0x30)
[ 82.224672] Code: c089ecf0 c0786790 e92d4010 e1a04000 (e5d03364)
[ 82.231059] ---[ end trace e485a1b642f0d1d1 ]---
Segmentation fault
After nothing but insmod:
root@localhost:~# rmmod atmel_mxt_ts
[ 25.499625] Alignment trap: not handling instruction e1923f9f at [<c05ec6d8>]
[ 25.506763] Unhandled fault: alignment exception (0x001) at 0x6b6b6cc7
[ 25.513298] Internal error: : 1 [#1] PREEMPT SMP ARM
[ 25.518260] Modules linked in: atmel_mxt_ts(-)
[ 25.522724] CPU: 0 PID: 831 Comm: rmmod Not tainted 3.16.0-rc7-next-20140729-00011-gead0778e710c-dirty #7
[ 25.532277] task: ea205380 ti: e97d0000 task.ti: e97d0000
[ 25.537674] PC is at _raw_spin_lock_irqsave+0x2c/0x64
[ 25.542724] LR is at devres_remove+0x20/0x80
[ 25.546988] pc : [<c05ec6dc>] lr : [<c02dec90>] psr: 20000193
[ 25.546988] sp : e97d1ed0 ip : e9b5b5c0 fp : 00000800
[ 25.558446] r10: c039dee4 r9 : e97d0000 r8 : c039c278
[ 25.563662] r7 : e9a7d400 r6 : ea1a7a54 r5 : 6b6b6cc7 r4 : 6b6b6b6b
[ 25.570178] r3 : e97d0000 r2 : 6b6b6cc7 r1 : 00000001 r0 : 20000113
[ 25.576696] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
[ 25.583905] Control: 10c5387d Table: a996406a DAC: 00000015
[ 25.589641] Process rmmod (pid: 831, stack limit = 0xe97d0240)
[ 25.595464] Stack: (0xe97d1ed0 to 0xe97d2000)
[ 25.599816] 1ec0: e9a7d400 e9a7d400 00000000 ea1a7a54
[ 25.607983] 1ee0: 00000081 c000e924 00000000 c02df508 e9a7d400 c039de9c e8c16b80 bf0003a4
[ 25.616148] 1f00: 00000019 e8c16b80 bf003660 bf000418 ea1a7a20 c03bbe24 c03bbde0 c02dc12c
[ 25.624313] 1f20: bf003660 ea1a7a20 bf003660 c02dc910 bf003660 bf003704 00000800 c02dbfbc
[ 25.632478] 1f40: 00000000 c0081cdc e9fe0e78 00000000 bf003704 00000800 e97d1f4c 656d7461
[ 25.640644] 1f60: 786d5f6c 73745f74 00000000 ea20587c 00000000 c08c0d74 00000800 c0039d60
[ 25.648808] 1f80: e9b8d880 e97d0000 e97d0000 e97d0000 c000e924 00010ef0 b6fe7d08 00000002
[ 25.656973] 1fa0: 00000000 c000e7a0 b6fe7d08 00000002 b6fe7d38 00000800 7a392d00 7a392d00
[ 25.665138] 1fc0: b6fe7d08 00000002 00000000 00000081 b6fe7d08 b6fe7008 be857858 00000800
[ 25.673303] 1fe0: b6f0f070 be8575d4 b6f8a2e9 b6f0f07c 80000010 b6fe7d38 00000000 00000000
[ 25.681479] [<c05ec6dc>] (_raw_spin_lock_irqsave) from [<c02dec90>] (devres_remove+0x20/0x80)
[ 25.689999] [<c02dec90>] (devres_remove) from [<c02df508>] (devres_destroy+0x8/0x24)
[ 25.697738] [<c02df508>] (devres_destroy) from [<c039de9c>] (input_unregister_device+0x28/0x70)
[ 25.706435] [<c039de9c>] (input_unregister_device) from [<bf0003a4>] (mxt_free_object_table+0x14/0x58 [atmel_mxt_ts])
[ 25.717037] [<bf0003a4>] (mxt_free_object_table [atmel_mxt_ts]) from [<bf000418>] (mxt_remove+0x30/0x44 [atmel_mxt_ts])
[ 25.727813] [<bf000418>] (mxt_remove [atmel_mxt_ts]) from [<c03bbe24>] (i2c_device_remove+0x44/0x5c)
[ 25.736940] [<c03bbe24>] (i2c_device_remove) from [<c02dc12c>] (__device_release_driver+0x70/0xc4)
[ 25.745891] [<c02dc12c>] (__device_release_driver) from [<c02dc910>] (driver_detach+0xac/0xb0)
[ 25.754494] [<c02dc910>] (driver_detach) from [<c02dbfbc>] (bus_remove_driver+0x4c/0x90)
[ 25.762579] [<c02dbfbc>] (bus_remove_driver) from [<c0081cdc>] (SyS_delete_module+0x108/0x194)
[ 25.771184] [<c0081cdc>] (SyS_delete_module) from [<c000e7a0>] (ret_fast_syscall+0x0/0x30)
[ 25.779438] Code: e2811001 e5831004 f592f000 e1923f9f (e2831801)
[ 25.785524] ---[ end trace fd2f70b3c6f48889 ]---
[ 25.790136] note: rmmod[831] exited with preempt_count 1
Segmentation fault
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
