Re: PenMount 6000 usb touch controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2014-05-26 15:18 GMT+02:00 Christian Gmeiner <christian.gmeiner@xxxxxxxxx>:
> Hi.
>
>
> I am using the following usb touch controller:
>
> lsusb -s 6:2 -vvv
>
> Bus 006 Device 002: ID 14e1:6000 Dialogue Technology Corp.
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               1.10
>   bDeviceClass            0 (Defined at Interface level)
>   bDeviceSubClass         0
>   bDeviceProtocol         0
>   bMaxPacketSize0        64
>   idVendor           0x14e1 Dialogue Technology Corp.
>   idProduct          0x6000
>   bcdDevice           a4.b4
>   iManufacturer           1 DIALOGUE INC
>   iProduct                2 PenMount USB
>   iSerial                 0
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength           41
>     bNumInterfaces          1
>     bConfigurationValue     1
>     iConfiguration          4 full speed
>     bmAttributes         0xa0
>       (Bus Powered)
>       Remote Wakeup
>     MaxPower              500mA
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass         3 Human Interface Device
>       bInterfaceSubClass      0 No Subclass
>       bInterfaceProtocol      0 None
>       iInterface              3 EndPoint1 Interrupt Pipe
>         HID Device Descriptor:
>           bLength                 9
>           bDescriptorType        33
>           bcdHID               1.01
>           bCountryCode            0 Not supported
>           bNumDescriptors         1
>           bDescriptorType        34 Report
>           wDescriptorLength      76
>          Report Descriptors:
>            ** UNAVAILABLE **
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0005  1x 5 bytes
>         bInterval               1
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x02  EP 2 OUT
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0005  1x 5 bytes
>         bInterval               1
> Device Status:     0x0000
>   (Bus Powered)
>
>
> I can successfully use this device as a hid-generic usb mouse, but I need to get
> BTN_TOUCH events. What would be the best way to support this device? Shall
> I extend usbtouchscreen driver?

ping

--
Christian Gmeiner, MSc

https://soundcloud.com/christian-gmeiner
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux