Hi Dmitry,
Am Dienstag, 22. April 2014, 21:19:57 schrieb Heiko Stübner:
> From: Heiko Stuebner <heiko.stuebner@xxxxxx>
>
> It's possible that the controller has an individually switchable power
> supply. Therefore add support to control a supplying regulator.
>
> As this is not always the case, the regulator is requested as optional.
>
> Signed-off-by: Heiko Stuebner <heiko.stuebner@xxxxxx>
ping?
Thanks
Heiko
> ---
> .../bindings/input/touchscreen/zforce_ts.txt | 4 +++
> drivers/input/touchscreen/zforce_ts.c | 30
> ++++++++++++++++++++++ 2 files changed, 34 insertions(+)
>
> diff --git
> a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
> b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt index
> 2faf1f1..80c37df 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
> @@ -9,6 +9,9 @@ Required properties:
> - x-size: horizontal resolution of touchscreen
> - y-size: vertical resolution of touchscreen
>
> +Optional properties:
> +- vdd-supply: Regulator controlling the controller supply
> +
> Example:
>
> i2c@00000000 {
> @@ -18,6 +21,7 @@ Example:
> compatible = "neonode,zforce";
> reg = <0x50>;
> interrupts = <2 0>;
> + vdd-supply = <®_zforce_vdd>;
>
> gpios = <&gpio5 6 0>, /* INT */
> <&gpio5 9 0>; /* RST */
> diff --git a/drivers/input/touchscreen/zforce_ts.c
> b/drivers/input/touchscreen/zforce_ts.c index 01d30ce..39ca962 100644
> --- a/drivers/input/touchscreen/zforce_ts.c
> +++ b/drivers/input/touchscreen/zforce_ts.c
> @@ -29,6 +29,8 @@
> #include <linux/sysfs.h>
> #include <linux/input/mt.h>
> #include <linux/platform_data/zforce_ts.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/delay.h>
> #include <linux/of.h>
> #include <linux/of_gpio.h>
>
> @@ -117,6 +119,8 @@ struct zforce_ts {
> const struct zforce_ts_platdata *pdata;
> char phys[32];
>
> + struct regulator *reg_vdd;
> +
> bool suspending;
> bool suspended;
> bool boot_complete;
> @@ -690,6 +694,11 @@ static void zforce_reset(void *data)
> struct zforce_ts *ts = data;
>
> gpio_set_value(ts->pdata->gpio_rst, 0);
> +
> + udelay(10);
> +
> + if (!IS_ERR(ts->reg_vdd))
> + regulator_disable(ts->reg_vdd);
> }
>
> static struct zforce_ts_platdata *zforce_parse_dt(struct device *dev)
> @@ -765,10 +774,31 @@ static int zforce_probe(struct i2c_client *client,
> return ret;
> }
>
> + ts->reg_vdd = devm_regulator_get_optional(&client->dev, "vdd");
> + if (IS_ERR(ts->reg_vdd) && PTR_ERR(ts->reg_vdd) == -EPROBE_DEFER)
> + return PTR_ERR(ts->reg_vdd);
> +
> + if (!IS_ERR(ts->reg_vdd)) {
> + ret = regulator_enable(ts->reg_vdd);
> + if (ret)
> + return ret;
> +
> + /*
> + * according to datasheet add 100us grace time after regular
> + * regulator enable delay.
> + */
> + udelay(100);
> + }
> +
> ret = devm_add_action(&client->dev, zforce_reset, ts);
> if (ret) {
> dev_err(&client->dev, "failed to register reset action, %d\n",
> ret);
> +
> + /* hereafter the regulator will be disabled by the action */
> + if (!IS_ERR(ts->reg_vdd))
> + regulator_disable(ts->reg_vdd);
> +
> return ret;
> }
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
