The extra seven bits are only required when allocating the report buffer. We can not use those extra bytes for the length of the report in the generic implementation of .request because the device might (will) refuse the set_report command. This has been verified on the Atmel touchpad found on the Samsung Ativ 9 plus, which uses hid-multitouch and HID over I2C. Without this fix, the device refuses to switch to the multitouch mode, and it becomes unresponsive from the user point of view. Actually, this has been discussed during the initial submission of the commit 4fa5a7f76cc7b6ac87f57741edd2b124851d119f, see https://patchwork.kernel.org/patch/3621751/ Unfortunately, I completely forgot about it later. Reported-by: Matthias Bayer <thematthiasbayer@xxxxxxxxx> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx> --- Hi Jiri, can you schedule this fix for 3.15? Fortunately, the device required some ACPI changes, so it was not seen at all in 3.13 and before. I am not sure of the status of 3.14, but it is definitively not working in 3.15. Cheers, Benjamin drivers/hid/hid-core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 963a8da..e0f6753 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1253,7 +1253,8 @@ EXPORT_SYMBOL_GPL(hid_output_report); static int hid_report_len(struct hid_report *report) { - return ((report->size - 1) >> 3) + 1 + (report->id > 0) + 7; + /* equivalent to DIV_ROUND_UP(report->size, 8) + !!(report->id > 0) */ + return ((report->size - 1) >> 3) + 1 + (report->id > 0); } /* @@ -1266,7 +1267,7 @@ u8 *hid_alloc_report_buf(struct hid_report *report, gfp_t flags) * of implement() working on 8 byte chunks */ - int len = hid_report_len(report); + int len = hid_report_len(report) + 7; return kmalloc(len, flags); } -- 1.9.0 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
