Touchpad & keyboard LEDS (wifi & mute) not working with hp split x2. Tested with upstream 3.15.0-rc3. I did noticed USB errors at boot time which may be relevant (dmesg at the end below): [ 4.078636] usb 2-6: device descriptor read/64, error -71 [ 4.182641] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3. [ 4.182726] usb 2-6: hub failed to enable device, error -22 [ 4.406874] usb 2-6: device descriptor read/64, error -71 [ 4.510833] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4. [ 4.510919] usb 2-6: hub failed to enable device, error -22 [ 5.031131] usb 2-6: device not accepting address 6, error -71 [ 5.551425] usb 2-6: device not accepting address 7, error -71 Hopefully below all the relevant info that may be helpfull. Let me know if you need anything else to help diagnosing the issue. (attempt #3, previous emails to mailing list may have contained too much info?) $ cat /proc/version Linux version 3.15.0-031500rc3-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201404280035 SMP Mon Apr 28 04:36:21 UTC 2014 $ lsb_release -rd Description: Ubuntu 14.04 LTS Release: 14.04 $ /usr/src/linux-headers-3.15.0-031500rc3/scripts/ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux brutus 3.15.0-031500rc3-generic #201404280035 SMP Mon Apr 28 04:36:21 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Gnu C 4.8 Gnu make 3.81 binutils 2.24 util-linux 2.20.1 mount support module-init-tools 15 e2fsprogs 1.42.9 pcmciautils 018 PPP 2.4.5 Linux C Library 2.19 Dynamic linker (ldd) 2.19 Procps 3.3.9 Net-tools 1.60 Kbd 1.15.5 Sh-utils 8.21 wireless-tools 30 Modules Loaded ctr ccm snd_hda_codec_hdmi snd_hda_codec_idt snd_hda_codec_generic hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_als hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio hid_sensor_iio_common joydev hid_generic hid_sensor_hub hid_multitouch hp_wmi sparse_keymap intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel rfcomm kvm bnep bluetooth crct10dif_pclmul uvcvideo crc32_pclmul videobuf2_vmalloc ghash_clmulni_intel videobuf2_memops snd_hda_intel snd_hda_controller snd_hda_codec aesni_intel snd_hwdep aes_x86_64 lrw gf128mul videobuf2_core videodev glue_helper snd_pcm ablk_helper cryptd arc4 rt2800pci rt2800mmio rt2800lib rt2x00pci rt2x00mmio rt2x00lib usbhid hid mac80211 serio_raw snd_seq_midi cfg80211 snd_seq_midi_event i915 snd_rawmidi eeprom_93cx6 crc_ccitt wmi snd_seq drm_kms_helper snd_seq_device mei_me snd_timer drm mei i2c_algo_bit video lpc_ich snd soundcore mac_hid parport_pc ppdev nls_iso8859_1 lp parport ahci libahci rtsx_pci $ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.15.0-031500rc3-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201404280035 SMP Mon Apr 28 04:36:21 UTC 2014 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.15.0-031500rc3-generic root=UUID=01199aaf-45ab-40c4-9f1f-b0dd8c069a68 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009269efff] usable [ 0.000000] BIOS-e820: [mem 0x000000009269f000-0x000000009289efff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000009289f000-0x0000000092eaefff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000092eaf000-0x0000000092faefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000092faf000-0x0000000092ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000092fff000-0x0000000092ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000093000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by INSYDE Corp. [ 0.000000] efi: ACPI=0x92ffe000 ACPI 2.0=0x92ffe014 SMBIOS=0x92eaef98 [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006f000) (0MB) [ 0.000000] efi: mem02: type=0, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB) [ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB) [ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x000000000009f000) (0MB) [ 0.000000] efi: mem05: type=0, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB) [ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001506000) (20MB) [ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000001506000-0x0000000002000000) (10MB) [ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003406000) (20MB) [ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000003406000-0x0000000035cc0000) (808MB) [ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x0000000035cc0000-0x0000000036e58000) (17MB) [ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000036e58000-0x0000000044ada000) (220MB) [ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x0000000044ada000-0x00000000686b0000) (571MB) [ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000686b0000-0x00000000686d0000) (0MB) [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000686d0000-0x0000000072c3f000) (165MB) [ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x0000000072c3f000-0x0000000072e13000) (1MB) [ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x0000000072e13000-0x00000000736a0000) (8MB) [ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x00000000736a0000-0x00000000736ad000) (0MB) [ 0.000000] efi: mem18: type=2, attr=0xf, range=[0x00000000736ad000-0x00000000736af000) (0MB) [ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000736af000-0x000000007377b000) (0MB) [ 0.000000] efi: mem20: type=1, attr=0xf, range=[0x000000007377b000-0x00000000738af000) (1MB) [ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000738af000-0x00000000777aa000) (62MB) [ 0.000000] efi: mem22: type=4, attr=0xf, range=[0x00000000777aa000-0x000000007802c000) (8MB) [ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x000000007802c000-0x0000000078229000) (1MB) [ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x0000000078229000-0x00000000783b0000) (1MB) [ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000783b0000-0x00000000783b3000) (0MB) [ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000783b3000-0x00000000783b9000) (0MB) [ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000783b9000-0x00000000783ba000) (0MB) [ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000783ba000-0x00000000783e5000) (0MB) [ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000783e5000-0x00000000783e6000) (0MB) [ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000783e6000-0x0000000078539000) (1MB) [ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x0000000078539000-0x000000007853c000) (0MB) [ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x000000007853c000-0x0000000078565000) (0MB) [ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x0000000078565000-0x0000000078567000) (0MB) [ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x0000000078567000-0x0000000078568000) (0MB) [ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x0000000078568000-0x000000007856b000) (0MB) [ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x000000007856b000-0x000000007856f000) (0MB) [ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x000000007856f000-0x0000000078570000) (0MB) [ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x0000000078570000-0x00000000785a3000) (0MB) [ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000785a3000-0x00000000785a5000) (0MB) [ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000785a5000-0x00000000785a8000) (0MB) [ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000785a8000-0x00000000785b4000) (0MB) [ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000785b4000-0x00000000785b5000) (0MB) [ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000785b5000-0x00000000785b9000) (0MB) [ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000785b9000-0x0000000078611000) (0MB) [ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x0000000078611000-0x0000000078612000) (0MB) [ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x0000000078612000-0x0000000078613000) (0MB) [ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x0000000078613000-0x0000000078614000) (0MB) [ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x0000000078614000-0x0000000078615000) (0MB) [ 0.000000] efi: mem49: type=7, attr=0xf, range=[0x0000000078615000-0x0000000078616000) (0MB) [ 0.000000] efi: mem50: type=4, attr=0xf, range=[0x0000000078616000-0x000000007861e000) (0MB) [ 0.000000] efi: mem51: type=7, attr=0xf, range=[0x000000007861e000-0x000000007861f000) (0MB) [ 0.000000] efi: mem52: type=4, attr=0xf, range=[0x000000007861f000-0x0000000078637000) (0MB) [ 0.000000] efi: mem53: type=7, attr=0xf, range=[0x0000000078637000-0x0000000078638000) (0MB) [ 0.000000] efi: mem54: type=4, attr=0xf, range=[0x0000000078638000-0x0000000078677000) (0MB) [ 0.000000] efi: mem55: type=7, attr=0xf, range=[0x0000000078677000-0x0000000078686000) (0MB) [ 0.000000] efi: mem56: type=4, attr=0xf, range=[0x0000000078686000-0x00000000787a1000) (1MB) [ 0.000000] efi: mem57: type=7, attr=0xf, range=[0x00000000787a1000-0x00000000787a2000) (0MB) [ 0.000000] efi: mem58: type=4, attr=0xf, range=[0x00000000787a2000-0x0000000079fcf000) (24MB) [ 0.000000] efi: mem59: type=7, attr=0xf, range=[0x0000000079fcf000-0x00000000921ff000) (386MB) [ 0.000000] efi: mem60: type=2, attr=0xf, range=[0x00000000921ff000-0x000000009220b000) (0MB) [ 0.000000] efi: mem61: type=3, attr=0xf, range=[0x000000009220b000-0x000000009269f000) (4MB) [ 0.000000] efi: mem62: type=5, attr=0x800000000000000f, range=[0x000000009269f000-0x000000009289f000) (2MB) [ 0.000000] efi: mem63: type=6, attr=0x800000000000000f, range=[0x000000009289f000-0x0000000092aaf000) (2MB) [ 0.000000] efi: mem64: type=0, attr=0xf, range=[0x0000000092aaf000-0x0000000092eaf000) (4MB) [ 0.000000] efi: mem65: type=10, attr=0xf, range=[0x0000000092eaf000-0x0000000092faf000) (1MB) [ 0.000000] efi: mem66: type=9, attr=0xf, range=[0x0000000092faf000-0x0000000092fff000) (0MB) [ 0.000000] efi: mem67: type=4, attr=0xf, range=[0x0000000092fff000-0x0000000093000000) (0MB) [ 0.000000] efi: mem68: type=7, attr=0xf, range=[0x0000000100000000-0x000000015f600000) (1526MB) [ 0.000000] efi: mem69: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB) [ 0.000000] efi: mem70: type=0, attr=0x0, range=[0x0000000093000000-0x000000009fa00000) (202MB) [ 0.000000] efi: mem71: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB) [ 0.000000] efi: mem72: type=0, attr=0x0, range=[0x00000000fe101000-0x00000000fe113000) (0MB) [ 0.000000] efi: mem73: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb10000) (0MB) [ 0.000000] efi: mem74: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB) [ 0.000000] efi: mem75: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed1c000) (0MB) [ 0.000000] efi: mem76: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB) [ 0.000000] efi: mem77: type=11, attr=0x8000000000000001, range=[0x00000000fed20000-0x00000000fee01000) (0MB) [ 0.000000] efi: mem78: type=11, attr=0x8000000000000001, range=[0x00000000ffb00000-0x0000000100000000) (5MB) [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP Split 13 x2 PC/215B, BIOS F.24 11/26/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0093000000 mask 7FFF000000 uncachable [ 0.000000] 2 base 0094000000 mask 7FFC000000 uncachable [ 0.000000] 3 base 0098000000 mask 7FF8000000 uncachable [ 0.000000] 4 base 00A0000000 mask 7FE0000000 uncachable [ 0.000000] 5 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 8GB, type WB [ 0.000000] reg 1, base: 2352MB, range: 16MB, type UC [ 0.000000] reg 2, base: 2368MB, range: 64MB, type UC [ 0.000000] reg 3, base: 2432MB, range: 128MB, type UC [ 0.000000] reg 4, base: 2560MB, range: 512MB, type UC [ 0.000000] reg 5, base: 3GB, range: 1GB, type UC [ 0.000000] total RAM covered: 6448M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 5 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 256MB, type WB [ 0.000000] reg 2, base: 2304MB, range: 32MB, type WB [ 0.000000] reg 3, base: 2336MB, range: 16MB, type WB [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB [ 0.000000] e820: update [mem 0x93000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0x93000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff88000007c000] 7c000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02fe4000, 0x02fe4fff] PGTABLE [ 0.000000] BRK [0x02fe5000, 0x02fe5fff] PGTABLE [ 0.000000] BRK [0x02fe6000, 0x02fe6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x15f400000-0x15f5fffff] [ 0.000000] [mem 0x15f400000-0x15f5fffff] page 2M [ 0.000000] BRK [0x02fe7000, 0x02fe7fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15f3fffff] [ 0.000000] [mem 0x15c000000-0x15f3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff] [ 0.000000] [mem 0x100000000-0x13fffffff] page 1G [ 0.000000] [mem 0x140000000-0x15bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9269efff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0x925fffff] page 2M [ 0.000000] [mem 0x92600000-0x9269efff] page 4k [ 0.000000] init_memory_mapping: [mem 0x92fff000-0x92ffffff] [ 0.000000] [mem 0x92fff000-0x92ffffff] page 4k [ 0.000000] BRK [0x02fe8000, 0x02fe8fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35cc0000-0x36e57fff] [ 0.000000] ACPI: RSDP 0x0000000092FFE014 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x0000000092FFE210 0000AC (v01 HPQOEM SLIC-MPC 00000001 HP 01000013) [ 0.000000] ACPI: FACP 0x0000000092FF8000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: DSDT 0x0000000092FE4000 010ECC (v01 HPQOEM 215B 00000000 ACPI 00040000) [ 0.000000] ACPI: FACS 0x0000000092FAA000 000040 [ 0.000000] ACPI: UEFI 0x0000000092FFD000 000236 (v01 HPQOEM 215B 00000001 HP 00040000) [ 0.000000] ACPI: FPDT 0x0000000092FFB000 000044 (v01 HPQOEM 215B 00000001 HP 00040000) [ 0.000000] ACPI: MSDM 0x0000000092FFA000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: ASF! 0x0000000092FF9000 0000A5 (v32 HPQOEM 215B 00000001 HP 00040000) [ 0.000000] ACPI: HPET 0x0000000092FF7000 000038 (v01 HPQOEM 215B 00000001 HP 00040000) [ 0.000000] ACPI: APIC 0x0000000092FF6000 00008C (v03 HPQOEM 215B 00000001 HP 00040000) [ 0.000000] ACPI: MCFG 0x0000000092FF5000 00003C (v01 HPQOEM 215B 00000001 HP 00040000) [ 0.000000] ACPI: SSDT 0x0000000092FE2000 0010BF (v01 HPQOEM 215B 00001000 ACPI 00040000) [ 0.000000] ACPI: BOOT 0x0000000092FE0000 000028 (v01 HPQOEM 215B 00000001 HP 00040000) [ 0.000000] ACPI: LPIT 0x0000000092FDF000 00005C (v01 HPQOEM 215B 00000001 HP 00040000) [ 0.000000] ACPI: ASPT 0x0000000092FDD000 000034 (v07 HPQOEM 215B 00000001 HP 00040000) [ 0.000000] ACPI: DBGP 0x0000000092FDC000 000034 (v01 HPQOEM 215B 00000001 HP 00040000) [ 0.000000] ACPI: SSDT 0x0000000092FDB000 000452 (v01 HPQOEM 215B 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x0000000092FDA000 000AD8 (v01 HPQOEM 215B 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x0000000092FD7000 002A63 (v01 HPQOEM 215B 00003000 ACPI 00040000) [ 0.000000] ACPI: BGRT 0x0000000092FD6000 000038 (v01 HPQOEM 215B 00000001 HP 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000015f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x15f5fffff] [ 0.000000] NODE_DATA [mem 0x15f5f9000-0x15f5fdfff] [ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015ae00000-ffff88015ebfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x15f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0006efff] [ 0.000000] node 0: [mem 0x00070000-0x00087fff] [ 0.000000] node 0: [mem 0x00100000-0x9269efff] [ 0.000000] node 0: [mem 0x92fff000-0x92ffffff] [ 0.000000] node 0: [mem 0x100000000-0x15f5fffff] [ 0.000000] On node 0 totalpages: 990246 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3974 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9307 pages used for memmap [ 0.000000] DMA32 zone: 595616 pages, LIFO batch:31 [ 0.000000] Normal zone: 6104 pages used for memmap [ 0.000000] Normal zone: 390656 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 56 [ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9269f000-0x9289efff] [ 0.000000] PM: Registered nosave memory: [mem 0x9289f000-0x92eaefff] [ 0.000000] PM: Registered nosave memory: [mem 0x92eaf000-0x92faefff] [ 0.000000] PM: Registered nosave memory: [mem 0x92faf000-0x92ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x93000000-0x9f9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff] [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88015f200000 s86592 r8192 d24000 u262144 [ 0.000000] pcpu-alloc: s86592 r8192 d24000 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 974749 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.15.0-031500rc3-generic root=UUID=01199aaf-45ab-40c4-9f1f-b0dd8c069a68 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3743400K/3960984K available (7620K kernel code, 1143K rwdata, 3624K rodata, 1356K init, 1444K bss, 217584K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:1016 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16252928 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1296.919 MHz processor [ 0.000091] Calibrating delay loop (skipped), value calculated using timer frequency.. 2593.83 BogoMIPS (lpj=5187676) [ 0.000099] pid_max: default: 32768 minimum: 301 [ 0.000119] ACPI: Core revision 20140214 [ 0.040175] ACPI: All ACPI Tables successfully acquired [ 0.087020] Security Framework initialized [ 0.087053] AppArmor: AppArmor initialized [ 0.087055] Yama: becoming mindful. [ 0.088025] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.090856] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.092630] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.092647] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.093291] Initializing cgroup subsys memory [ 0.093303] Initializing cgroup subsys devices [ 0.093307] Initializing cgroup subsys freezer [ 0.093311] Initializing cgroup subsys net_cls [ 0.093315] Initializing cgroup subsys blkio [ 0.093319] Initializing cgroup subsys perf_event [ 0.093323] Initializing cgroup subsys hugetlb [ 0.093378] CPU: Physical Processor ID: 0 [ 0.093380] CPU: Processor Core ID: 0 [ 0.093393] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.093393] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.095830] mce: CPU supports 7 MCE banks [ 0.095871] CPU0: Thermal monitoring enabled (TM1) [ 0.095903] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.095903] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.095903] tlb_flushall_shift: 6 [ 0.096200] Freeing SMP alternatives memory: 28K (ffffffff81e72000 - ffffffff81e79000) [ 0.104815] ftrace: allocating 31792 entries in 125 pages [ 0.144256] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.183974] smpboot: CPU0: Intel(R) Core(TM) i3-4010Y CPU @ 1.30GHz (fam: 06, model: 45, stepping: 01) [ 0.183993] TSC deadline timer enabled [ 0.184018] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.184036] ... version: 3 [ 0.184039] ... bit width: 48 [ 0.184042] ... generic registers: 4 [ 0.184045] ... value mask: 0000ffffffffffff [ 0.184047] ... max period: 0000ffffffffffff [ 0.184050] ... fixed-purpose events: 3 [ 0.184053] ... event mask: 000000070000000f [ 0.188754] x86: Booting SMP configuration: [ 0.188759] .... node #0, CPUs: #1 [ 0.205109] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.205330] #2 #3 [ 0.237139] x86: Booted up 1 node, 4 CPUs [ 0.237148] smpboot: Total of 4 processors activated (10375.35 BogoMIPS) [ 0.248932] devtmpfs: initialized [ 0.259445] evm: security.selinux [ 0.259449] evm: security.SMACK64 [ 0.259451] evm: security.ima [ 0.259454] evm: security.capability [ 0.259587] PM: Registering ACPI NVS region [mem 0x92eaf000-0x92faefff] (1048576 bytes) [ 0.261905] pinctrl core: initialized pinctrl subsystem [ 0.262075] regulator-dummy: no parameters [ 0.262134] RTC time: 16:56:03, date: 04/28/14 [ 0.262239] NET: Registered protocol family 16 [ 0.262543] cpuidle: using governor ladder [ 0.262547] cpuidle: using governor menu [ 0.262654] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.262658] ACPI: bus type PCI registered [ 0.262662] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.262819] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.262825] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.335546] PCI: Using configuration type 1 for base access [ 0.339519] ACPI: Added _OSI(Module Device) [ 0.339526] ACPI: Added _OSI(Processor Device) [ 0.339530] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.339533] ACPI: Added _OSI(Processor Aggregator Device) [ 0.349561] ACPI: Executed 1 blocks of module-level executable AML code [ 0.359281] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.364958] ACPI: SSDT 0x0000000092E71C18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) [ 0.366247] ACPI: Dynamic OEM Table Load: [ 0.366253] ACPI: SSDT 0x0000000000000000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) [ 0.369311] ACPI: SSDT 0x0000000092E71618 0005AA (v01 PmRef ApIst 00003000 INTL 20120816) [ 0.371156] ACPI: Dynamic OEM Table Load: [ 0.371162] ACPI: SSDT 0x0000000000000000 0005AA (v01 PmRef ApIst 00003000 INTL 20120816) [ 0.372876] ACPI: SSDT 0x0000000092E69D98 000119 (v01 PmRef ApCst 00003000 INTL 20120816) [ 0.374177] ACPI: Dynamic OEM Table Load: [ 0.374182] ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef ApCst 00003000 INTL 20120816) [ 0.886650] ACPI: Interpreter enabled [ 0.886675] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580) [ 0.886694] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580) [ 0.886749] ACPI: (supports S0 S3 S4 S5) [ 0.886753] ACPI: Using IOAPIC for interrupt routing [ 0.886833] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.890153] acpi HPQC0003:00: ACPI dock station (docks/bays count: 1) [ 0.903577] ACPI: \_PR_.CPU4: failed to get CPU APIC ID. [ 0.903590] ACPI: \_PR_.CPU5: failed to get CPU APIC ID. [ 0.903599] ACPI: \_PR_.CPU6: failed to get CPU APIC ID. [ 0.903608] ACPI: \_PR_.CPU7: failed to get CPU APIC ID. [ 0.904937] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.904951] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.905158] \_SB_.PCI0:_OSC invalid UUID [ 0.905161] _OSC request data:1 1f 0 [ 0.905173] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.906626] PCI host bridge to bus 0000:00 [ 0.906635] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.906641] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.906646] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.906650] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.906655] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] [ 0.906659] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] [ 0.906663] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] [ 0.906668] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff] [ 0.906672] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.906676] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.906681] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.906685] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.906689] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff] [ 0.906712] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.907057] pci 0000:00:02.0: [8086:0a1e] type 00 class 0x030000 [ 0.907091] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit] [ 0.907111] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.907125] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.907462] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.907485] pci 0000:00:03.0: reg 0x10: [mem 0xb0610000-0xb0613fff 64bit] [ 0.907869] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.907904] pci 0000:00:14.0: reg 0x10: [mem 0xb0600000-0xb060ffff 64bit] [ 0.908014] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.908214] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.908320] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.908358] pci 0000:00:16.0: reg 0x10: [mem 0xb0618000-0xb061801f 64bit] [ 0.908479] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.908786] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.908813] pci 0000:00:1b.0: reg 0x10: [mem 0xb0614000-0xb0617fff 64bit] [ 0.908937] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.909223] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400 [ 0.909344] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.909568] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.909666] pci 0000:00:1c.1: [8086:9c12] type 01 class 0x060400 [ 0.909787] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.909991] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.910089] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400 [ 0.910209] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.910413] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.910527] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.910564] pci 0000:00:1d.0: reg 0x10: [mem 0xb061c000-0xb061c3ff] [ 0.910714] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.910945] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.911046] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 0.911483] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.911515] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.911530] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.911545] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.911561] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.911576] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.911591] pci 0000:00:1f.2: reg 0x24: [mem 0xb061b000-0xb061b7ff] [ 0.911663] pci 0000:00:1f.2: PME# supported from D3hot [ 0.911939] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.911968] pci 0000:00:1f.3: reg 0x10: [mem 0xb0619000-0xb06190ff 64bit] [ 0.912005] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f] [ 0.912393] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.912629] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000 [ 0.912700] pci 0000:02:00.0: reg 0x10: [mem 0xb0500000-0xb0500fff] [ 0.913208] pci 0000:02:00.0: supports D1 D2 [ 0.913213] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.921451] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.921464] pci 0000:00:1c.1: bridge window [mem 0xb0500000-0xb05fffff] [ 0.921629] pci 0000:03:00.0: [1814:3290] type 00 class 0x028000 [ 0.921671] pci 0000:03:00.0: reg 0x10: [mem 0xb0410000-0xb041ffff] [ 0.921868] pci 0000:03:00.0: PME# supported from D0 D3hot [ 0.922035] pci 0000:03:00.1: [1814:3298] type 00 class 0x0d1100 [ 0.922077] pci 0000:03:00.1: reg 0x10: [mem 0xb0400000-0xb040ffff] [ 0.922273] pci 0000:03:00.1: supports D1 [ 0.922277] pci 0000:03:00.1: PME# supported from D0 D1 D3hot [ 0.933468] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.933479] pci 0000:00:1c.2: bridge window [mem 0xb0400000-0xb04fffff] [ 0.934375] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.934501] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.934624] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.934741] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.934854] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.934968] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.935082] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.935195] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.935527] ACPI: Enabled 4 GPEs in block 00 to 7F [ 0.935662] ACPI : EC: GPE = 0x8, I/O: command/status = 0x66, data = 0x62 [ 0.935943] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.935953] vgaarb: loaded [ 0.935956] vgaarb: bridge control possible 0000:00:02.0 [ 0.936450] SCSI subsystem initialized [ 0.936572] libata version 3.00 loaded. [ 0.936633] ACPI: bus type USB registered [ 0.936680] usbcore: registered new interface driver usbfs [ 0.936703] usbcore: registered new interface driver hub [ 0.936763] usbcore: registered new device driver usb [ 0.937176] PCI: Using ACPI for IRQ routing [ 0.947315] PCI: pci_cache_line_size set to 64 bytes [ 0.947408] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff] [ 0.947413] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff] [ 0.947416] e820: reserve RAM buffer [mem 0x9269f000-0x93ffffff] [ 0.947421] e820: reserve RAM buffer [mem 0x93000000-0x93ffffff] [ 0.947425] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff] [ 0.947668] NetLabel: Initializing [ 0.947671] NetLabel: domain hash size = 128 [ 0.947674] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.947705] NetLabel: unlabeled traffic allowed by default [ 0.947847] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.947862] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.949942] Switched to clocksource hpet [ 0.965424] AppArmor: AppArmor Filesystem Enabled [ 0.965487] pnp: PnP ACPI init [ 0.965522] ACPI: bus type PNP registered [ 0.966534] pnp 00:00: [dma 4] [ 0.966607] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.966673] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.966943] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.967122] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.967128] system 00:03: [io 0xffff] has been reserved [ 0.967133] system 00:03: [io 0xffff] has been reserved [ 0.967143] system 00:03: [io 0xffff] has been reserved [ 0.967149] system 00:03: [io 0x1800-0x18fe] could not be reserved [ 0.967153] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.967158] system 00:03: [io 0x0454-0x0457] has been reserved [ 0.967163] system 00:03: [io 0x0380-0x0387] has been reserved [ 0.967171] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.967294] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.967395] pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 0.968061] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.968068] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.968073] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.968078] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.968084] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 0.968089] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.968094] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.968099] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved [ 0.968105] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.968110] system 00:06: [mem 0x9fa22000-0x9fa22fff] has been reserved [ 0.968115] system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved [ 0.968122] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.968704] pnp 00:07: Plug and Play ACPI device, IDs INTcfd9 PNP0c40 (active) [ 0.968914] pnp: PnP ACPI: found 8 devices [ 0.968917] ACPI: bus type PNP unregistered [ 0.978206] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.978217] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 0.978222] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 [ 0.978257] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.978263] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.978268] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.978287] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fcfffff] [ 0.978308] pci 0000:00:1c.0: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref] [ 0.978316] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.978323] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.978329] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.978339] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fcfffff] [ 0.978347] pci 0000:00:1c.0: bridge window [mem 0x9fd00000-0x9fefffff 64bit pref] [ 0.978359] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.978369] pci 0000:00:1c.1: bridge window [mem 0xb0500000-0xb05fffff] [ 0.978384] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.978393] pci 0000:00:1c.2: bridge window [mem 0xb0400000-0xb04fffff] [ 0.978410] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.978415] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.978420] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.978425] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.978429] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.978433] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.978438] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff] [ 0.978442] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff] [ 0.978447] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff] [ 0.978451] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff] [ 0.978455] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff] [ 0.978460] pci_bus 0000:00: resource 15 [mem 0x9fa00000-0xfeafffff] [ 0.978465] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.978469] pci_bus 0000:01: resource 1 [mem 0x9fb00000-0x9fcfffff] [ 0.978474] pci_bus 0000:01: resource 2 [mem 0x9fd00000-0x9fefffff 64bit pref] [ 0.978479] pci_bus 0000:02: resource 1 [mem 0xb0500000-0xb05fffff] [ 0.978484] pci_bus 0000:03: resource 1 [mem 0xb0400000-0xb04fffff] [ 0.978556] NET: Registered protocol family 2 [ 0.978948] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.979260] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.979680] TCP: Hash tables configured (established 32768 bind 32768) [ 0.979728] TCP: reno registered [ 0.979748] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.979817] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.979978] NET: Registered protocol family 1 [ 0.980006] pci 0000:00:02.0: Boot video device [ 0.998232] PCI: CLS 64 bytes, default 64 [ 0.998375] Trying to unpack rootfs image as initramfs... [ 1.936493] Freeing initrd memory: 18016K (ffff880035cc0000 - ffff880036e58000) [ 1.936505] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.936512] software IO TLB [mem 0x8e20b000-0x9220b000] (64MB) mapped at [ffff88008e20b000-ffff88009220afff] [ 1.936642] Simple Boot Flag at 0x44 set to 0x1 [ 1.937128] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x14 [ 1.937145] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x14 [ 1.937163] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x14 [ 1.937185] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x14 [ 1.937314] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 1.937359] Scanning for low memory corruption every 60 seconds [ 1.938255] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.938332] Initialise system trusted keyring [ 1.938372] audit: initializing netlink subsys (disabled) [ 1.938406] audit: type=2000 audit(1398704164.824:1): initialized [ 2.031283] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.035658] VFS: Disk quotas dquot_6.5.2 [ 2.035758] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.036918] fuse init (API version 7.23) [ 2.037135] msgmni has been set to 7448 [ 2.037282] Key type big_key registered [ 2.038954] Key type asymmetric registered [ 2.038960] Asymmetric key parser 'x509' registered [ 2.039104] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.039188] io scheduler noop registered [ 2.039192] io scheduler deadline registered (default) [ 2.039274] io scheduler cfq registered [ 2.039442] pcieport 0000:00:1c.0: device [8086:9c10] has invalid IRQ; check vendor BIOS [ 2.039799] pcieport 0000:00:1c.1: device [8086:9c12] has invalid IRQ; check vendor BIOS [ 2.040070] pcieport 0000:00:1c.2: device [8086:9c14] has invalid IRQ; check vendor BIOS [ 2.040383] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.040421] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.040547] efifb: probing for efifb [ 2.041815] efifb: framebuffer at 0xa0000000, mapped to 0xffffc90010800000, using 4160k, total 4160k [ 2.041820] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 2.041822] efifb: scrolling: redraw [ 2.041827] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.048742] Console: switching to colour frame buffer device 170x48 [ 2.055346] fb0: EFI VGA frame buffer device [ 2.055381] intel_idle: MWAIT substates: 0x11142120 [ 2.055384] intel_idle: v0.4 model 0x45 [ 2.055387] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.056018] ipmi message handler version 39.2 [ 2.056603] ACPI: AC Adapter [ACAD] (on-line) [ 2.056936] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 2.057523] ACPI: Lid Switch [LID0] [ 2.057641] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 2.057650] ACPI: Power Button [PWRB] [ 2.057779] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.057785] ACPI: Power Button [PWRF] [ 2.059466] [Firmware Bug]: Invalid critical threshold (0) [ 2.061319] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.061328] ACPI: Thermal Zone [TZ01] (46 C) [ 2.061398] GHES: HEST is not enabled! [ 2.061641] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.066108] Linux agpgart interface v0.103 [ 2.069392] brd: module loaded [ 2.071128] loop: module loaded [ 2.072138] libphy: Fixed MDIO Bus: probed [ 2.072400] tun: Universal TUN/TAP device driver, 1.6 [ 2.072403] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 2.072512] PPP generic driver version 2.4.2 [ 2.072620] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.072630] ehci-pci: EHCI PCI platform driver [ 2.072922] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.072937] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.072961] ehci-pci 0000:00:1d.0: debug port 2 [ 2.076896] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.076954] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb061c000 [ 2.086648] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.086761] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.086766] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.086770] usb usb1: Product: EHCI Host Controller [ 2.086775] usb usb1: Manufacturer: Linux 3.15.0-031500rc3-generic ehci_hcd [ 2.086779] usb usb1: SerialNumber: 0000:00:1d.0 [ 2.087131] hub 1-0:1.0: USB hub found [ 2.087148] hub 1-0:1.0: 2 ports detected [ 2.087469] ehci-platform: EHCI generic platform driver [ 2.087494] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.087504] ohci-pci: OHCI PCI platform driver [ 2.087529] ohci-platform: OHCI generic platform driver [ 2.087545] uhci_hcd: USB Universal Host Controller Interface driver [ 2.087857] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.087870] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.087998] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.088036] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X [ 2.088174] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.088179] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.088184] usb usb2: Product: xHCI Host Controller [ 2.088188] usb usb2: Manufacturer: Linux 3.15.0-031500rc3-generic xhci_hcd [ 2.088192] usb usb2: SerialNumber: 0000:00:14.0 [ 2.088591] hub 2-0:1.0: USB hub found [ 2.088619] hub 2-0:1.0: 9 ports detected [ 2.090360] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.090371] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.090465] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.090471] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.090475] usb usb3: Product: xHCI Host Controller [ 2.090480] usb usb3: Manufacturer: Linux 3.15.0-031500rc3-generic xhci_hcd [ 2.090484] usb usb3: SerialNumber: 0000:00:14.0 [ 2.090876] hub 3-0:1.0: USB hub found [ 2.090896] hub 3-0:1.0: 4 ports detected [ 2.091607] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.091612] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.094071] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.094380] mousedev: PS/2 mouse device common for all mice [ 2.094928] rtc_cmos 00:04: RTC can wake from S4 [ 2.095195] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.095254] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.095421] device-mapper: uevent: version 1.0.3 [ 2.095638] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx [ 2.095653] Intel P-state driver initializing. [ 2.095686] Intel pstate controlling: cpu 0 [ 2.095765] Intel pstate controlling: cpu 1 [ 2.095806] Intel pstate controlling: cpu 2 [ 2.095844] Intel pstate controlling: cpu 3 [ 2.095910] ledtrig-cpu: registered to indicate activity on CPUs [ 2.095913] EFI Variables Facility v0.08 2004-May-17 [ 2.102957] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.132768] TCP: cubic registered [ 2.132970] NET: Registered protocol family 10 [ 2.133077] ACPI: Battery Slot [BAT0] (battery present) [ 2.133340] NET: Registered protocol family 17 [ 2.133361] Key type dns_resolver registered [ 2.133993] Loading compiled-in X.509 certificates [ 2.135506] Loaded X.509 cert 'Magrathea: Glacier signing key: 3b6ee6fabf4d42471d6891c3594f54a0c9cb277a' [ 2.135524] registered taskstats version 1 [ 2.138487] Key type trusted registered [ 2.141059] Key type encrypted registered [ 2.143578] AppArmor: AppArmor sha1 policy hashing enabled [ 2.143584] ima: No TPM chip found, activating TPM-bypass! [ 2.144149] Magic number: 10:679:945 [ 2.144183] tty tty2: hash matches [ 2.144211] processor cpu0: hash matches [ 2.144260] rtc_cmos 00:04: setting system clock to 2014-04-28 16:56:05 UTC (1398704165) [ 2.144324] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.144326] EDD information not available. [ 2.144412] PM: Hibernation image not present or could not be loaded. [ 2.398986] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.531572] usb 1-1: New USB device found, idVendor=8087, idProduct=8000 [ 2.531581] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.532045] hub 1-1:1.0: USB hub found [ 2.532225] hub 1-1:1.0: 8 ports detected [ 2.692674] ACPI: Battery Slot [BAT1] (battery present) [ 2.695261] Freeing unused kernel memory: 1356K (ffffffff81d1f000 - ffffffff81e72000) [ 2.695264] Write protecting the kernel read-only data: 12288k [ 2.697552] Freeing unused kernel memory: 560K (ffff880002774000 - ffff880002800000) [ 2.699079] usb 2-3: new high-speed USB device number 2 using xhci_hcd [ 2.699360] Freeing unused kernel memory: 472K (ffff880002b8a000 - ffff880002c00000) [ 2.722905] systemd-udevd[125]: starting version 204 [ 2.756285] rtsx_pci 0000:02:00.0: irq 57 for MSI/MSI-X [ 2.756326] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 57 [ 2.760398] ahci 0000:00:1f.2: version 3.0 [ 2.760609] ahci 0000:00:1f.2: irq 58 for MSI/MSI-X [ 2.760657] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode [ 2.760661] ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm sds apst [ 2.761589] scsi0 : ahci [ 2.761760] scsi1 : ahci [ 2.763574] scsi2 : ahci [ 2.767087] scsi3 : ahci [ 2.767227] ata1: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b100 irq 58 [ 2.767233] ata2: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b180 irq 58 [ 2.767236] ata3: DUMMY [ 2.767239] ata4: DUMMY [ 2.855352] rtsx_pci: probe of 0000:02:00.0 failed with error -110 [ 2.901654] usb 2-3: New USB device found, idVendor=1bcf, idProduct=2c40 [ 2.901665] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.901670] usb 2-3: Product: HP TrueVision Full HD [ 2.901674] usb 2-3: Manufacturer: DDNKQ019I5A8HS [ 2.935268] tsc: Refined TSC clocksource calibration: 1296.997 MHz [ 3.071417] usb 2-5: new full-speed USB device number 3 using xhci_hcd [ 3.087365] ata2: SATA link down (SStatus 0 SControl 300) [ 3.087400] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.088577] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 3.088586] ata1.00: ATA-9: SAMSUNG MZMTD128HAFV-000H1, DXT41H0Q, max UDMA/133 [ 3.088591] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.089276] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 3.089435] ata1.00: configured for UDMA/133 [ 3.089745] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMTD128 DXT4 PQ: 0 ANSI: 5 [ 3.090324] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 3.090415] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.090611] sd 0:0:0:0: [sda] Write Protect is off [ 3.090621] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.090697] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.093680] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 3.095697] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.143542] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 3.201237] usb 2-5: New USB device found, idVendor=0483, idProduct=91d1 [ 3.201246] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.201251] usb 2-5: Product: ST_SENSOR_HUB [ 3.201255] usb 2-5: Manufacturer: STMicroelectronics [ 3.201259] usb 2-5: SerialNumber: ST_SENSOR_HUB [ 3.367597] usb 2-6: new full-speed USB device number 4 using xhci_hcd [ 3.497497] usb 2-6: New USB device found, idVendor=06cb, idProduct=5710 [ 3.497506] usb 2-6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.497511] usb 2-6: Product: Synaptics Touch Pad V 103S [ 3.663732] usb 2-8: new full-speed USB device number 5 using xhci_hcd [ 3.936035] Switched to clocksource tsc [ 8.796123] usb 2-8: New USB device found, idVendor=04f3, idProduct=0117 [ 8.796133] usb 2-8: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 8.796138] usb 2-8: Product: Touchscreen [ 8.796142] usb 2-8: Manufacturer: ELAN [ 8.796400] usb 2-8: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 8.872830] random: init urandom read with 62 bits of entropy available [ 8.910877] init: plymouth-upstart-bridge main process (190) terminated with status 1 [ 8.910905] init: plymouth-upstart-bridge main process ended, respawning [ 8.922092] init: plymouth-upstart-bridge main process (200) terminated with status 1 [ 8.922119] init: plymouth-upstart-bridge main process ended, respawning [ 8.930158] init: ureadahead main process (193) terminated with status 5 [ 8.930441] init: plymouth-upstart-bridge main process (203) terminated with status 1 [ 8.930454] init: plymouth-upstart-bridge main process ended, respawning [ 9.139409] Adding 3906556k swap on /dev/sda7. Priority:-1 extents:1 across:3906556k SSFS [ 9.241870] systemd-udevd[324]: starting version 204 [ 9.294645] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro [ 9.325743] lp: driver loaded but no devices found [ 9.353035] ppdev: user-space parallel port driver [ 9.466815] [drm] Initialized drm 1.1.0 20060810 [ 9.476241] mei_me 0000:00:16.0: irq 57 for MSI/MSI-X [ 9.520541] wmi: Mapper loaded [ 9.566851] random: nonblocking pool is initialized [ 9.577872] cfg80211: Calling CRDA to update world regulatory domain [ 9.632162] hidraw: raw HID events driver (C) Jiri Kosina [ 9.643918] [drm] Memory usable by graphics device = 2048M [ 9.643926] checking generic (a0000000 410000) vs hw (a0000000 10000000) [ 9.643930] fb: switching to inteldrmfb from EFI VGA [ 9.643973] Console: switching to colour dummy device 80x25 [ 9.678267] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected [ 9.681835] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected [ 9.701775] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 9.724347] usbcore: registered new interface driver usbhid [ 9.724354] usbhid: USB HID core driver [ 9.752457] i915 0000:00:02.0: irq 59 for MSI/MSI-X [ 9.752482] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.752484] [drm] Driver supports precise vblank timestamp query. [ 9.752530] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 9.769194] Linux video capture interface: v2.00 [ 9.808077] AVX2 version of gcm_enc/dec engaged. [ 9.930434] uvcvideo: Found UVC 1.00 device HP TrueVision Full HD (1bcf:2c40) [ 9.953955] fbcon: inteldrmfb (fb0) is primary device [ 10.004533] Bluetooth: Core ver 2.19 [ 10.004596] NET: Registered protocol family 31 [ 10.004598] Bluetooth: HCI device and connection manager initialized [ 10.004610] Bluetooth: HCI socket layer initialized [ 10.004743] Bluetooth: L2CAP socket layer initialized [ 10.004753] Bluetooth: SCO socket layer initialized [ 10.014835] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.014836] Bluetooth: BNEP filters: protocol multicast [ 10.014847] Bluetooth: BNEP socket layer initialized [ 10.043741] input: HP TrueVision Full HD as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/input/input4 [ 10.043939] usbcore: registered new interface driver uvcvideo [ 10.043940] USB Video Class driver (1.1.1) [ 10.102621] input: HP WMI hotkeys as /devices/virtual/input/input5 [ 10.111756] cfg80211: World regulatory domain updated: [ 10.111759] cfg80211: DFS Master region: unset [ 10.111760] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 10.111764] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 10.111767] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 10.111769] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 10.111772] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 10.111775] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 10.128262] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/0003:04F3:0117.0003/input/input6 [ 10.128783] hid-multitouch 0003:04F3:0117.0003: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-8/input0 [ 10.912202] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 11.036179] Console: switching to colour frame buffer device 170x48 [ 11.042893] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 11.042896] i915 0000:00:02.0: registered panic notifier [ 11.044903] Bluetooth: RFCOMM TTY layer initialized [ 11.044918] Bluetooth: RFCOMM socket layer initialized [ 11.044927] Bluetooth: RFCOMM ver 1.11 [ 11.058305] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 11.058968] acpi device:2d: registered as cooling_device5 [ 11.059148] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 11.059283] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 11.061452] snd_hda_intel 0000:00:1b.0: irq 60 for MSI/MSI-X [ 11.068215] snd_hda_intel 0000:00:03.0: irq 61 for MSI/MSI-X [ 11.091072] sound hdaudioC1D0: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 11.091082] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.091087] sound hdaudioC1D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0) [ 11.091091] sound hdaudioC1D0: mono: mono_out=0x0 [ 11.091094] sound hdaudioC1D0: inputs: [ 11.091099] sound hdaudioC1D0: Internal Mic=0xe [ 11.091104] sound hdaudioC1D0: Mic=0xb [ 11.095574] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 [ 11.095699] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 [ 11.095833] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 11.102664] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 11.102816] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 11.130931] audit: type=1400 audit(1398718574.478:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=629 comm="apparmor_parser" [ 11.130939] audit: type=1400 audit(1398718574.478:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=629 comm="apparmor_parser" [ 11.131609] audit: type=1400 audit(1398718574.478:4): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=629 comm="apparmor_parser" [ 11.230512] audit: type=1400 audit(1398718574.578:5): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=645 comm="apparmor_parser" [ 11.230525] audit: type=1400 audit(1398718574.578:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=645 comm="apparmor_parser" [ 11.230533] audit: type=1400 audit(1398718574.578:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=645 comm="apparmor_parser" [ 11.231383] audit: type=1400 audit(1398718574.578:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=645 comm="apparmor_parser" [ 11.231392] audit: type=1400 audit(1398718574.578:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=645 comm="apparmor_parser" [ 11.231822] audit: type=1400 audit(1398718574.578:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=645 comm="apparmor_parser" [ 11.369877] init: failsafe main process (656) killed by TERM signal [ 11.580983] audit: type=1400 audit(1398718574.930:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=779 comm="apparmor_parser" [ 11.743451] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin' [ 11.746073] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37 [ 11.792818] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.545091] init: plymouth-upstart-bridge main process ended, respawning [ 12.558592] init: plymouth-upstart-bridge main process (1120) terminated with status 1 [ 12.558612] init: plymouth-upstart-bridge main process ended, respawning [ 13.833867] ahci 0000:00:1f.2: port does not support device sleep [ 13.975037] wlan0: authenticate with 64:70:02:e2:9b:99 [ 13.990139] wlan0: send auth to 64:70:02:e2:9b:99 (try 1/3) [ 13.992059] wlan0: authenticated [ 13.994029] wlan0: associate with 64:70:02:e2:9b:99 (try 1/3) [ 13.997296] wlan0: RX AssocResp from 64:70:02:e2:9b:99 (capab=0x431 status=0 aid=6) [ 13.997384] wlan0: associated [ 13.997430] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 13.997523] cfg80211: Calling CRDA for country: CA [ 14.003183] cfg80211: Regulatory domain changed to country: CA [ 14.003191] cfg80211: DFS Master region: unset [ 14.003193] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 14.003200] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 14.003204] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A) [ 14.003209] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s) [ 14.003212] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s) [ 14.003216] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 14.124553] wlan0: deauthenticating from 64:70:02:e2:9b:99 by local choice (Reason: 2=PREV_AUTH_NOT_VALID) [ 14.146190] wlan0: authenticate with 64:70:02:e2:9b:99 [ 14.154180] wlan0: send auth to 64:70:02:e2:9b:99 (try 1/3) [ 14.155496] cfg80211: Calling CRDA to update world regulatory domain [ 14.159594] cfg80211: World regulatory domain updated: [ 14.159602] cfg80211: DFS Master region: unset [ 14.159605] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 14.159611] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 14.159616] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 14.159621] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 14.159625] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 14.159629] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 14.164806] wlan0: authenticated [ 14.166094] wlan0: associate with 64:70:02:e2:9b:99 (try 1/3) [ 14.169333] wlan0: RX AssocResp from 64:70:02:e2:9b:99 (capab=0x431 status=0 aid=6) [ 14.169444] wlan0: associated [ 14.169745] cfg80211: Calling CRDA for country: CA [ 14.173991] cfg80211: Regulatory domain changed to country: CA [ 14.173999] cfg80211: DFS Master region: unset [ 14.174002] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 14.174007] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 14.174011] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A) [ 14.174015] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s) [ 14.174019] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s) [ 14.174022] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 20.133764] hid-generic 0003:06CB:5710.0002: usb_submit_urb(ctrl) failed: -1 [ 20.133781] hid-generic 0003:06CB:5710.0002: timeout initializing reports [ 20.133900] input: Synaptics Touch Pad V 103S as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/0003:06CB:5710.0002/input/input14 [ 20.134672] hid-generic 0003:06CB:5710.0002: input,hiddev0,hidraw1: USB HID v1.11 Pointer [Synaptics Touch Pad V 103S ] on usb-0000:00:14.0-6/input0 [ 299.968830] mce: [Hardware Error]: Machine check events logged -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
