at91_adc now supports reading a touchscreen for ADCs without a TSMR register.
Enable touchscreen support through at91_adc. This allows to use both a
touchscreen and the remaining ADC channel at the same time.
Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
---
arch/arm/mach-at91/board-sam9rlek.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 604eecf6cd70..35d420247e25 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -18,6 +18,7 @@
#include <linux/clk.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
+#include <linux/platform_data/at91_adc.h>
#include <video/atmel_lcdc.h>
@@ -239,6 +240,17 @@ static struct at91_tsadcc_data ek_tsadcc_data = {
/*
+ * ADC + Touchscreen
+ */
+static struct at91_adc_data ek_adc_data = {
+ .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5),
+ .use_external_triggers = true,
+ .vref = 3300,
+ .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE,
+};
+
+
+/*
* GPIO Buttons
*/
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
@@ -312,6 +324,8 @@ static void __init ek_board_init(void)
at91_add_device_ac97(&ek_ac97_data);
/* Touch Screen Controller */
at91_add_device_tsadcc(&ek_tsadcc_data);
+ /* Touch Screen Controller + ADC */
+ at91_add_device_adc(&ek_adc_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* Push Buttons */
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
