On Sat, 8 Mar 2014 22:52:42 -0500
Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx> wrote:
> hid_out_raw_report is going to be obsoleted as it is not part of the
> unified HID low level transport documentation
> (Documentation/hid/hid-transport.txt)
>
> To do so, we need to introduce two new quirks:
> * HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP: this quirks prevents the
> transport driver to use the interrupt channel to send output report
> (and thus force to use HID_REQ_SET_REPORT command)
> * HID_QUIRK_SKIP_OUTPUT_REPORT_ID: this one forces usbhid to not
> include the report ID in the buffer it sends to the device through
> HID_REQ_SET_REPORT in case of an output report
>
> This also fixes a regression introduced in commit 3a75b24949a8
> (HID: hidraw: replace hid_output_raw_report() calls by appropriates ones).
> The hidraw API was not able to communicate with the PS3 SixAxis
> controllers in USB mode.
>
> Reviewed-by: David Herrmann <dh.herrmann@xxxxxxxxx>
> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
>
I confirm that using hidraw via USB works again now, thanks, so the
patch is OK:
Tested-by: Antonio Ospite <ao2@xxxxxx>
However I still get the failure with hidraw via BT, I am going to look
into that.
> ---
> changes in v3:
> - no changes
>
> changes in v2:
> - removed usb.h include
> - renamed HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP
> - fix typo
>
>
> drivers/hid/hid-sony.c | 60 ++++++++++---------------------------------
> drivers/hid/hidraw.c | 3 ++-
> drivers/hid/usbhid/hid-core.c | 7 ++++-
> include/linux/hid.h | 2 ++
> 4 files changed, 24 insertions(+), 48 deletions(-)
>
> diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
> index b5fe65e..4884bb5 100644
> --- a/drivers/hid/hid-sony.c
> +++ b/drivers/hid/hid-sony.c
> @@ -29,7 +29,6 @@
> #include <linux/hid.h>
> #include <linux/module.h>
> #include <linux/slab.h>
> -#include <linux/usb.h>
> #include <linux/leds.h>
> #include <linux/power_supply.h>
> #include <linux/spinlock.h>
> @@ -1007,45 +1006,6 @@ static int sony_mapping(struct hid_device *hdev, struct hid_input *hi,
> }
>
> /*
> - * The Sony Sixaxis does not handle HID Output Reports on the Interrupt EP
> - * like it should according to usbhid/hid-core.c::usbhid_output_raw_report()
> - * so we need to override that forcing HID Output Reports on the Control EP.
> - *
> - * There is also another issue about HID Output Reports via USB, the Sixaxis
> - * does not want the report_id as part of the data packet, so we have to
> - * discard buf[0] when sending the actual control message, even for numbered
> - * reports, humpf!
> - */
> -static int sixaxis_usb_output_raw_report(struct hid_device *hid, __u8 *buf,
> - size_t count, unsigned char report_type)
> -{
> - struct usb_interface *intf = to_usb_interface(hid->dev.parent);
> - struct usb_device *dev = interface_to_usbdev(intf);
> - struct usb_host_interface *interface = intf->cur_altsetting;
> - int report_id = buf[0];
> - int ret;
> -
> - if (report_type == HID_OUTPUT_REPORT) {
> - /* Don't send the Report ID */
> - buf++;
> - count--;
> - }
> -
> - ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
> - HID_REQ_SET_REPORT,
> - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
> - ((report_type + 1) << 8) | report_id,
> - interface->desc.bInterfaceNumber, buf, count,
> - USB_CTRL_SET_TIMEOUT);
> -
> - /* Count also the Report ID, in case of an Output report. */
> - if (ret > 0 && report_type == HID_OUTPUT_REPORT)
> - ret++;
> -
> - return ret;
> -}
> -
> -/*
> * Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller
> * to "operational". Without this, the ps3 controller will not report any
> * events.
> @@ -1305,11 +1265,8 @@ static void sixaxis_state_worker(struct work_struct *work)
> buf[10] |= sc->led_state[2] << 3;
> buf[10] |= sc->led_state[3] << 4;
>
> - if (sc->quirks & SIXAXIS_CONTROLLER_USB)
> - hid_output_raw_report(sc->hdev, buf, sizeof(buf), HID_OUTPUT_REPORT);
> - else
> - hid_hw_raw_request(sc->hdev, 0x01, buf, sizeof(buf),
> - HID_OUTPUT_REPORT, HID_REQ_SET_REPORT);
> + hid_hw_raw_request(sc->hdev, 0x01, buf, sizeof(buf), HID_OUTPUT_REPORT,
> + HID_REQ_SET_REPORT);
> }
>
> static void dualshock4_state_worker(struct work_struct *work)
> @@ -1659,7 +1616,18 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
> }
>
> if (sc->quirks & SIXAXIS_CONTROLLER_USB) {
> - hdev->hid_output_raw_report = sixaxis_usb_output_raw_report;
> + /*
> + * The Sony Sixaxis does not handle HID Output Reports on the
> + * Interrupt EP like it could, so we need to force HID Output
> + * Reports to use HID_REQ_SET_REPORT on the Control EP.
> + *
> + * There is also another issue about HID Output Reports via USB,
> + * the Sixaxis does not want the report_id as part of the data
> + * packet, so we have to discard buf[0] when sending the actual
> + * control message, even for numbered reports, humpf!
> + */
> + hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
> + hdev->quirks |= HID_QUIRK_SKIP_OUTPUT_REPORT_ID;
> ret = sixaxis_set_operational_usb(hdev);
> sc->worker_initialized = 1;
> INIT_WORK(&sc->state_worker, sixaxis_state_worker);
> diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
> index 2cc484c..ffa648c 100644
> --- a/drivers/hid/hidraw.c
> +++ b/drivers/hid/hidraw.c
> @@ -149,7 +149,8 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer,
> goto out_free;
> }
>
> - if (report_type == HID_OUTPUT_REPORT) {
> + if ((report_type == HID_OUTPUT_REPORT) &&
> + !(dev->quirks & HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP)) {
> ret = hid_hw_output_report(dev, buf, count);
> /*
> * compatibility with old implementation of USB-HID and I2C-HID:
> diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
> index 0d1d875..3bc7cad 100644
> --- a/drivers/hid/usbhid/hid-core.c
> +++ b/drivers/hid/usbhid/hid-core.c
> @@ -894,7 +894,12 @@ static int usbhid_set_raw_report(struct hid_device *hid, unsigned int reportnum,
> int ret, skipped_report_id = 0;
>
> /* Byte 0 is the report number. Report data starts at byte 1.*/
> - buf[0] = reportnum;
> + if ((rtype == HID_OUTPUT_REPORT) &&
> + (hid->quirks & HID_QUIRK_SKIP_OUTPUT_REPORT_ID))
> + buf[0] = 0;
> + else
> + buf[0] = reportnum;
> +
> if (buf[0] == 0x0) {
> /* Don't send the Report ID */
> buf++;
> diff --git a/include/linux/hid.h b/include/linux/hid.h
> index e224516..2cd7174 100644
> --- a/include/linux/hid.h
> +++ b/include/linux/hid.h
> @@ -290,6 +290,8 @@ struct hid_item {
> #define HID_QUIRK_NO_EMPTY_INPUT 0x00000100
> #define HID_QUIRK_NO_INIT_INPUT_REPORTS 0x00000200
> #define HID_QUIRK_SKIP_OUTPUT_REPORTS 0x00010000
> +#define HID_QUIRK_SKIP_OUTPUT_REPORT_ID 0x00020000
> +#define HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP 0x00040000
> #define HID_QUIRK_FULLSPEED_INTERVAL 0x10000000
> #define HID_QUIRK_NO_INIT_REPORTS 0x20000000
> #define HID_QUIRK_NO_IGNORE 0x40000000
> --
> 1.8.5.3
>
--
Antonio Ospite
http://ao2.it
A: Because it messes up the order in which people normally read text.
See http://en.wikipedia.org/wiki/Posting_style
Q: Why is top-posting such a bad thing?
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
