[PATCH v3 1/4] HID: cp2112: remove various hid_out_raw_report calls

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



hid_out_raw_report is going to be obsoleted as it is not part of the
unified HID low level transport documentation
(Documentation/hid/hid-transport.txt)

  hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT);
is strictly equivalent to:
  hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf),
		HID_FEATURE_REPORT, HID_REQ_SET_REPORT);

Then replace buf[0] by the appropriate define.

So use the new api.

Reviewed-by: David Herrmann <dh.herrmann@xxxxxxxxx>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
---

changes in v2:
- replaces buf[0] by the appropriate report number.

 drivers/hid/hid-cp2112.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c
index 1025982..3913eb9 100644
--- a/drivers/hid/hid-cp2112.c
+++ b/drivers/hid/hid-cp2112.c
@@ -185,8 +185,8 @@ static int cp2112_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 	buf[1] &= ~(1 << offset);
 	buf[2] = gpio_push_pull;
 
-	ret = hdev->hid_output_raw_report(hdev, buf, sizeof(buf),
-					  HID_FEATURE_REPORT);
+	ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf, sizeof(buf),
+				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 	if (ret < 0) {
 		hid_err(hdev, "error setting GPIO config: %d\n", ret);
 		return ret;
@@ -207,8 +207,8 @@ static void cp2112_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	buf[1] = value ? 0xff : 0;
 	buf[2] = 1 << offset;
 
-	ret = hdev->hid_output_raw_report(hdev, buf, sizeof(buf),
-					  HID_FEATURE_REPORT);
+	ret = hid_hw_raw_request(hdev, CP2112_GPIO_SET, buf, sizeof(buf),
+				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 	if (ret < 0)
 		hid_err(hdev, "error setting GPIO values: %d\n", ret);
 }
@@ -253,8 +253,8 @@ static int cp2112_gpio_direction_output(struct gpio_chip *chip,
 	buf[1] |= 1 << offset;
 	buf[2] = gpio_push_pull;
 
-	ret = hdev->hid_output_raw_report(hdev, buf, sizeof(buf),
-					  HID_FEATURE_REPORT);
+	ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf, sizeof(buf),
+				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 	if (ret < 0) {
 		hid_err(hdev, "error setting GPIO config: %d\n", ret);
 		return ret;
-- 
1.8.5.3

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux