Hi
On Sun, Feb 2, 2014 at 5:50 AM, Benjamin Tissoires
<benjamin.tissoires@xxxxxxxxxx> wrote:
> hid-logitech-dj uses its own ->hidinput_input_event() instead of
> the generic binding in hid-input.
> Moving the handling of LEDs towards logi_dj_output_hidraw_report()
> allows two things:
> - remove hidinput_input_event in struct hid_device
> - hidraw user space programs can also set the LEDs
>
> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
> ---
> drivers/hid/hid-logitech-dj.c | 99 +++++++++++++++----------------------------
> 1 file changed, 35 insertions(+), 64 deletions(-)
>
> diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
> index f45279c..61d2bbf 100644
> --- a/drivers/hid/hid-logitech-dj.c
> +++ b/drivers/hid/hid-logitech-dj.c
> @@ -44,14 +44,6 @@ static const char kbd_descriptor[] = {
> 0x19, 0xE0, /* USAGE_MINIMUM (Left Control) */
> 0x29, 0xE7, /* USAGE_MAXIMUM (Right GUI) */
> 0x81, 0x02, /* INPUT (Data,Var,Abs) */
> - 0x95, 0x05, /* REPORT COUNT (5) */
> - 0x05, 0x08, /* USAGE PAGE (LED page) */
> - 0x19, 0x01, /* USAGE MINIMUM (1) */
> - 0x29, 0x05, /* USAGE MAXIMUM (5) */
> - 0x91, 0x02, /* OUTPUT (Data, Variable, Absolute) */
> - 0x95, 0x01, /* REPORT COUNT (1) */
> - 0x75, 0x03, /* REPORT SIZE (3) */
> - 0x91, 0x01, /* OUTPUT (Constant) */
> 0x95, 0x06, /* REPORT_COUNT (6) */
> 0x75, 0x08, /* REPORT_SIZE (8) */
> 0x15, 0x00, /* LOGICAL_MINIMUM (0) */
> @@ -60,6 +52,18 @@ static const char kbd_descriptor[] = {
> 0x19, 0x00, /* USAGE_MINIMUM (no event) */
> 0x2A, 0xFF, 0x00, /* USAGE_MAXIMUM (reserved) */
> 0x81, 0x00, /* INPUT (Data,Ary,Abs) */
> + 0x85, 0x0e, /* REPORT_ID (14) */
> + 0x05, 0x08, /* USAGE PAGE (LED page) */
> + 0x95, 0x05, /* REPORT COUNT (5) */
> + 0x75, 0x01, /* REPORT SIZE (1) */
> + 0x15, 0x00, /* LOGICAL_MINIMUM (0) */
> + 0x25, 0x01, /* LOGICAL_MAXIMUM (1) */
> + 0x19, 0x01, /* USAGE MINIMUM (1) */
> + 0x29, 0x05, /* USAGE MAXIMUM (5) */
> + 0x91, 0x02, /* OUTPUT (Data, Variable, Absolute) */
> + 0x95, 0x01, /* REPORT COUNT (1) */
> + 0x75, 0x03, /* REPORT SIZE (3) */
> + 0x91, 0x01, /* OUTPUT (Constant) */
> 0xC0
> };
>
> @@ -544,10 +548,30 @@ static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf,
> size_t count,
> unsigned char report_type)
> {
> - /* Called by hid raw to send data */
> - dbg_hid("%s\n", __func__);
> + struct dj_device *djdev = hid->driver_data;
> + struct dj_receiver_dev *djrcv_dev = djdev->dj_receiver_dev;
> + u8 *out_buf;
> + int ret;
>
> - return 0;
> + if (buf[0] != REPORT_TYPE_LEDS)
> + return -EINVAL;
> +
> + out_buf = kzalloc(DJREPORT_SHORT_LENGTH, GFP_ATOMIC);
> + if (!out_buf)
> + return -ENOMEM;
> +
> + if (count < DJREPORT_SHORT_LENGTH - 2)
> + count = DJREPORT_SHORT_LENGTH - 2;
> +
> + out_buf[0] = REPORT_ID_DJ_SHORT;
> + out_buf[1] = djdev->device_index;
> + memcpy(out_buf + 2, buf, count);
> +
> + ret = djrcv_dev->hdev->hid_output_raw_report(djrcv_dev->hdev, out_buf,
> + DJREPORT_SHORT_LENGTH, report_type);
Strictly speaking the code below uses HID_REQ_SET_REPORT and you
replace it with hid_output_raw_report() here (which at least for BTHID
is not equivalent). Anyhow, HID-core uses hid_output_raw_report(),
too, so this should be fine.
Thanks
David
> +
> + kfree(out_buf);
> + return ret;
> }
>
> static void rdcat(char *rdesc, unsigned int *rsize, const char *data, unsigned int size)
> @@ -613,58 +637,6 @@ static int logi_dj_ll_parse(struct hid_device *hid)
> return retval;
> }
>
> -static int logi_dj_ll_input_event(struct input_dev *dev, unsigned int type,
> - unsigned int code, int value)
> -{
> - /* Sent by the input layer to handle leds and Force Feedback */
> - struct hid_device *dj_hiddev = input_get_drvdata(dev);
> - struct dj_device *dj_dev = dj_hiddev->driver_data;
> -
> - struct dj_receiver_dev *djrcv_dev =
> - dev_get_drvdata(dj_hiddev->dev.parent);
> - struct hid_device *dj_rcv_hiddev = djrcv_dev->hdev;
> - struct hid_report_enum *output_report_enum;
> -
> - struct hid_field *field;
> - struct hid_report *report;
> - unsigned char *data;
> - int offset;
> -
> - dbg_hid("%s: %s, type:%d | code:%d | value:%d\n",
> - __func__, dev->phys, type, code, value);
> -
> - if (type != EV_LED)
> - return -1;
> -
> - offset = hidinput_find_field(dj_hiddev, type, code, &field);
> -
> - if (offset == -1) {
> - dev_warn(&dev->dev, "event field not found\n");
> - return -1;
> - }
> - hid_set_field(field, offset, value);
> -
> - data = hid_alloc_report_buf(field->report, GFP_ATOMIC);
> - if (!data) {
> - dev_warn(&dev->dev, "failed to allocate report buf memory\n");
> - return -1;
> - }
> -
> - hid_output_report(field->report, &data[0]);
> -
> - output_report_enum = &dj_rcv_hiddev->report_enum[HID_OUTPUT_REPORT];
> - report = output_report_enum->report_id_hash[REPORT_ID_DJ_SHORT];
> - hid_set_field(report->field[0], 0, dj_dev->device_index);
> - hid_set_field(report->field[0], 1, REPORT_TYPE_LEDS);
> - hid_set_field(report->field[0], 2, data[1]);
> -
> - hid_hw_request(dj_rcv_hiddev, report, HID_REQ_SET_REPORT);
> -
> - kfree(data);
> -
> - return 0;
> -}
> -
> static int logi_dj_ll_start(struct hid_device *hid)
> {
> dbg_hid("%s\n", __func__);
> @@ -683,7 +655,6 @@ static struct hid_ll_driver logi_dj_ll_driver = {
> .stop = logi_dj_ll_stop,
> .open = logi_dj_ll_open,
> .close = logi_dj_ll_close,
> - .hidinput_input_event = logi_dj_ll_input_event,
> };
>
>
> --
> 1.8.3.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
