When connected via Bluetooth the Dualshock 4 wants rumble and LED data sent in
report 17, which is 77 bytes.
The format of the rumble and LED data is identical to running over USB, but the
starting offset is at 6 bytes instead of 4.
Signed-off-by: Frank Praznik <frank.praznik@xxxxxxxxx>
---
drivers/hid/hid-sony.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 8e82073f..b35535e 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -1268,11 +1268,18 @@ static void dualshock4_state_worker(struct work_struct *work)
struct hid_device *hdev = sc->hdev;
int offset;
- __u8 buf[32] = { 0 };
+ __u8 buf[78] = { 0 };
- buf[0] = 0x05;
- buf[1] = 0x03;
- offset = 4;
+ if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) {
+ buf[0] = 0x05;
+ buf[1] = 0x03;
+ offset = 4;
+ } else {
+ buf[0] = 0x11;
+ buf[1] = 0xB0;
+ buf[3] = 0x0F;
+ offset = 6;
+ }
#ifdef CONFIG_SONY_FF
buf[offset++] = sc->right;
@@ -1285,7 +1292,11 @@ static void dualshock4_state_worker(struct work_struct *work)
buf[offset++] = sc->led_state[1];
buf[offset++] = sc->led_state[2];
- hdev->ll_driver->output_report(hdev, buf, sizeof(buf));
+ if (sc->quirks & DUALSHOCK4_CONTROLLER_USB)
+ hdev->ll_driver->output_report(hdev, buf, 32);
+ else
+ hdev->ll_driver->raw_request(hdev, 0x11, buf, 78,
+ HID_OUTPUT_REPORT, HID_REQ_SET_REPORT);
}
#ifdef CONFIG_SONY_FF
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
