Re: [PATCH v2 2/5] input: sun4i-ts: Add support for temperature sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Hans,

On Fri, Dec 27, 2013 at 03:59:56PM +0100, Hans de Goede wrote:
> +
> +	if (!ts->input)
> +		goto leave;
> +
>  	if (reg_val & FIFO_DATA_PENDING) {
>  		x = readl(ts->base + TP_DATA);
>  		y = readl(ts->base + TP_DATA);
> @@ -140,6 +151,7 @@ static irqreturn_t sun4i_ts_irq(int irq, void *dev_id)
>  		input_sync(ts->input);
>  	}
>  
> +leave:

Can we please not introduce gotos where they are not needed? If you
concerned about extra indent just split touchscreen handling into a
separate function and then do

	if (ts->input)
		sun4i_ts_handle_touchscreen_data(...);


>  	writel(reg_val, ts->base + TP_INT_FIFOS);
>  
>  	return IRQ_HANDLED;
> @@ -149,9 +161,9 @@ static int sun4i_ts_open(struct input_dev *dev)
>  {
>  	struct sun4i_ts_data *ts = input_get_drvdata(dev);
>  
> -	/* Flush, set trig level to 1, enable data and up irqs */
> -	writel(DATA_IRQ_EN(1) | FIFO_TRIG(1) |FIFO_FLUSH(1) | TP_UP_IRQ_EN(1),
> -	       ts->base + TP_INT_FIFOC);
> +	/* Flush, set trig level to 1, enable temp, data and up irqs */
> +	writel(TEMP_IRQ_EN(1) | DATA_IRQ_EN(1) | FIFO_TRIG(1) | FIFO_FLUSH(1) |
> +		TP_UP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
>  
>  	return 0;
>  }
> @@ -160,40 +172,76 @@ static void sun4i_ts_close(struct input_dev *dev)
>  {
>  	struct sun4i_ts_data *ts = input_get_drvdata(dev);
>  
> -	/* Deactivate all IRQs */
> -	writel(0, ts->base + TP_INT_FIFOC);
> +	/* Deactivate all input IRQs */
> +	writel(TEMP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
>  	synchronize_irq(ts->irq);

Hmm, it would be nice we touchscreen methods only affected touchscreen
functionality. Can you read current state and adjust it as needed
instead of clobbering it? Then you could do away with remove() method
altogether.

>  }
>  
> +static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
> +			 char *buf)
> +{
> +	struct sun4i_ts_data *ts = dev_get_drvdata(dev);
> +
> +	/* No temp_data until the first irq */
> +	if (ts->temp_data == -1)
> +		return -EAGAIN;
> +
> +	return sprintf(buf, "%d\n", (ts->temp_data - 1447) * 100);
> +}
> +
> +static ssize_t show_temp_label(struct device *dev,
> +			      struct device_attribute *devattr, char *buf)
> +{
> +	return sprintf(buf, "SoC temperature\n");
> +}
> +
> +static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
> +static DEVICE_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL);
> +
> +static struct attribute *sun4i_ts_attrs[] = {
> +	&dev_attr_temp1_input.attr,
> +	&dev_attr_temp1_label.attr,
> +	NULL
> +};
> +ATTRIBUTE_GROUPS(sun4i_ts);
> +
>  static int sun4i_ts_probe(struct platform_device *pdev)
>  {
>  	struct sun4i_ts_data *ts;
>  	struct device *dev = &pdev->dev;
> +	struct device_node *np =dev->of_node;
> +	struct device *hwmon;
>  	int ret;
> +	bool ts_attached;
> +
> +	ts_attached = of_property_read_bool(np, "ts-attached");
>  
>  	ts = devm_kzalloc(dev, sizeof(struct sun4i_ts_data), GFP_KERNEL);
>  	if (!ts)
>  		return -ENOMEM;
>  
>  	ts->dev = dev;
> -
> -	ts->input = devm_input_allocate_device(dev);
> -	if (!ts->input)
> -		return -ENOMEM;
> -
> -	ts->input->name = pdev->name;
> -	ts->input->phys = "sun4i_ts/input0";
> -	ts->input->open = sun4i_ts_open;
> -	ts->input->close = sun4i_ts_close;
> -	ts->input->id.bustype = BUS_HOST;
> -	ts->input->id.vendor = 0x0001;
> -	ts->input->id.product = 0x0001;
> -	ts->input->id.version = 0x0100;
> -	ts->input->evbit[0] =  BIT(EV_SYN) | BIT(EV_KEY) | BIT(EV_ABS);
> -	set_bit(BTN_TOUCH, ts->input->keybit);
> -	input_set_abs_params(ts->input, ABS_X, 0, 4095, 0, 0);
> -	input_set_abs_params(ts->input, ABS_Y, 0, 4095, 0, 0);
> -	input_set_drvdata(ts->input, ts);
> +	ts->temp_data = -1;
> +
> +	if (ts_attached) {
> +		ts->input = devm_input_allocate_device(dev);
> +		if (!ts->input)
> +			return -ENOMEM;
> +
> +		ts->input->name = pdev->name;
> +		ts->input->phys = "sun4i_ts/input0";
> +		ts->input->open = sun4i_ts_open;
> +		ts->input->close = sun4i_ts_close;
> +		ts->input->id.bustype = BUS_HOST;
> +		ts->input->id.vendor = 0x0001;
> +		ts->input->id.product = 0x0001;
> +		ts->input->id.version = 0x0100;
> +		ts->input->evbit[0] =  BIT(EV_SYN) | BIT(EV_KEY) | BIT(EV_ABS);
> +		set_bit(BTN_TOUCH, ts->input->keybit);
> +		input_set_abs_params(ts->input, ABS_X, 0, 4095, 0, 0);
> +		input_set_abs_params(ts->input, ABS_Y, 0, 4095, 0, 0);
> +		input_set_drvdata(ts->input, ts);
> +	}
>  
>  	ts->base = devm_ioremap_resource(dev,
>  			      platform_get_resource(pdev, IORESOURCE_MEM, 0));
> @@ -232,14 +280,42 @@ static int sun4i_ts_probe(struct platform_device *pdev)
>  	writel(STYLUS_UP_DEBOUN(5) | STYLUS_UP_DEBOUN_EN(1) | TP_MODE_EN(1),
>  	       ts->base + TP_CTRL1);
>  
> -	ret = input_register_device(ts->input);
> -	if (ret)
> -		return ret;
> +	hwmon = devm_hwmon_device_register_with_groups(ts->dev, "sun4i_ts",
> +						       ts, sun4i_ts_groups);
> +	if (IS_ERR(hwmon)) {
> +		return PTR_ERR(hwmon);
> +	}
> +
> +	writel(TEMP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
> +
> +	if (ts_attached) {
> +		ret = input_register_device(ts->input);
> +		if (ret) {
> +			writel(0, ts->base + TP_INT_FIFOC);
> +			synchronize_irq(ts->irq);

Given that we now can't avoid freeing irq before freeing ts memory or
input device I think you can do away with synchronize_irq() here and
elsewhere as freeing irq is guaranteed to wait for current interrupt to
complete.

> +			return ret;
> +		}
> +	}
>  
>  	platform_set_drvdata(pdev, ts);
>  	return 0;
>  }
>  
> +static int sun4i_ts_remove(struct platform_device *pdev)
> +{
> +	struct sun4i_ts_data *ts = platform_get_drvdata(pdev);
> +
> +	/* Explicit unregister to avoid open/close changing the imask later */
> +	if (ts->input)
> +		input_unregister_device(ts->input);
> +
> +	/* Deactivate all IRQs */
> +	writel(0, ts->base + TP_INT_FIFOC);
> +	synchronize_irq(ts->irq);
> +
> +	return 0;
> +}
> +
>  static const struct of_device_id sun4i_ts_of_match[] = {
>  	{ .compatible = "allwinner,sun4i-ts", },
>  	{ /* sentinel */ }
> @@ -253,6 +329,7 @@ static struct platform_driver sun4i_ts_driver = {
>  		.of_match_table = of_match_ptr(sun4i_ts_of_match),
>  	},
>  	.probe	= sun4i_ts_probe,
> +	.remove	= sun4i_ts_remove,
>  };
>  
>  module_platform_driver(sun4i_ts_driver);
> -- 
> 1.8.4.2
> 

Thanks.

-- 
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux