Hi Roger,
On Wed, Dec 18, 2013 at 02:51:12PM +0530, Roger Quadros wrote:
> Provide device tree support and binding information.
> Change platform data parameters from x/y_max to x/y_size..
I'd rather keep them as they were.
>
> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
> Acked-by: Mugunthan V N <mugunthanvnm@xxxxxx>
> ---
> .../bindings/input/touchscreen/pixcir_i2c_ts.txt | 26 ++++++++
> drivers/input/touchscreen/pixcir_i2c_ts.c | 77 ++++++++++++++++++++--
> include/linux/input/pixcir_ts.h | 5 +-
> 3 files changed, 101 insertions(+), 7 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
> new file mode 100644
> index 0000000..c0b0b270
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
> @@ -0,0 +1,26 @@
> +* Pixcir I2C touchscreen controllers
> +
> +Required properties:
> +- compatible: must be "pixcir,pixcir_ts"
> +- reg: I2C address of the chip
> +- interrupts: interrupt to which the chip is connected
> +- attb-gpio: GPIO connected to the ATTB line of the chip
> +- x-size: horizontal resolution of touchscreen
> +- y-size: vertical resolution of touchscreen
> +
> +Example:
> +
> + i2c@00000000 {
> + /* ... */
> +
> + pixcir_ts@5c {
> + compatible = "pixcir,pixcir_ts";
> + reg = <0x5c>;
> + interrupts = <2 0>;
> + attb-gpio = <&gpf 2 0 2>;
> + x-size = <800>;
> + y-size = <600>;
> + };
> +
> + /* ... */
> + };
> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
> index 6cc6b36..3a447c9 100644
> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c
> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
> @@ -24,6 +24,10 @@
> #include <linux/i2c.h>
> #include <linux/input.h>
> #include <linux/input/pixcir_ts.h>
> +#include <linux/gpio.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
> +#include <linux/of_device.h>
>
> struct pixcir_i2c_ts_data {
> struct i2c_client *client;
> @@ -125,15 +129,65 @@ static int pixcir_i2c_ts_resume(struct device *dev)
> static SIMPLE_DEV_PM_OPS(pixcir_dev_pm_ops,
> pixcir_i2c_ts_suspend, pixcir_i2c_ts_resume);
>
> +#if defined(CONFIG_OF)
#ifdef is preferred for simple conditions.
> +static const struct of_device_id pixcir_of_match[];
> +
> +static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
> +{
> + struct pixcir_ts_platform_data *pdata;
> + struct device_node *np = dev->of_node;
> + const struct of_device_id *match;
> +
> + match = of_match_device(of_match_ptr(pixcir_of_match), dev);
> + if (!match)
> + return ERR_PTR(-EINVAL);
Why do you need an explicit match here?
> +
> + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + return ERR_PTR(-ENOMEM);
> +
> + pdata->gpio_attb = of_get_named_gpio(np, "attb-gpio", 0);
> + if (!gpio_is_valid(pdata->gpio_attb))
> + dev_err(dev, "Failed to get ATTB GPIO\n");
> +
> + if (of_property_read_u32(np, "x-size", &pdata->x_size)) {
> + dev_err(dev, "Failed to get x-size property\n");
> + return ERR_PTR(-EINVAL);
> + }
> +
> + if (of_property_read_u32(np, "y-size", &pdata->y_size)) {
> + dev_err(dev, "Failed to get y-size property\n");
> + return ERR_PTR(-EINVAL);
> + }
> +
> + dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
> + pdata->x_size, pdata->y_size, pdata->gpio_attb);
> +
> + return pdata;
> +}
> +#else
> +static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
> +{
> + return NULL;
This should be
return ERR_PTR(-EINVAL);
since you test it with IS_ERR() later.
> +}
> +#endif
> +
> static int pixcir_i2c_ts_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> const struct pixcir_ts_platform_data *pdata = client->dev.platform_data;
> + struct device *dev = &client->dev;
> + struct device_node *np = dev->of_node;
> struct pixcir_i2c_ts_data *tsdata;
> struct input_dev *input;
> int error;
>
> - if (!pdata) {
> + if (np) {
> + pdata = pixcir_parse_dt(dev);
> + if (IS_ERR(pdata))
> + return PTR_ERR(pdata);
We should be favoring kernel-provided platform data if it is pesent even
if there is dt-data available. This way user can override firmware,m if
needed.
> +
> + } else if (!pdata) {
> dev_err(&client->dev, "platform data not defined\n");
> return -EINVAL;
> }
> @@ -157,10 +211,14 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
> __set_bit(EV_KEY, input->evbit);
> __set_bit(EV_ABS, input->evbit);
> __set_bit(BTN_TOUCH, input->keybit);
> - input_set_abs_params(input, ABS_X, 0, pdata->x_max, 0, 0);
> - input_set_abs_params(input, ABS_Y, 0, pdata->y_max, 0, 0);
> - input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0);
> - input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0);
> + input_set_abs_params(input, ABS_X,
> + 0, pdata->x_size - 1, 0, 0);
> + input_set_abs_params(input, ABS_Y,
> + 0, pdata->y_size - 1, 0, 0);
> + input_set_abs_params(input, ABS_MT_POSITION_X,
> + 0, pdata->x_size - 1, 0, 0);
> + input_set_abs_params(input, ABS_MT_POSITION_Y,
> + 0, pdata->y_size - 1, 0, 0);
>
> input_set_drvdata(input, tsdata);
>
> @@ -211,11 +269,20 @@ static const struct i2c_device_id pixcir_i2c_ts_id[] = {
> };
> MODULE_DEVICE_TABLE(i2c, pixcir_i2c_ts_id);
>
> +#if defined(CONFIG_OF)
> +static const struct of_device_id pixcir_of_match[] = {
> + { .compatible = "pixcir,pixcir_ts", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, pixcir_of_match);
> +#endif
#ifdef is preferred for simple conditions.
> +
> static struct i2c_driver pixcir_i2c_ts_driver = {
> .driver = {
> .owner = THIS_MODULE,
> .name = "pixcir_ts",
> .pm = &pixcir_dev_pm_ops,
> + .of_match_table = of_match_ptr(pixcir_of_match),
> },
> .probe = pixcir_i2c_ts_probe,
> .remove = pixcir_i2c_ts_remove,
> diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h
> index 7163d91..b34ff7e 100644
> --- a/include/linux/input/pixcir_ts.h
> +++ b/include/linux/input/pixcir_ts.h
> @@ -3,8 +3,9 @@
>
> struct pixcir_ts_platform_data {
> int (*attb_read_val)(void);
> - int x_max;
> - int y_max;
> + unsigned int x_size; /* X axis resolution */
> + unsigned int y_size; /* Y axis resolution */
> + int gpio_attb; /* GPIO connected to ATTB line */
> };
OK, it looks like the series were split awkwardly: you are defining data
that is used by follow-up patches and its purpose is unclear when
reviewing patch-by-patch. I'd recommend rearranging so that DT support
patch is the very last in the series.
>
> #endif
> --
> 1.8.3.2
>
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
