Hello everyone,
I hope I'm at the right address here with my problems. If not, please do
point me in the correct direction.
I have a Lenovo Thinkpad T440s with a Synaptics clickpad and an IBM
trackpoint in it:
input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input120
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00, board id: 2668, fw id: 1293989
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input123
psmouse serio34: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
psmouse serio34: trackpoint: IBM TrackPoint firmware: 0x0e,
buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio34/input/input124
The problem is that the trackpoint behaves incredibly erratic, sometimes
working correctly for minutes at a time, sometimes just jumping around and
many times just hanging. I need to remove and re-insert the psmouse module
to solve that. Alongside this behaviour, my kernel log also is getting
spammed with messages like:
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
and
psmouse serio1: bad data from KBC - timeout
What I've tried:
- Tried the kernel options i8042.nomux=1 and i8042.reset=1
- Disable acpi by passing acpi=off to the kernel
- Disabled CPU frequency scaling
- Trying other protocols, e.g. by doing modprobe psmouse proto=imps or
proto=bare
- Switching from vanilla 3.12 kernel to both the latest&greatest kernel
from Linus' Git and an antique 3.1.0 kernel
- Turning on i8042.debug. To my untrained eye, it looks like bytes of PS/2
data are just disappearing when the 'lost sync' messages kick in. I can
give an example of that if needed.
Strangely, the symptoms have been getting worse in the 10 days I've had
this machine: from the first few days with no trouble to today with the
mouse crapping out almost once every ten seconds or so. I would say it's a
DOA and claim my warranty, if not frustratingly the machine works
perfectly fine in Windows 8, with no touchpad trouble at all.
I'm willing to try things on this machine, run patches or take any hint in
what I can change to get this working; if it helps I can even poke an
oscilloscope at the PS2 lines. Not having a working touchpad or
touchpoint is getting a bit frustrating...
Cheers,
Jeroen
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
