> Sony Dualshock 3 controllers have two motors which can be used to provide
> simple force feedback rumble effects. The right motor is can be used to
> create
> a weak rumble effect but does not allow to set the force. The left motor
> is
> used to create a strong rumble effect with adjustable intensity.
Hi,
This patch appears to work OK with my DualShock/SixAxis controller (USB
connection), but causes a machine lockup when used with my Intec wired
controller.
The Intec controller works OK up to the point when I start rumble,
sometimes the motor runs some times it doesn't. I am using SDL2's
'testhaptic' application.
Syslog log attached detail controller.
If you have any specific tests to run, please advise,
Simon
Nov 16 14:26:21 womble kernel: [ 95.296039] usb 3-1: new full-speed USB device number 2 using uhci_hcd
Nov 16 14:26:22 womble kernel: [ 95.463964] usb 3-1: New USB device found, idVendor=054c, idProduct=0268
Nov 16 14:26:22 womble kernel: [ 95.463973] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 16 14:26:22 womble kernel: [ 95.463978] usb 3-1: Product: PLAYSTATION(R)3 Controller
Nov 16 14:26:22 womble kernel: [ 95.463982] usb 3-1: Manufacturer: GASIA CORP.
Nov 16 14:26:22 womble mtp-probe: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1"
Nov 16 14:26:22 womble mtp-probe: bus: 3, device: 2 was not an MTP device
Nov 16 14:26:22 womble kernel: [ 95.770400] usbcore: registered new interface driver usbhid
Nov 16 14:26:22 womble kernel: [ 95.770408] usbhid: USB HID core driver
Nov 16 14:26:22 womble kernel: [ 95.838174] sony 0003:054C:0268.0001: Fixing up Sony Sixaxis report descriptor
Nov 16 14:26:22 womble kernel: [ 95.848763] input: GASIA CORP. PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input7
Nov 16 14:26:22 womble kernel: [ 95.849784] sony 0003:054C:0268.0001: input,hiddev0,hidraw0: USB HID v1.11 Joystick [GASIA CORP. PLAYSTATION(R)3 Controller] on usb-0000:00:1d.1-1/input0
