Hello, On 10/24/2013 10:38 AM, Sebastian Reichel wrote: > Hi Florian, > > On Thu, Oct 24, 2013 at 09:47:33AM +0200, Florian Vaussard wrote: >>> +Required SoC Specific Properties: >>> +- compatible: should be one of the following >>> + - "ti,twl4030-pwrbutton": For controllers compatible with twl4030 >>> +- interrupt: should be one of the following >>> + - <8>: For controllers compatible with twl4030 >> >> This is <8> for your particular case, but it will depend on your >> SoC, won't it? Moreover, this property will be most likely >> inherited from the root twl node, so I do not see the need to >> document it here. See: >> >> Documentation/devicetree/bindings/mfd/twl-familly.txt > > No. This is an internal twl4030 interrupt. TWL4030 functions > itself as an interrupt controller. > So if it does not belong to the TWL parent, where is it used in your code? You should be parsing this property, so you can set up the IRQ properly. I am a bit confused here. If it is fixed, no need for a OF property. >>> + >>> +Example: >>> + twl_pwrbutton: pwrbutton { >>> + compatible = "ti,twl4030-pwrbutton"; >>> + interrupts = <8>; >>> + }; >> >> You are missing the root twl node here, no? > > So should I document it like this? > IMHO it is more clear for the user. > twl4030 { > compatible = "ti,twl4030"; > > pwrbutton { > compatible = "ti,twl4030-pwrbutton"; > interrupts = <8>; > }; > }; Nit, but existing documentations follow the "name@address" form for the root node, as the TWL is on an I2C bus. Either it is already defined, thus you should use "&twl4030" to reference it, or you create the TWL node and something like "twl4030@48" should be used. For an example, you can refer to existing bindings, like Documentation/devicetree/bindings/mfd/twl4030-audio.txt. Best regards, Florian -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html