Previously the driver had only one-shot reading functionality.
This patch adds triggered buffer support to the driver.
A buffer of samples can now be read via /dev/iio.
Any IIO trigger can be used to start acquisition.
Patil Rachna (TI) laid the ground work for ADC HW register access.
Russ Dill (TI) fixed bugs in the driver relevant to FIFOs and IRQs.
I fixed channel scanning so multiple ADC channels can be read
simultaneously and pushed to userspace. Restructured the driver
to fit IIO ABI. And added trigger support.
Signed-off-by: Zubair Lutfullah <zubair.lutfullah@xxxxxxxxx>
Acked-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Russ Dill <Russ.Dill@xxxxxx>
---
drivers/iio/adc/ti_am335x_adc.c | 353 ++++++++++++++++++++++++++++------
include/linux/mfd/ti_am335x_tscadc.h | 13 +-
2 files changed, 303 insertions(+), 63 deletions(-)
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 3ceac3e..0d7e313 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -24,16 +24,28 @@
#include <linux/iio/iio.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/iio/machine.h>
#include <linux/iio/driver.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
#include <linux/mfd/ti_am335x_tscadc.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
struct tiadc_device {
struct ti_tscadc_dev *mfd_tscadc;
int channels;
u8 channel_line[8];
u8 channel_step[8];
+ struct work_struct poll_work;
+ wait_queue_head_t wq_data_avail;
+ bool data_avail;
+ u32 *inputbuffer;
+ int sample_count;
+ int irq;
+ int buffer_en_ch_steps;
};
static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
@@ -56,27 +68,28 @@ static u32 get_adc_step_mask(struct tiadc_device *adc_dev)
return step_en;
}
-static void tiadc_step_config(struct tiadc_device *adc_dev)
+static void tiadc_step_config(struct iio_dev *indio_dev)
{
+ struct tiadc_device *adc_dev = iio_priv(indio_dev);
unsigned int stepconfig;
- int i, steps;
+ int i, steps, chan;
/*
* There are 16 configurable steps and 8 analog input
* lines available which are shared between Touchscreen and ADC.
- *
* Steps backwards i.e. from 16 towards 0 are used by ADC
* depending on number of input lines needed.
* Channel would represent which analog input
* needs to be given to ADC to digitalize data.
*/
-
steps = TOTAL_STEPS - adc_dev->channels;
- stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1;
+ if (iio_buffer_enabled(indio_dev))
+ stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1
+ | STEPCONFIG_MODE_SWCNT;
+ else
+ stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1;
for (i = 0; i < adc_dev->channels; i++) {
- int chan;
-
chan = adc_dev->channel_line[i];
tiadc_writel(adc_dev, REG_STEPCONFIG(steps),
stepconfig | STEPCONFIG_INP(chan));
@@ -85,7 +98,203 @@ static void tiadc_step_config(struct tiadc_device *adc_dev)
adc_dev->channel_step[i] = steps;
steps++;
}
+}
+
+static irqreturn_t tiadc_irq(int irq, void *private)
+{
+ struct iio_dev *idev = private;
+ struct tiadc_device *adc_dev = iio_priv(idev);
+ unsigned int status, config;
+ status = tiadc_readl(adc_dev, REG_IRQSTATUS);
+
+ /* FIFO Overrun. Clear flag. Disable/Enable ADC to recover */
+ if (status & IRQENB_FIFO1OVRRUN) {
+ config = tiadc_readl(adc_dev, REG_CTRL);
+ config &= ~(CNTRLREG_TSCSSENB);
+ tiadc_writel(adc_dev, REG_CTRL, config);
+ tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1OVRRUN |
+ IRQENB_FIFO1UNDRFLW | IRQENB_FIFO1THRES);
+ tiadc_writel(adc_dev, REG_CTRL, (config | CNTRLREG_TSCSSENB));
+ } else if (status & IRQENB_FIFO1THRES) {
+ /* Wake adc_work that pushes FIFO data to iio buffer */
+ tiadc_writel(adc_dev, REG_IRQCLR, IRQENB_FIFO1THRES);
+ adc_dev->data_avail = 1;
+ wake_up_interruptible(&adc_dev->wq_data_avail);
+ } else
+ return IRQ_NONE;
+
+ status = tiadc_readl(adc_dev, REG_IRQSTATUS);
+ if (status == false)
+ return IRQ_HANDLED;
+ else
+ return IRQ_NONE;
+}
+
+static irqreturn_t tiadc_trigger_h(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct tiadc_device *adc_dev = iio_priv(indio_dev);
+ unsigned int config;
+
+ schedule_work(&adc_dev->poll_work);
+ am335x_tsc_se_set(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps);
+ if (adc_dev->mfd_tscadc->tsc_cell == -1) {
+ config = tiadc_readl(adc_dev, REG_CTRL);
+ tiadc_writel(adc_dev, REG_CTRL, config & ~CNTRLREG_TSCSSENB);
+ tiadc_writel(adc_dev, REG_CTRL, config | CNTRLREG_TSCSSENB);
+ }
+
+ tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES |
+ IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW);
+ tiadc_writel(adc_dev, REG_IRQENABLE, IRQENB_FIFO1THRES
+ | IRQENB_FIFO1OVRRUN);
+
+ iio_trigger_notify_done(indio_dev->trig);
+ return IRQ_HANDLED;
+}
+
+static int tiadc_buffer_preenable(struct iio_dev *indio_dev)
+{
+ return iio_sw_buffer_preenable(indio_dev);
+}
+
+static int tiadc_buffer_postenable(struct iio_dev *indio_dev)
+{
+ struct tiadc_device *adc_dev = iio_priv(indio_dev);
+ struct iio_buffer *buffer = indio_dev->buffer;
+ unsigned int enb = 0, stepnum;
+ u8 bit;
+
+ tiadc_step_config(indio_dev);
+ for_each_set_bit(bit, buffer->scan_mask,
+ adc_dev->channels) {
+ struct iio_chan_spec const *chan = indio_dev->channels + bit;
+ /*
+ * There are a total of 16 steps available
+ * that are shared between ADC and touchscreen.
+ * We start configuring from step 16 to 0 incase of
+ * ADC. Hence the relation between input channel
+ * and step for ADC would be as below.
+ */
+ stepnum = chan->channel + 9;
+ enb |= (1 << stepnum);
+ }
+ adc_dev->buffer_en_ch_steps = enb;
+
+ return iio_triggered_buffer_postenable(indio_dev);
+}
+
+static int tiadc_buffer_predisable(struct iio_dev *indio_dev)
+{
+ struct tiadc_device *adc_dev = iio_priv(indio_dev);
+ int fifo1count, i, read, config;
+
+ if (adc_dev->mfd_tscadc->tsc_cell == -1) {
+ config = tiadc_readl(adc_dev, REG_CTRL);
+ config &= ~(CNTRLREG_TSCSSENB);
+ tiadc_writel(adc_dev, REG_CTRL, config);
+ } else
+ tiadc_writel(adc_dev, REG_SE, STPENB_STEPENB_TC);
+
+ tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
+ IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW));
+
+ /* Flush FIFO of any leftover data */
+ fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
+ for (i = 0; i < fifo1count; i++)
+ read = tiadc_readl(adc_dev, REG_FIFO1);
+
+ return iio_triggered_buffer_predisable(indio_dev);
+}
+
+static int tiadc_buffer_postdisable(struct iio_dev *indio_dev)
+{
+ struct tiadc_device *adc_dev = iio_priv(indio_dev);
+ int config;
+
+ tiadc_step_config(indio_dev);
+ if (adc_dev->mfd_tscadc->tsc_cell == -1) {
+ config = tiadc_readl(adc_dev, REG_CTRL);
+ tiadc_writel(adc_dev, REG_CTRL, (config | CNTRLREG_TSCSSENB));
+ }
+
+ return 0;
+}
+
+static const struct iio_buffer_setup_ops tiadc_buffer_setup_ops = {
+ .preenable = &tiadc_buffer_preenable,
+ .postenable = &tiadc_buffer_postenable,
+ .predisable = &tiadc_buffer_predisable,
+ .postdisable = &tiadc_buffer_postdisable,
+};
+
+static void tiadc_adc_work(struct work_struct *work_s)
+{
+ struct tiadc_device *adc_dev =
+ container_of(work_s, struct tiadc_device, poll_work);
+ struct iio_dev *indio_dev = iio_priv_to_dev(adc_dev);
+ struct iio_buffer *buffer = indio_dev->buffer;
+ int i, j, k, fifo1count, read;
+ unsigned int config;
+ int size_to_acquire = buffer->access->get_length(buffer);
+ int sample_count = 0;
+ u32 *data;
+
+ adc_dev->data_avail = 0;
+ data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (data == NULL)
+ goto out;
+
+ while (sample_count < size_to_acquire) {
+ tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES);
+ tiadc_writel(adc_dev, REG_IRQENABLE, IRQENB_FIFO1THRES);
+
+ wait_event_interruptible(adc_dev->wq_data_avail,
+ (adc_dev->data_avail == 1));
+ adc_dev->data_avail = 0;
+
+ fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
+ if (fifo1count * sizeof(u32) <
+ buffer->access->get_bytes_per_datum(buffer))
+ continue;
+
+ sample_count = sample_count + fifo1count;
+ for (k = 0; k < fifo1count; k = k + i) {
+ for (i = 0, j = 0; i < (indio_dev->scan_bytes)/4; i++) {
+ read = tiadc_readl(adc_dev, REG_FIFO1);
+ data[i] = read & FIFOREAD_DATA_MASK;
+ }
+ iio_push_to_buffers(indio_dev, (u8 *) data);
+ }
+ }
+out:
+ tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
+ IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW));
+ am335x_tsc_se_clr(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps);
+ if (adc_dev->mfd_tscadc->tsc_cell == -1) {
+ config = tiadc_readl(adc_dev, REG_CTRL);
+ tiadc_writel(adc_dev, REG_CTRL, config & ~CNTRLREG_TSCSSENB);
+ }
+}
+
+irqreturn_t tiadc_iio_pollfunc(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct tiadc_device *adc_dev = iio_priv(indio_dev);
+ int i, fifo1count, read;
+
+ tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
+ IRQENB_FIFO1OVRRUN |
+ IRQENB_FIFO1UNDRFLW));
+
+ /* Flush FIFO before trigger */
+ fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
+ for (i = 0; i < fifo1count; i++)
+ read = tiadc_readl(adc_dev, REG_FIFO1);
+ return IRQ_WAKE_THREAD;
}
static const char * const chan_name_ain[] = {
@@ -120,13 +329,13 @@ static int tiadc_channel_init(struct iio_dev *indio_dev, int channels)
chan->channel = adc_dev->channel_line[i];
chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
chan->datasheet_name = chan_name_ain[chan->channel];
+ chan->scan_index = i;
chan->scan_type.sign = 'u';
chan->scan_type.realbits = 12;
chan->scan_type.storagebits = 32;
}
indio_dev->channels = chan_array;
-
return 0;
}
@@ -141,58 +350,51 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
{
struct tiadc_device *adc_dev = iio_priv(indio_dev);
int i, map_val;
- unsigned int fifo1count, read, stepid;
- u32 step = UINT_MAX;
- bool found = false;
- u32 step_en;
- unsigned long timeout = jiffies + usecs_to_jiffies
- (IDLE_TIMEOUT * adc_dev->channels);
- step_en = get_adc_step_mask(adc_dev);
- am335x_tsc_se_set(adc_dev->mfd_tscadc, step_en);
-
- /* Wait for ADC sequencer to complete sampling */
- while (tiadc_readl(adc_dev, REG_ADCFSM) & SEQ_STATUS) {
- if (time_after(jiffies, timeout))
- return -EAGAIN;
- }
- map_val = chan->channel + TOTAL_CHANNELS;
-
- /*
- * When the sub-system is first enabled,
- * the sequencer will always start with the
- * lowest step (1) and continue until step (16).
- * For ex: If we have enabled 4 ADC channels and
- * currently use only 1 out of them, the
- * sequencer still configures all the 4 steps,
- * leading to 3 unwanted data.
- * Hence we need to flush out this data.
- */
-
- for (i = 0; i < ARRAY_SIZE(adc_dev->channel_step); i++) {
- if (chan->channel == adc_dev->channel_line[i]) {
- step = adc_dev->channel_step[i];
- break;
- }
- }
- if (WARN_ON_ONCE(step == UINT_MAX))
- return -EINVAL;
-
- fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
- for (i = 0; i < fifo1count; i++) {
- read = tiadc_readl(adc_dev, REG_FIFO1);
- stepid = read & FIFOREAD_CHNLID_MASK;
- stepid = stepid >> 0x10;
+ unsigned int fifo1count, read, stepid, step_en;
- if (stepid == map_val) {
- read = read & FIFOREAD_DATA_MASK;
- found = true;
- *val = read;
+ if (iio_buffer_enabled(indio_dev))
+ return -EBUSY;
+ else {
+ unsigned long timeout = jiffies + usecs_to_jiffies
+ (IDLE_TIMEOUT * adc_dev->channels);
+ step_en = get_adc_step_mask(adc_dev);
+ am335x_tsc_se_set(adc_dev->mfd_tscadc, step_en);
+
+ /* Wait for ADC sequencer to complete sampling */
+ while (tiadc_readl(adc_dev, REG_ADCFSM) & SEQ_STATUS) {
+ if (time_after(jiffies, timeout))
+ return -EAGAIN;
+ }
+ map_val = chan->channel + TOTAL_CHANNELS;
+
+ /*
+ * When the sub-system is first enabled,
+ * the sequencer will always start with the
+ * lowest step (1) and continue until step (16).
+ * For ex: If we have enabled 4 ADC channels and
+ * currently use only 1 out of them, the
+ * sequencer still configures all the 4 steps,
+ * leading to 3 unwanted data.
+ * Hence we need to flush out this data.
+ */
+
+ *val = -1;
+ fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
+ for (i = 0; i < fifo1count; i++) {
+ read = tiadc_readl(adc_dev, REG_FIFO1);
+ stepid = read & FIFOREAD_CHNLID_MASK;
+ stepid = stepid >> 0x10;
+
+ if (stepid == map_val) {
+ read = read & FIFOREAD_DATA_MASK;
+ *val = read;
+ }
}
+ if (*val != -1)
+ return IIO_VAL_INT;
+ else
+ return -EAGAIN;
}
-
- if (found == false)
- return -EBUSY;
- return IIO_VAL_INT;
}
static const struct iio_info tiadc_info = {
@@ -231,26 +433,45 @@ static int tiadc_probe(struct platform_device *pdev)
channels++;
}
adc_dev->channels = channels;
+ adc_dev->irq = adc_dev->mfd_tscadc->irq;
indio_dev->dev.parent = &pdev->dev;
indio_dev->name = dev_name(&pdev->dev);
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &tiadc_info;
- tiadc_step_config(adc_dev);
+ tiadc_step_config(indio_dev);
+ tiadc_writel(adc_dev, REG_FIFO1THR, FIFO1_THRESHOLD);
err = tiadc_channel_init(indio_dev, adc_dev->channels);
if (err < 0)
goto err_free_device;
- err = iio_device_register(indio_dev);
+ INIT_WORK(&adc_dev->poll_work, &tiadc_adc_work);
+ init_waitqueue_head(&adc_dev->wq_data_avail);
+
+ err = request_irq(adc_dev->irq, tiadc_irq, IRQF_SHARED,
+ indio_dev->name, indio_dev);
if (err)
goto err_free_channels;
+ err = iio_triggered_buffer_setup(indio_dev, &tiadc_iio_pollfunc,
+ &tiadc_trigger_h, &tiadc_buffer_setup_ops);
+ if (err)
+ goto err_free_irq;
+
+ err = iio_device_register(indio_dev);
+ if (err)
+ goto err_buffer_unregister;
+
platform_set_drvdata(pdev, indio_dev);
return 0;
+err_buffer_unregister:
+ iio_buffer_unregister(indio_dev);
+err_free_irq:
+ free_irq(adc_dev->irq, indio_dev);
err_free_channels:
tiadc_channels_remove(indio_dev);
err_free_device:
@@ -265,7 +486,9 @@ static int tiadc_remove(struct platform_device *pdev)
struct tiadc_device *adc_dev = iio_priv(indio_dev);
u32 step_en;
+ free_irq(adc_dev->irq, indio_dev);
iio_device_unregister(indio_dev);
+ iio_buffer_unregister(indio_dev);
tiadc_channels_remove(indio_dev);
step_en = get_adc_step_mask(adc_dev);
@@ -303,10 +526,16 @@ static int tiadc_resume(struct device *dev)
/* Make sure ADC is powered up */
restore = tiadc_readl(adc_dev, REG_CTRL);
- restore &= ~(CNTRLREG_POWERDOWN);
+ restore &= ~(CNTRLREG_TSCSSENB);
tiadc_writel(adc_dev, REG_CTRL, restore);
- tiadc_step_config(adc_dev);
+ tiadc_writel(adc_dev, REG_FIFO1THR, FIFO1_THRESHOLD);
+ tiadc_step_config(indio_dev);
+
+ /* Make sure ADC is powered up */
+ restore &= ~(CNTRLREG_POWERDOWN);
+ restore |= CNTRLREG_TSCSSENB;
+ tiadc_writel(adc_dev, REG_CTRL, restore);
return 0;
}
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index e2db978..a1d22de 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -46,6 +46,9 @@
/* Step Enable */
#define STEPENB_MASK (0x1FFFF << 0)
#define STEPENB(val) ((val) << 0)
+#define ENB(val) (1 << (val))
+#define STPENB_STEPENB STEPENB(0x1FFFF)
+#define STPENB_STEPENB_TC STEPENB(0x1FFF)
/* IRQ enable */
#define IRQENB_HW_PEN BIT(0)
@@ -54,11 +57,14 @@
#define IRQENB_FIFO0UNDRFLW BIT(4)
#define IRQENB_FIFO1THRES BIT(5)
#define IRQENB_PENUP BIT(9)
+#define IRQENB_FIFO1OVRRUN BIT(6)
+#define IRQENB_FIFO1UNDRFLW BIT(7)
/* Step Configuration */
#define STEPCONFIG_MODE_MASK (3 << 0)
#define STEPCONFIG_MODE(val) ((val) << 0)
#define STEPCONFIG_MODE_HWSYNC STEPCONFIG_MODE(2)
+#define STEPCONFIG_MODE_SWCNT STEPCONFIG_MODE(1)
#define STEPCONFIG_AVG_MASK (7 << 2)
#define STEPCONFIG_AVG(val) ((val) << 2)
#define STEPCONFIG_AVG_16 STEPCONFIG_AVG(4)
@@ -126,7 +132,8 @@
#define MAX_CLK_DIV 7
#define TOTAL_STEPS 16
#define TOTAL_CHANNELS 8
-
+#define FIFO1_THRESHOLD 19
+#define FIFO_SIZE 64
/*
* ADC runs at 3MHz, and it takes
* 15 cycles to latch one data output.
@@ -155,6 +162,10 @@ struct ti_tscadc_dev {
/* adc device */
struct adc_device *adc;
+
+ /* Context save */
+ unsigned int irqstat;
+ unsigned int ctrl;
};
static inline struct ti_tscadc_dev *ti_tscadc_dev_get(struct platform_device *p)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
