If NO_DMA=y:
drivers/built-in.o: In function `usb_hcd_unmap_urb_setup_for_dma':
drivers/usb/core/hcd.c:1361: undefined reference to `dma_unmap_single'
drivers/built-in.o: In function `usb_hcd_unmap_urb_for_dma':
drivers/usb/core/hcd.c:1393: undefined reference to `dma_unmap_sg'
drivers/usb/core/hcd.c:1398: undefined reference to `dma_unmap_page'
drivers/usb/core/hcd.c:1403: undefined reference to `dma_unmap_single'
drivers/built-in.o: In function `usb_hcd_map_urb_for_dma':
drivers/usb/core/hcd.c:1445: undefined reference to `dma_map_single'
drivers/usb/core/hcd.c:1450: undefined reference to `dma_mapping_error'
drivers/usb/core/hcd.c:1480: undefined reference to `dma_map_sg'
drivers/usb/core/hcd.c:1495: undefined reference to `dma_map_page'
drivers/usb/core/hcd.c:1501: undefined reference to `dma_mapping_error'
drivers/usb/core/hcd.c:1507: undefined reference to `dma_map_single'
drivers/usb/core/hcd.c:1512: undefined reference to `dma_mapping_error'
drivers/built-in.o: In function `hcd_buffer_free':
drivers/usb/core/buffer.c:146: undefined reference to `dma_pool_free'
drivers/usb/core/buffer.c:150: undefined reference to `dma_free_coherent'
drivers/built-in.o: In function `hcd_buffer_destroy':
drivers/usb/core/buffer.c:90: undefined reference to `dma_pool_destroy'
drivers/built-in.o: In function `hcd_buffer_create':
drivers/usb/core/buffer.c:65: undefined reference to `dma_pool_create'
drivers/built-in.o: In function `hcd_buffer_alloc':
drivers/usb/core/buffer.c:120: undefined reference to `dma_pool_alloc'
drivers/usb/core/buffer.c:122: undefined reference to `dma_alloc_coherent'
,,,
Commit d9ea21a779278da06d0cbe989594bf542ed213d7 ("usb: host: make
USB_ARCH_HAS_?HCI obsolete") allowed to enable USB on platforms with
NO_DMA=y, and exposed several input and media USB drivers that just select
USB if USB_ARCH_HAS_HCD, without checking HAS_DMA.
Fix the former by making USB depend on HAS_DMA.
To fix the latter, instead of adding lots of "depends on HAS_DMA", make
those drivers depend on USB, instead of depending on USB_ARCH_HAS_HCD and
selecting USB. Drivers for other busses (e.g. MOUSE_SYNAPTICS_I2C) already
handle this in a similar way.
Signed-off-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
---
drivers/input/joystick/Kconfig | 3 +--
drivers/input/misc/Kconfig | 15 +++++----------
drivers/input/mouse/Kconfig | 9 +++------
drivers/input/tablet/Kconfig | 15 +++++----------
drivers/input/touchscreen/Kconfig | 3 +--
drivers/media/rc/Kconfig | 21 +++++++--------------
drivers/usb/Kconfig | 2 +-
7 files changed, 23 insertions(+), 45 deletions(-)
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 56eb471..d7e36fb 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -278,8 +278,7 @@ config JOYSTICK_JOYDUMP
config JOYSTICK_XPAD
tristate "X-Box gamepad support"
- depends on USB_ARCH_HAS_HCD
- select USB
+ depends on USB
help
Say Y here if you want to use the X-Box pad with your computer.
Make sure to say Y to "Joystick support" (CONFIG_INPUT_JOYDEV)
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 0b541cd..00cdecb 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -286,8 +286,7 @@ config INPUT_ATLAS_BTNS
config INPUT_ATI_REMOTE2
tristate "ATI / Philips USB RF remote control"
- depends on USB_ARCH_HAS_HCD
- select USB
+ depends on USB
help
Say Y here if you want to use an ATI or Philips USB RF remote control.
These are RF remotes with USB receivers.
@@ -301,8 +300,7 @@ config INPUT_ATI_REMOTE2
config INPUT_KEYSPAN_REMOTE
tristate "Keyspan DMR USB remote control"
- depends on USB_ARCH_HAS_HCD
- select USB
+ depends on USB
help
Say Y here if you want to use a Keyspan DMR USB remote control.
Currently only the UIA-11 type of receiver has been tested. The tag
@@ -333,8 +331,7 @@ config INPUT_KXTJ9_POLLED_MODE
config INPUT_POWERMATE
tristate "Griffin PowerMate and Contour Jog support"
- depends on USB_ARCH_HAS_HCD
- select USB
+ depends on USB
help
Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
These are aluminum dials which can measure clockwise and anticlockwise
@@ -349,8 +346,7 @@ config INPUT_POWERMATE
config INPUT_YEALINK
tristate "Yealink usb-p1k voip phone"
- depends on USB_ARCH_HAS_HCD
- select USB
+ depends on USB
help
Say Y here if you want to enable keyboard and LCD functions of the
Yealink usb-p1k usb phones. The audio part is enabled by the generic
@@ -364,8 +360,7 @@ config INPUT_YEALINK
config INPUT_CM109
tristate "C-Media CM109 USB I/O Controller"
- depends on USB_ARCH_HAS_HCD
- select USB
+ depends on USB
help
Say Y here if you want to enable keyboard and buzzer functions of the
C-Media CM109 usb phones. The audio part is enabled by the generic
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index effa9c5..90f8c0b 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -161,8 +161,7 @@ config MOUSE_SERIAL
config MOUSE_APPLETOUCH
tristate "Apple USB Touchpad support"
- depends on USB_ARCH_HAS_HCD
- select USB
+ depends on USB
help
Say Y here if you want to use an Apple USB Touchpad.
@@ -182,8 +181,7 @@ config MOUSE_APPLETOUCH
config MOUSE_BCM5974
tristate "Apple USB BCM5974 Multitouch trackpad support"
- depends on USB_ARCH_HAS_HCD
- select USB
+ depends on USB
help
Say Y here if you have an Apple USB BCM5974 Multitouch
trackpad.
@@ -346,8 +344,7 @@ config MOUSE_SYNAPTICS_I2C
config MOUSE_SYNAPTICS_USB
tristate "Synaptics USB device support"
- depends on USB_ARCH_HAS_HCD
- select USB
+ depends on USB
help
Say Y here if you want to use a Synaptics USB touchpad or pointing
stick.
diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig
index bed7cbf..8e27600 100644
--- a/drivers/input/tablet/Kconfig
+++ b/drivers/input/tablet/Kconfig
@@ -13,8 +13,7 @@ if INPUT_TABLET
config TABLET_USB_ACECAD
tristate "Acecad Flair tablet support (USB)"
- depends on USB_ARCH_HAS_HCD
- select USB
+ depends on USB
help
Say Y here if you want to use the USB version of the Acecad Flair
tablet. Make sure to say Y to "Mouse support"
@@ -26,8 +25,7 @@ config TABLET_USB_ACECAD
config TABLET_USB_AIPTEK
tristate "Aiptek 6000U/8000U and Genius G_PEN tablet support (USB)"
- depends on USB_ARCH_HAS_HCD
- select USB
+ depends on USB
help
Say Y here if you want to use the USB version of the Aiptek 6000U,
Aiptek 8000U or Genius G-PEN 560 tablet. Make sure to say Y to
@@ -51,8 +49,7 @@ config TABLET_USB_GTCO
config TABLET_USB_HANWANG
tristate "Hanwang Art Master III tablet support (USB)"
- depends on USB_ARCH_HAS_HCD
- select USB
+ depends on USB
help
Say Y here if you want to use the USB version of the Hanwang Art
Master III tablet.
@@ -62,8 +59,7 @@ config TABLET_USB_HANWANG
config TABLET_USB_KBTAB
tristate "KB Gear JamStudio tablet support (USB)"
- depends on USB_ARCH_HAS_HCD
- select USB
+ depends on USB
help
Say Y here if you want to use the USB version of the KB Gear
JamStudio tablet. Make sure to say Y to "Mouse support"
@@ -75,9 +71,8 @@ config TABLET_USB_KBTAB
config TABLET_USB_WACOM
tristate "Wacom Intuos/Graphire tablet support (USB)"
- depends on USB_ARCH_HAS_HCD
+ depends on USB
select POWER_SUPPLY
- select USB
select NEW_LEDS
select LEDS_CLASS
help
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 3b9758b..a889c52 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -689,8 +689,7 @@ config TOUCHSCREEN_WM97XX_ZYLONITE
config TOUCHSCREEN_USB_COMPOSITE
tristate "USB Touchscreen Driver"
- depends on USB_ARCH_HAS_HCD
- select USB
+ depends on USB
help
USB Touchscreen driver for:
- eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 5a79c33..ee59842 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -126,9 +126,8 @@ if RC_DEVICES
config RC_ATI_REMOTE
tristate "ATI / X10 based USB RF remote controls"
- depends on USB_ARCH_HAS_HCD
+ depends on USB
depends on RC_CORE
- select USB
help
Say Y here if you want to use an X10 based USB remote control.
These are RF remotes with USB receivers.
@@ -159,9 +158,8 @@ config IR_ENE
config IR_IMON
tristate "SoundGraph iMON Receiver and Display"
- depends on USB_ARCH_HAS_HCD
+ depends on USB
depends on RC_CORE
- select USB
---help---
Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
IR Receiver and/or LCD/VFD/VGA display.
@@ -171,9 +169,8 @@ config IR_IMON
config IR_MCEUSB
tristate "Windows Media Center Ed. eHome Infrared Transceiver"
- depends on USB_ARCH_HAS_HCD
+ depends on USB
depends on RC_CORE
- select USB
---help---
Say Y here if you want to use a Windows Media Center Edition
eHome Infrared Transceiver.
@@ -221,9 +218,8 @@ config IR_NUVOTON
config IR_REDRAT3
tristate "RedRat3 IR Transceiver"
- depends on USB_ARCH_HAS_HCD
+ depends on USB
depends on RC_CORE
- select USB
---help---
Say Y here if you want to use a RedRat3 Infrared Transceiver.
@@ -232,9 +228,8 @@ config IR_REDRAT3
config IR_STREAMZAP
tristate "Streamzap PC Remote IR Receiver"
- depends on USB_ARCH_HAS_HCD
+ depends on USB
depends on RC_CORE
- select USB
---help---
Say Y here if you want to use a Streamzap PC Remote
Infrared Receiver.
@@ -261,9 +256,8 @@ config IR_WINBOND_CIR
config IR_IGUANA
tristate "IguanaWorks USB IR Transceiver"
- depends on USB_ARCH_HAS_HCD
+ depends on USB
depends on RC_CORE
- select USB
---help---
Say Y here if you want to use the IguanaWorks USB IR Transceiver.
Both infrared receive and send are supported. If you want to
@@ -277,9 +271,8 @@ config IR_IGUANA
config IR_TTUSBIR
tristate "TechnoTrend USB IR Receiver"
- depends on USB_ARCH_HAS_HCD
+ depends on USB
depends on RC_CORE
- select USB
select NEW_LEDS
select LEDS_CLASS
---help---
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 73f62ca..c530ad9 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -33,7 +33,7 @@ config USB_ARCH_HAS_HCD
# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
config USB
tristate "Support for Host-side USB"
- depends on USB_ARCH_HAS_HCD
+ depends on USB_ARCH_HAS_HCD && HAS_DMA
select NLS # for UTF-8 strings
---help---
Universal Serial Bus (USB) is a specification for a serial bus
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
