Hi all, Sorry it took me some time to answer. I extended the Logitech HIDPP10 specification here: https://drive.google.com/folderview?id=0BxbRzx7vEV7eWmgwazJ3NUFfQ28&usp=sharing The document "Logitech_hidpp10_specification_draft_Unifying_devices_receivers.doc" now contains most of the relevant hidpp10 registers and notifications needed to interact with older Logitech devices that support hidpp10 as well as the Unifying receiver. In particular I added the specifications for the registers that enable retrieving the FW version information for devices/receivers. This will become relevant below. Cheers, Nestor On Thu, Jun 27, 2013 at 3:16 PM, Jiri Kosina <jkosina@xxxxxxx> wrote: > > > [ Frantisek Fuka added to CC ] > > On Wed, 14 Sep 2011, Benjamin Tissoires wrote: > > > >> Nice. Does this mean I will be able to use the thumb-button of my M705 > > >> mouse in the near future? > > >> > > >> (Someone asked the same question 1.5 years ago, but nothing happened > > >> till then: http://thread.gmane.org/gmane.linux.kernel.input/11791 ) > > > > > > This is quite weird. I was going to say that it will work, but with > > > the M705 I've got at home,this thumb button doesn't work at all > > > (anything is emitted from the usb, even with this driver). > > > But I'm pretty sure I made it work with the one I got at work. > > > > > > I'll give a try on Monday unless people at Logitech gave us the solution. > > > I got some information for you. Apparently, it won't be possible to > > enable this thumb button right now. > > To enable it, the Windows driver put the mouse in a kind of debug mode > > that need to be handled properly, which is not the case as of today. > > > > I was able to make it work at home because there were different series > > of M705, the latest sending the thumb button by default. > > Let me resurrect this 2 years old thread, as I have received multiple > reports since then, stating that some revisions of M705 don't have working > thumb button. > > Question mostly to the Logitech guys: Nestor, Olivier, could you please > provide us with the sequence that needs to be sent to (certain revisisons > of) M705 to let enter the debug mode, making the thumb button actually > emit a USB message? There are two versions of FW in the field: 1) Version 17.01.Build 0017. This version reports the thumb button by default as HID button 6. 2) Version 17.00.Build 0015 This version does not report the thumb button by default. It is possible to enable the M705 with FW 17.00.Build 0015 to send the thumb button as HID button 6 via HIDPP10 command. But this will have a (undesirable ?) side effect. Once the button 6 is enabled, the buttons aside to the wheel (tilt buttons) will no longer be reported as AC pan HID usage, they will be reported as buttons 7 & 8. This might disrupt some users that rely on the mouse AC pan feature. To enable HID button 6 reporting from thumb button we need to clear the bit 1 (Special button function) in register 0x01 on the M705 READ register: 10 IDX 81 01 r0 r1 r2 Clear Bit1: r0 &= 0xFD; Write back register: 10 IDX 80 01 r0 r1 r2 IDX is the device index on the Unifying receiver. Note that if the command is sent to all M705 devices, users that have the 17.01.Build 0017 will lose the Ac pan and will gain nothing. > > Thanks, > > -- > Jiri Kosina > SUSE Labs > -- > To unsubscribe from this list: send the line "unsubscribe linux-input" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
